GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Easy-Jtag / Easy-Jtag Plus (https://forum.gsmhosting.com/vbb/f672/)
-   -   EasyJTAG Box Addon "Emmc File Manager" addon Released. (https://forum.gsmhosting.com/vbb/f672/easyjtag-box-addon-emmc-file-manager-addon-released-2210118/)

NoName 03-31-2017 14:09

EasyJTAG Box Addon "Emmc File Manager" addon Released.
 
1 Attachment(s)
Z3X Emmc File Manager V1.0 addon Released.

http://forum.gsmhosting.com/vbb/atta...1&d=1490977425


About this update:

- The project is written "from scratch"
- The project is fully translated into C ++
- A brand-new NATIVE engine-driver for accessing the EXT2 / 3/4 File System
- All the functions of scanning partitions have been reworked.
- The ability to open a separately read partition without markup
- Partition manager in the form of a tree with information
- Full-featured file manager with the ability to view information, multiple choice of files
- Hot Links button for frequently accessing files (Contacts \ SMS \ Passwords, etc.)
- The ability to save both individual files and folders
- The ability to sort Files by Name \ Type \ Size \
- Ability to change the style of displaying files / folders
- Copying file / folder names to the clipboard
- Ability to quickly view a single file
- Reading section information
- Address bar with manual address input support
- Automatic folder structure buffering
- Automatic read buffer, which maximizes file read speed
- No hanging of the interface
- Saving the entire partition to the BIN format
- HiPower CLK Support
- Support voltage EMMC 1.8 / 2.8 / 3.3 volts
- Supports CLK bus frequency up to 21 MHz

Check EmmcFilemanagerManagerAddon_v1.3.exe on support.

ali1371 03-31-2017 15:47

Quote:

Originally Posted by NoName (Post 12426024)
Z3X Emmc File Manager addon Released.

  • The project is written "from scratch"
  • The project is fully translated into C ++
  • A brand-new NATIVE engine-driver for accessing the EXT2 / 3/4 File System
  • All the functions of scanning partitions have been reworked.
  • The ability to open a separately read partition without markup
  • Partition manager in the form of a tree with information
  • Full-featured file manager with the ability to view information, multiple choice of files
  • Hot Links button for frequently accessing files (Contacts \ SMS \ Passwords, etc.)
  • The ability to save both individual files and folders
  • The ability to sort Files by Name \ Type \ Size \
  • Ability to change the style of displaying files / folders
  • Copying file / folder names to the clipboard
  • Ability to quickly view a single file
  • Reading section information
  • Address bar with manual address input support
  • Automatic folder structure buffering
  • Automatic read buffer, which maximizes file read speed
  • No hanging of the interface
  • Saving the entire partition to the BIN format
  • HiPower CLK Support
  • Support voltage EMMC 1.8 / 2.8 / 3.3 volts
  • Supports CLK bus frequency up to 21 MHz

Check EmmcFilemanagerManagerAddon_v1.3.exe on support.

Great

Sent from my LG-D855 using Tapatalk

shivapradhan0 03-31-2017 18:22

Wow..unbelievable release..nice work team..great addon for all.plz team also add repair file and pinout for more running models


Sent by shivapradhan0 (Pradhan Mobile House)

lihua 03-31-2017 23:10

IPhone Nand Flash can work????????????????????

Deepesh Sharma 04-01-2017 05:40

what about samsung j200g dead repair after file write sucessfully but set not alive asking for spd driver set still dead. image was send to team via sonork, but can't get response
Thanks you

laltu10 04-01-2017 05:48

Quote:

Originally Posted by noname (Post 12426024)
z3x emmc file manager v1.0 addon released.

http://forum.gsmhosting.com/vbb/atta...1&d=1490977425


about this update:

- the project is written "from scratch"
- the project is fully translated into c ++
- a brand-new native engine-driver for accessing the ext2 / 3/4 file system
- all the functions of scanning partitions have been reworked.
- the ability to open a separately read partition without markup
- partition manager in the form of a tree with information
- full-featured file manager with the ability to view information, multiple choice of files
- hot links button for frequently accessing files (contacts \ sms \ passwords, etc.)
- the ability to save both individual files and folders
- the ability to sort files by name \ type \ size \
- ability to change the style of displaying files / folders
- copying file / folder names to the clipboard
- ability to quickly view a single file
- reading section information
- address bar with manual address input support
- automatic folder structure buffering
- automatic read buffer, which maximizes file read speed
- no hanging of the interface
- saving the entire partition to the bin format
- hipower clk support
- support voltage emmc 1.8 / 2.8 / 3.3 volts
- supports clk bus frequency up to 21 mhz

check emmcfilemanagermanageraddon_v1.3.exe on support.

