GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Easy-Jtag / Easy-Jtag Plus (https://forum.gsmhosting.com/vbb/f672/)
-   -   eMMC Direct Pinout Collection. \m/ (https://forum.gsmhosting.com/vbb/f672/emmc-direct-pinout-collection-m-1717874/)

aman_aks87 05-02-2015 19:26

Quote:

Originally Posted by oktay50000 (Post 11010955)

HELP bro

I am use

VCC = 3.3
VCCQ= 1.8

Code:

Z3X EasyJtag Software ver. 1.9.1.3
Loading eMMC Addon Firmware... IO: 3300 mV
Box S/N: xxxxxxxxxxxxxxx, ,FW Ver.: 01.52
CMD Pullup Level:1711 mV
CMD Active Level:1876 mV
eMMC Device Information
EMMC CID : 65646F4D204D4F5200000000000000A4
EMMC CSD : D07FFF320F59007FF6DB80001E40001C
EMMC Manufacturer ID: 0065 , OEM ID: 646F
EMMC Date: 00/2013 Rev.0x0
EMMC NAME: M MOR , S/N: 0
EMMC NAME (HEX): 4D204D4F522000
Can't init EMMC, Reason: CARD Data FIFO Timeout Error
Check Data Line!
Done.


aman_aks87 05-02-2015 20:36

Code:

Z3X EasyJtag Software ver. 1.9.1.3
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 0303041E4A684F88, ,FW Ver.: 01.52
CMD Pullup Level:1722 mV
CMD Active Level:2072 mV
eMMC Device Information
EMMC CID : 65646F4D204D4F5200000000000000A4
EMMC CSD : D07FFF320F59007FF6DB80001E40001C
EMMC Manufacturer ID: 0065 , OEM ID: 646F
EMMC Date: 00/2013 Rev.0x0
EMMC NAME: M MOR , S/N: 0
EMMC NAME (HEX): 4D204D4F522000
EMMC ROM1 (Main User Data) Capacity: 128 MB
EMMC ROM2 (Boot Partition 1) Capacity: 0 kB
EMMC ROM3 (Boot Partition 2) Capacity: 0 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 0 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: M MOR _ 0_20150400_0100.extcsd
Done.


connected

NEED HTC DESIRE SV DUMP FILE

mojahed.br 05-02-2015 22:38

Emmc pinout sm-g350E

maxomos 05-03-2015 18:34

does any one has pin outs for karbonn s400 / flare 2.0 emmc? any help would be very appreciated thanks..

RfQ 05-04-2015 22:40

Does anyone have the pinout for the Samsung Galaxy Core Plus SM-G350?

kodan 05-05-2015 22:57

I9060i EMMC
 
1 Attachment(s)
Does anyone know pinout for this type emmc : D0 ,CMD ,CLK, 18V,3,3V,
EMMC was removed from samsung I9060i :eek:

mojahed.br 05-06-2015 13:46

plese need emmc pinout htc desire 606w and room

Mansour Pakdel 05-06-2015 13:46

G900I direct emmc
 
here first in the world sm-g900i direct emmc :D
http://i61.tinypic.com/153pdme.png

MR.WNKA 05-07-2015 21:23

s6312 direct emmc if some one have it

salim1996 05-08-2015 00:32

needed emmc pinout for samsung i9003

eddel 05-08-2015 20:51

please,needed emmc pinout for samsung GT-S5282

viewprofile 05-10-2015 00:14

EasyJTAG >>> Samsung S6802
 
Quote:

Originally Posted by KE6SOLTI (Post 10060802)
samsung s6802 direct emmc pinouts.tested by me
http://i60.tinypic.com/2dqumh.jpg

contact me on yahoo.it you need any pinouts.i will try to find. :)

could you please show me the procedure in easyJTAG program, because i dont see this model in list?


Thanks

toninhosantos 05-11-2015 03:50

Quote:

Originally Posted by dharyadi (Post 10961086)
ANYONE TESTED THIS PINOUT, SAMSUNG S6810 MMC PINOUT
NOT CLEAR ON DO AND CMD POINT.
http://s28.postimg.org/th2aedsfd/SAM...ect_pinout.jpg

I also can't connect the emmc chip. Bad picture.

huzein 05-11-2015 06:43

Quote:

Originally Posted by Mansour Pakdel (Post 11033286)
here first in the world sm-g900i direct emmc :D
http://i61.tinypic.com/153pdme.png

How you could find out the pinout when nearly all necessary pins are broken and removed? Br

raevillena 05-13-2015 02:42

sir is there avalable for zenfone 5 a501cg?


All times are GMT +1. The time now is 02:31.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.13650 seconds with 6 queries

SEO by vBSEO