EasyJTAG Tool and EasyJTAG Plus
 

any model mobile

-----------------------------------------------------------------------
Change EasyJTAG Pinout OK
Z3X EasyJtag Software ver. 3.7.0.24
Loading eMMC GEN1 Firmware... IO: 3300 mV
Box S/N: 04FFA01CF1EBA3D1, ,FW Ver.: 01.63
CMD Pullup Level:2464 mV
CMD Active Level:2701 mV
Box IO Level:3300 mV
CLK Rate:21000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
Can't init device, Reason: CMD Timeout Error
Done.
-------------------------------------------------------------------------
Looking for EasyJTAG box...
EasyJTAG API ver. 3403
EasyJTAG Box Serial = 04FFA01CF1EBA3D1
Card Serial = AACE2268
EasyJTAG Box Firmware = 1.6300

Changelog:

05.05.2021 (ver 1.6.6.0)
Add: New keys for Oppo unpack
Fix: Bugs that have been found through your crash report
05.05.2021 (ver 2.0.1.0)
Add: Vendor LG
Add: Mediatek Preloader Parser
Add: OnePlus Unpacker
Add: Xiaomi Custom EDL Authorization
Add: Xiaomi Remove Mi Account (only Qualcomm)

HiPower mode is ON

HiPower mode is ON
Setting frequence to 21 MHz
CMD Pullup Level: 1515 mV
CMD Active Level: 1753 mV
Can't init device. Reason: CMD Timeout Error


PLZ HELP