hello team need full support hynix and micron emmc many motorola lg athers set not recover plz add full support

KrzychuG 04-01-2017 10:59

Any plans on allowing you to modify the data on ext4 partitions. For example, in case if someone wants to remove the user code etc.

antinachai 04-01-2017 13:44

Quote:

Originally Posted by KrzychuG (Post 12427505)
Any plans on allowing you to modify the data on ext4 partitions. For example, in case if someone wants to remove the user code etc.

In progress...
Wait & See....

alex_030385 04-02-2017 05:34

hello sir can you add emmc bypass for icloud for apple device...

violetta 04-02-2017 06:56

waiting and waiting.....

vorasalim 04-02-2017 18:54

z3x emmc file manager v1.0 addon released
 
where is setup sir ji



thank

vorasalim 04-02-2017 18:56

z3x emmc file manager v1.0 addon released
 
ya i got it ok


thanks

saifulsikder3 04-03-2017 09:19

z3x emmc file manager need video tutorial

NoName 04-03-2017 12:52

Quote:

Originally Posted by Deepesh Sharma (Post 12426958)
what about samsung j200g dead repair after file write sucessfully but set not alive asking for spd driver set still dead. image was send to team via sonork, but can't get response
Thanks you

Hello , dear , please your steps and opertion log.

Deepesh Sharma 04-03-2017 13:31

Quote:

Originally Posted by NoName (Post 12430928)
Hello , dear , please your steps and opertion log.

here my screen shot i wait for team
and i try with single file but result same
https://s20.postimg.org/t38rqocq5/image.png

parsa_dig 04-03-2017 16:25

hi
i have problem in recovering camera picture, when i select all picture after extract output is just a picture with "#63#63#63#63#63#63#63#63_#63#63#63#63#63#63" name
that seem sw cannot keep files and replace them

kwaku85 04-04-2017 10:26

Quote:

Originally Posted by alex_030385 (Post 12428705)
hello sir can you add emmc bypass for icloud for apple device...

Yes. Probably right after Apple start mounting EMMC memory chips inside iPhones...

Sniper_04 04-04-2017 16:13

Hi,
Nice update..
But im waiting for the resizing userdata?

Example the original emmc is 8gb and i want to change 32gb
So need to change the partition size of userdata


Br,


Sent from my iPhone using Tapatalk

thienglong-tv19 04-06-2017 15:17

speed write dump emmc EasyJTAG very very slow :D

dey mobiles 04-07-2017 05:58

Quote:

Originally Posted by Sniper_04 (Post 12433327)
Hi,
Nice update..
But im waiting for the resizing userdata?

Example the original emmc is 8gb and i want to change 32gb
So need to change the partition size of userdata


Br,


Sent from my iPhone using Tapatalk

Yes We Need This Spacial Update;)




Br,

Deepesh Sharma 04-09-2017 05:50

Quote:

Originally Posted by Deepesh Sharma (Post 12431040)
here my screen shot i wait for team
and i try with single file but result same
https://s20.postimg.org/t38rqocq5/image.png

is any solution available for me or need to open new thread here to highlight my subject.

Rteam2005 04-13-2017 10:15

waiting and waiting.....

lihua 04-16-2017 00:34

waiting.....add emmc bypass for icloud for apple device...

KrzychuG 04-16-2017 10:02

Quote:

Originally Posted by lihua (Post 12452015)
waiting.....add emmc bypass for icloud for apple device...

As it's been said before, Apple devices does not use eMMC so this is not gonna happend with z3x.

maysamrast 04-22-2017 09:55

very useful tool thanks

ilyasrao 04-22-2017 15:40

Quote:

Originally Posted by Deepesh Sharma (Post 12440887)
is any solution available for me or need to open new thread here to highlight my subject.

write only bl file after that phone will able to boot in download (ODIN)mode
and u can flash it with 4files repartition with Z3X or ODIN ETC......

premsharma 04-28-2017 18:41

Quote:

Originally Posted by Deepesh Sharma (Post 12426958)
what about samsung j200g dead repair after file write sucessfully but set not alive asking for spd driver set still dead. image was send to team via sonork, but can't get response
Thanks you

Rightly said i tried with dump file and md5 aswell. On both the process write was successful but the handset (j200g) remained dead with spd port.

premsharma 04-28-2017 18:45

Quote:

Originally Posted by ilyasrao (Post 12462383)
write only bl file after that phone will able to boot in download (ODIN)mode
and u can flash it with 4files repartition with Z3X or ODIN ETC......

Does not work with j200g, its tested

yomito123 05-29-2017 04:52

Any plans on allowing you to modify the data on ext4 partitions. For example, in case if someone wants to remove the user code

yomito123 05-29-2017 13:13

hello sir can you add emmc bypass for icloud for apple device.

mister magoo 05-30-2017 04:36

can anybody help me !! J7 excel repaired and certified by z3x all in order !! But after hard reset factory is only on emergency call, what do i have to do to not lose the certification of imei after hard reset ..

chemik007 07-03-2018 12:01

add-on license
 
Is this add-in able to recover data from the ntfs nokia windows mobile partition? At the moment, without a license, I only have the appearance of the partition size.
License purchase possible only on the Russian-language website of the producer?

http://v-lab.pl/ntfs.jpg

chemik007 07-03-2018 12:03

Will the files from the partition "DATA" in the photo be visible?

layder 07-09-2018 08:17

to recover files you may use easyjtag_emmc_plus_1.5.1
to recover phonebook/viber/wattsapp/messages you need to buy license

1.16 version available at shell

layder 08-06-2018 18:07

Z3X Emmc Manager 1.17 release

!! Requires firmware v1 of the box> = 1.62 / v2 of the box> = 2.29 !!
!! The program requires the activated Z3X CARD (JTAG) !!

- Updated SQLite library to 3.24.0
- Fixed bug when extracting contacts
- Fixed bug when closing session resulting in data corruption
- Improved extraction from store.vol (additional fields)
- New store.vol location paths added
- Improved detection of contact names when retrieving from store.vol
- Added blocking of voltage selection when working in E-Socket mode (v2 Box)
- Enhanced Extensensic mode
- Added support for markup for nVidia from Rom2 / Rom3
- Mass change of Attributes for selected files / folders is added
- Added change / mass change UID / GID for selected files / folders (EXT4)
- Added the ability to bulk upload files / folders to EXT4 / FAT (Upload Folder)
- Added automatic saving and restoration of Attributes / UID / GID / XATTR when replacing the file (EXT4 / FAT)
- For the first time in the World - SELinux / XATTR support for EXT4
- Added display of all SELinux / XATTR in the Properties window (View Properties)
- Added Add / Edit / Bulk add / change SELinux / XATTR for selected files / folders (EXT4)
- Changed default rights for new files / folders when creating (EXT4) Files - 644, folders - 775, symlink - 775
- Added Removing Notes from Samsung Devices (Tools / Extract tab of Samsung Memo)
- Added extraction of Notes from Notepad ++ application (Tools / Extract Contacts / SMS tab)
- Added extraction of Notes from the GreenDield application (Tools / Extract Contacts / SMS tab)
- Added Extract Hash and Salt for hacking Android Password (Crack Android PIN Code)
- Added automatic decryption of Android PIN (digital password) for Android 2.xx - 5.xx (Crack Android PIN Code)
- Added the change of the mount point of the partition after recording by vendor (Requires HTC, etc. otherwise bootloop)
- Added verification for writing / erasing, (Disable in settings - Check Write / Erase Data)
- Added shortening of logs when retrieving data (Disable in settings - Show Less Debug Data)
- Added fast check of sections on "emptiness" (Thanks to InfinityBox / JayDi) (Disables in settings - Empty Check)
- Many small and inconspicuous changes =)

Empty test is displayed when accessing a section on the Browser tab:
TRUE = Section is empty,
FALSE = Data is in the partition,
DATA = The partition contains the file system.

Decryption Android PIN supports Android 2.xx - 5.xx, file password.key, gatekeeper. * NOT supported.

Decryption of the alphanumeric password takes a long time, therefore it is not implemented. Use third-party utilities. (For example - oclHashCat)

Adding / Changing SELinux / XATTR - requires knowledge of these add-ons. security rights. Do not try to enter incorrect values.


Some function are requared third party licence (world licence)
http://www.uo5oq.com/index.php?do=us...&productid=646

download: https://mega.nz/#!eMAESIrT!KZcoNdfpB...oBRjuAO0HG4a1E

Sakalalina 09-12-2018 09:06

i love this tool, i've recovered many and many data from emmc!
I got one question now...i have to recover some data from a Huawei EMMC, the model of the phone is: WAS-LX1A...the tool can detect it correctly, and can mount system and other partition, but not userdata...
it's due to an encryption?

Code:

Z3X EasyJtag EMMC File Manager v 1.17-CPP Rel at 05/08/2018 started..
EasyAPI version: [2100]
Easy FileSystem version: [05082018]
SQLite Engine version: [3.24.0]
Fsck API version: [05082018]
Ese API version: [05082018]
Z3X Card Serial:
EasyJtag PLUS Box Found at [COM8]
EasyJtag Box Firmware: [2.30]

Generation: GPT [QC/SAMS]
Box Voltage set to: [2800] mV
Scanner Thread Created.
Setup HiPower CLK: [OFF]
Connecting To EasyJtag Box: [2800mV/42MHz/8BIT]
EasyJtag Box Found! Result: [0/OK]
EasyJtag S/N:
EasyJtag Firm: [2.30]

Box Bus Width = 8 BIT
Box Hardware  = EasyJtag 2nd Generation

Search EMMC Chip...

Testing Box Interface
 PIN CLK : 1724 mV - Pin OK
 PIN CMD : 1732 mV - Pin OK
 PIN DAT0: 1734 mV - Pin OK
 PIN DAT1: 1728 mV - Pin OK
 PIN DAT2: 1729 mV - Pin OK
 PIN DAT3: 1729 mV - Pin OK
 PIN DAT4: 1734 mV - Pin OK
 PIN DAT5: 1730 mV - Pin OK
 PIN DAT6: 1727 mV - Pin OK
 PIN DAT7: 1729 mV - Pin OK
Test End

EMMC Chip Found! [0/OK]
EMMC CID: [90014A484247346132D405C080BA546B]
EMMC CSD: [D02701328F5903FFFFFFFFE78A400017]
EMMC VENDOR: [SKHYNIX]
EMMC NAME: [HBG4a2]
EMMC ROM1 Size: [61071360 Block(s)/29820 MB]
EMMC ROM2/3 Size: [8192 Block(s)/4096 KB]
EMMC RPMB Size: [8192 Block(s)/4096 KB]
Switch To ROM1 Part: [0/OK]

Scanning Data From EMMC. Please wait..

Found GPT Table at 0x000000000200
Max Parts: [128]

GPT: VRL            [000000080000/000000040000] SIZE: 256,00 KB
GPT: VRL_BACKUP      [0000000C0000/000000040000] SIZE: 256,00 KB
GPT: FW_LPM3        [000000100000/000000040000] SIZE: 256,00 KB
GPT: FRP            [000000140000/0000000C0000] SIZE: 768,00 KB
GPT: FASTBOOT        [000000200000/000000400000] SIZE: 4,00 MB
GPT: MODEMNVM_FACTORY  [000000600000/000000400000] SIZE: 4,00 MB
GPT: NVME            [000000A00000/000000600000] SIZE: 6,00 MB
GPT: OEMINFO        [000001000000/000004000000] SIZE: 64,00 MB
GPT: RESERVED3      [000005000000/000000400000] SIZE: 4,00 MB
GPT: MODEMNVM_BACKUP  [000005400000/000000400000] SIZE: 4,00 MB
GPT: MODEMNVM_IMG    [000005800000/000000800000] SIZE: 8,00 MB
GPT: MODEMNVM_SYSTEM  [000006000000/000000400000] SIZE: 4,00 MB
GPT: SECURE_STORAGE  [000006400000/000002000000] SIZE: 32,00 MB
GPT: RESERVED4      [000008400000/000000200000] SIZE: 2,00 MB
GPT: RESERVED5      [000008600000/000000200000] SIZE: 2,00 MB
GPT: PERSIST        [000008800000/000000200000] SIZE: 2,00 MB
GPT: RESERVED1      [000008A00000/000000E00000] SIZE: 14,00 MB
GPT: MODEM_OM        [000009800000/000002000000] SIZE: 32,00 MB
GPT: SPLASH2        [00000B800000/000004000000] SIZE: 64,00 MB
GPT: MISC            [00000F800000/000000200000] SIZE: 2,00 MB
GPT: MODEMNVM_UPDATE  [00000FA00000/000001800000] SIZE: 24,00 MB
GPT: RESERVED2      [000011200000/000003C00000] SIZE: 60,00 MB
GPT: TEEOS          [000014E00000/000000400000] SIZE: 4,00 MB
GPT: TRUSTFIRMWARE  [000015200000/000000200000] SIZE: 2,00 MB
GPT: SENSORHUB      [000015400000/000001000000] SIZE: 16,00 MB
GPT: FW_HIFI        [000016400000/000000C00000] SIZE: 12,00 MB
GPT: ERECOVERY_KERNEL  [000017000000/000001800000] SIZE: 24,00 MB
GPT: ERECOVERY_RAMDISK  [000018800000/000002000000] SIZE: 32,00 MB
GPT: ERECOVERY_VENDOR  [00001A800000/000001000000] SIZE: 16,00 MB
GPT: KERNEL          [00001B800000/000001800000] SIZE: 24,00 MB
GPT: RAMDISK        [00001D000000/000001000000] SIZE: 16,00 MB
GPT: RECOVERY_RAMDISK  [00001E000000/000002000000] SIZE: 32,00 MB
GPT: RECOVERY_VENDOR  [000020000000/000001000000] SIZE: 16,00 MB
GPT: DTS            [000021000000/000001C00000] SIZE: 28,00 MB
GPT: DTO            [000022C00000/000000400000] SIZE: 4,00 MB
GPT: MODEM_FW        [000023000000/000006000000] SIZE: 96,00 MB
GPT: RECOVERY_VBMETA  [000029000000/000000100000] SIZE: 1,00 MB
GPT: ERECOVERY_VBMETA  [000029100000/000000100000] SIZE: 1,00 MB
GPT: RESERVED8      [000029200000/000000200000] SIZE: 2,00 MB
GPT: DFX            [000029400000/000001000000] SIZE: 16,00 MB
GPT: VBMETA          [00002A400000/000000400000] SIZE: 4,00 MB
GPT: CACHE          [00002A800000/000008000000] SIZE: 128,00 MB
GPT: ODM            [000032800000/000008000000] SIZE: 128,00 MB
GPT: HISITEST0      [00003A800000/000000200000] SIZE: 2,00 MB
GPT: HISITEST1      [00003AA00000/000000200000] SIZE: 2,00 MB
GPT: HISITEST2      [00003AC00000/000000400000] SIZE: 4,00 MB
GPT: PATCH          [00003B000000/000002000000] SIZE: 32,00 MB
GPT: BOOTFAIL_INFO  [00003D000000/000000200000] SIZE: 2,00 MB
GPT: RRECORD        [00003D200000/000001000000] SIZE: 16,00 MB
GPT: RESERVED9      [00003E200000/000001E00000] SIZE: 30,00 MB
GPT: SYSTEM          [000040000000/000125000000] SIZE: 4,58 GB
GPT: CUST            [000165000000/00000C000000] SIZE: 192,00 MB
GPT: VERSION        [000171000000/000002000000] SIZE: 32,00 MB
GPT: VENDOR          [000173000000/000031000000] SIZE: 784,00 MB
GPT: PRODUCT        [0001A4000000/00000C000000] SIZE: 192,00 MB
GPT: USERDATA        [0001B0000000/000597C00000] SIZE: 22,37 GB

Partition #11  mount as [/mnvm2:0] -> [8,00 MB]
Partition #13  mount as [/sec_storage] -> [32,00 MB]
Partition #18  mount as [/modem_log] -> [32,00 MB]
Partition #19  mount as [/splash2] -> [64,00 MB]
Partition #36  mount as [/dev_36] -> [96,00 MB]
Partition #42  mount as [/cache] -> [128,00 MB]
Partition #43  mount as [/dev_43] -> [128,00 MB]
Partition #51  mount as [/dev_51] -> [4,58 GB]
Partition #52  mount as [/dev_52] -> [192,00 MB]
Partition #53  mount as [/dev_53] -> [32,00 MB]
Partition #54  mount as [/dev_54] -> [784,00 MB]
Partition #55  mount as [/dev_55] -> [192,00 MB]

EmptyCheck: Done

Scanner Thread Terminated, Elapsed: [00:00:02:361]
Found 56 Partition(s)..
Scan Done. Init Engine...

Resetting EasyJtag Box. Wait..
Reader Engine Initialized.. [0/OK]
Generation: GPT [QC/SAMS]
Bus Mode: [8BIT]
Operation Done. [Init Engine], Elapsed: [00:00:00:894]


wgmmmx1 10-05-2018 21:06

Quote:

Originally Posted by layder (Post 13256747)
Z3X Emmc Manager 1.17 release

!! Requires firmware v1 of the box> = 1.62 / v2 of the box> = 2.29 !!
!! The program requires the activated Z3X CARD (JTAG) !!

- Updated SQLite library to 3.24.0
- Fixed bug when extracting contacts
- Fixed bug when closing session resulting in data corruption
- Improved extraction from store.vol (additional fields)
- New store.vol location paths added
- Improved detection of contact names when retrieving from store.vol
- Added blocking of voltage selection when working in E-Socket mode (v2 Box)
- Enhanced Extensensic mode
- Added support for markup for nVidia from Rom2 / Rom3
- Mass change of Attributes for selected files / folders is added
- Added change / mass change UID / GID for selected files / folders (EXT4)
- Added the ability to bulk upload files / folders to EXT4 / FAT (Upload Folder)
- Added automatic saving and restoration of Attributes / UID / GID / XATTR when replacing the file (EXT4 / FAT)
- For the first time in the World - SELinux / XATTR support for EXT4
- Added display of all SELinux / XATTR in the Properties window (View Properties)
- Added Add / Edit / Bulk add / change SELinux / XATTR for selected files / folders (EXT4)
- Changed default rights for new files / folders when creating (EXT4) Files - 644, folders - 775, symlink - 775
- Added Removing Notes from Samsung Devices (Tools / Extract tab of Samsung Memo)
- Added extraction of Notes from Notepad ++ application (Tools / Extract Contacts / SMS tab)
- Added extraction of Notes from the GreenDield application (Tools / Extract Contacts / SMS tab)
- Added Extract Hash and Salt for hacking Android Password (Crack Android PIN Code)
- Added automatic decryption of Android PIN (digital password) for Android 2.xx - 5.xx (Crack Android PIN Code)
- Added the change of the mount point of the partition after recording by vendor (Requires HTC, etc. otherwise bootloop)
- Added verification for writing / erasing, (Disable in settings - Check Write / Erase Data)
- Added shortening of logs when retrieving data (Disable in settings - Show Less Debug Data)
- Added fast check of sections on "emptiness" (Thanks to InfinityBox / JayDi) (Disables in settings - Empty Check)
- Many small and inconspicuous changes =)

Empty test is displayed when accessing a section on the Browser tab:
TRUE = Section is empty,
FALSE = Data is in the partition,
DATA = The partition contains the file system.

Decryption Android PIN supports Android 2.xx - 5.xx, file password.key, gatekeeper. * NOT supported.

Decryption of the alphanumeric password takes a long time, therefore it is not implemented. Use third-party utilities. (For example - oclHashCat)

Adding / Changing SELinux / XATTR - requires knowledge of these add-ons. security rights. Do not try to enter incorrect values.


Some function are requared third party licence (world licence)
, , - NCK, RPL, , GSM

download: https://mega.nz/#!eMAESIrT!KZcoNdfpB...oBRjuAO0HG4a1E


How can buy this someone from europe ? I try liqpay and visa metode to add money to account but both not work with my visa credits card always error.

yuluosheng 10-06-2018 22:50

Update spa CPU support jtag writes

layder 10-07-2018 00:03

Quote:

Originally Posted by wgmmmx1 (Post 13352468)
How can buy this someone from europe ? I try liqpay and visa metode to add money to account but both not work with my visa credits card always error.

Try to write to uo5oq support: http://www.uo5oq.com/index.php?do=private&go=newpm

[email protected] 03-01-2019 16:28

I paid them by PayPal 2 days ago. Got Activation in 30 min

layder 05-27-2019 10:22

5 Attachment(s)
EasyJTAG Files Manager test version added UFS interface

Samsung S6/S6 edge (non crypted) can extract userdata

layder 10-24-2019 10:33

Official support https://t.me/joinchat/Ci7K71Ey6ohvYmNvjZ47bA

oktay50000 10-25-2019 05:34

is it possible to do on chip ufs?

sktamrkar 10-25-2019 10:40

Quote:

Originally Posted by layder (Post 13256747)
Z3X Emmc Manager 1.17 release

!! Requires firmware v1 of the box> = 1.62 / v2 of the box> = 2.29 !!
!! The program requires the activated Z3X CARD (JTAG) !!

- Updated SQLite library to 3.24.0
- Fixed bug when extracting contacts
- Fixed bug when closing session resulting in data corruption
- Improved extraction from store.vol (additional fields)
- New store.vol location paths added
- Improved detection of contact names when retrieving from store.vol
- Added blocking of voltage selection when working in E-Socket mode (v2 Box)
- Enhanced Extensensic mode
- Added support for markup for nVidia from Rom2 / Rom3
- Mass change of Attributes for selected files / folders is added
- Added change / mass change UID / GID for selected files / folders (EXT4)
- Added the ability to bulk upload files / folders to EXT4 / FAT (Upload Folder)
- Added automatic saving and restoration of Attributes / UID / GID / XATTR when replacing the file (EXT4 / FAT)
- For the first time in the World - SELinux / XATTR support for EXT4
- Added display of all SELinux / XATTR in the Properties window (View Properties)
- Added Add / Edit / Bulk add / change SELinux / XATTR for selected files / folders (EXT4)
- Changed default rights for new files / folders when creating (EXT4) Files - 644, folders - 775, symlink - 775
- Added Removing Notes from Samsung Devices (Tools / Extract tab of Samsung Memo)
- Added extraction of Notes from Notepad ++ application (Tools / Extract Contacts / SMS tab)
- Added extraction of Notes from the GreenDield application (Tools / Extract Contacts / SMS tab)
- Added Extract Hash and Salt for hacking Android Password (Crack Android PIN Code)
- Added automatic decryption of Android PIN (digital password) for Android 2.xx - 5.xx (Crack Android PIN Code)
- Added the change of the mount point of the partition after recording by vendor (Requires HTC, etc. otherwise bootloop)
- Added verification for writing / erasing, (Disable in settings - Check Write / Erase Data)
- Added shortening of logs when retrieving data (Disable in settings - Show Less Debug Data)
- Added fast check of sections on "emptiness" (Thanks to InfinityBox / JayDi) (Disables in settings - Empty Check)
- Many small and inconspicuous changes =)

Empty test is displayed when accessing a section on the Browser tab:
TRUE = Section is empty,
FALSE = Data is in the partition,
DATA = The partition contains the file system.

Decryption Android PIN supports Android 2.xx - 5.xx, file password.key, gatekeeper. * NOT supported.

Decryption of the alphanumeric password takes a long time, therefore it is not implemented. Use third-party utilities. (For example - oclHashCat)

Adding / Changing SELinux / XATTR - requires knowledge of these add-ons. security rights. Do not try to enter incorrect values.


Some function are requared third party licence (world licence)
, , - NCK, RPL, , GSM

download: https://mega.nz/#!eMAESIrT!KZcoNdfpB...oBRjuAO0HG4a1E

Sir link is broken. Plz give another link.

Thnx

layder 10-25-2019 12:00

1.17 version is present at shell

Worldeasy 09-07-2020 01:02

Quote:

Originally Posted by layder (Post 13673172)
EasyJTAG Files Manager test version added UFS interface

Samsung S6/S6 edge (non crypted) can extract userdata

thank you very much for the support brother

haoyagang 09-08-2020 07:55

:Dhank you very much:p

JmanuelSantos 10-16-2020 23:06

Emmc Manager
 
emmc file manager is asking for activation so i can mount read/write where can i buy activation?

layder 10-17-2020 11:23

Quote:

Originally Posted by JmanuelSantos (Post 14242719)
emmc file manager is asking for activation so i can mount read/write where can i buy activation?

http://www.uo5oq.com/index.php?do=us...&productid=646

Gulzar-Ahmad 10-17-2020 15:15

For instant Write to me :)
 
Quote:

Originally Posted by JmanuelSantos (Post 14242719)
emmc file manager is asking for activation so i can mount read/write where can i buy activation?

https://t.me/naJrazluG
https://wa.me/923007922599?text=


All times are GMT +1. The time now is 23:47.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -

Page generated in 0.37875 seconds with 6 queries

SEO by vBSEO