eMMC Direct Pinout Collection. \m/ - Page 2 - GSM-Forum

unlock in nepal · 11-19-2013, 05:05

I9070 support or not by Direct eMMC

I want to pin out my mobile not connect in Medusa

& Riff may phone taking current in dcpower supply

0.09 when i prase on of boad is untouch & frase

NoName® · 11-19-2013, 11:04

Quote:

Originally Posted by unlock in nepal

I9070 support or not by Direct eMMC

I want to pin out my mobile not connect in Medusa

& Riff may phone taking current in dcpower supply

0.09 when i prase on of boad is untouch & frase

Yes it supported , even if JTAG wont connect.

unlock in nepal · 11-19-2013, 17:36

Thanks To NoName Sir If posable to so emc pinout pliz so me

I oder my box reasive in 1 wink pliz so me emc pinout

arthur1964 · 11-21-2013, 21:51

Hi all!!
Can someone give me pinouts for galaxy s3 i9300?
Thanks.

MasterDuke · 11-21-2013, 23:55

Code:

Successefuly connected to box on COM13
Box S/N: xxxxxxxxxxxxxxxx, ,FW Ver.: 01.47
Loading eMMC Addon Firmware...
CMD Pullup Level:1742 mV
CMD Active Level:1866 mV
EMMC CID 1501004D4247344741002507630E2133
EMMC CSD D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufactorer ID: 15
EMMC OEM ID: 0100
EMMC Date: 02/1998 FW rev.0x0 HW rev.0x0
EMMC Serial #: 621241102
EMMC NAME: MBG4GA
EMMC Capacity: 29820 MB (High Density Card)
=============================================
Extended CSD rev 1.6 (MMC 4.5)
=============================================
Card Supported Command sets [S_CMD_SET: 0x01]
HPI Features [HPI_FEATURE: 0x01]: 
implementation based on CMD13
Background operations support [BKOPS_SUPPORT: 0x01]
Max Packet Read Cmd [MAX_PACKED_READS: 0x3f]
Max Packet Write Cmd [MAX_PACKED_WRITES: 0x3f]
Data TAG support [DATA_TAG_SUPPORT: 0x01]
Data TAG Unit Size [TAG_UNIT_SIZE: 0x04]
Tag Resources Size [TAG_RES_SIZE: 0x00]
Context Management Capabilities [CONTEXT_CAPABILITIES: 0x05]
Large Unit Size [LARGE_UNIT_SIZE_M1: 0x07]
Extended partition attribute support [EXT_SUPPORT: 0x03]
Generic CMD6 Timer [GENERIC_CMD6_TIME: 0x0a]
Power off notification [POWER_OFF_LONG_TIME: 0x3c]
Cache Size [CACHE_SIZE] is 65536 KiB
Background operations status [BKOPS_STATUS: 0x00]
TRIM Multiplier [TRIM_MULT: 0x02]
Secure Feature support [SEC_FEATURE_SUPPORT: 0x55]
Boot Information [BOOT_INFO: 0x07]
Device supports alternative boot method
Device supports dual data rate during boot
Device supports high speed timing during boot
Boot partition size [BOOT_SIZE_MULTI: 0x10]
Access size [ACC_SIZE: 0x07]
High-capacity erase unit size [HC_ERASE_GRP_SIZE: 0x01]
High-capacity erase timeout [ERASE_TIMEOUT_MULT: 0x01]
Reliable write sector count [REL_WR_SEC_C: 0x01]
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x10]
Sleep current (VCC) [S_C_VCC: 0x07]
Sleep current (VCCQ) [S_C_VCCQ: 0x07]
Sleep/awake timeout [S_A_TIMEOUT: 0x11]
Sector Count [SEC_COUNT: 0x03a3e000]
Partition switching timing [PARTITION_SWITCH_TIME: 0x01]
Out-of-interrupt busy timing [OUT_OF_INTERRUPT_TIME: 0x02]
I/O Driver Strength [DRIVER_STRENGTH: 0x0f]
Card Type [CARD_TYPE: 0x17]
CSD structure version [CSD_STRUCTURE: 0x02]
Command set [CMD_SET: 0x00]
Command set revision [CMD_SET_REV: 0x00]
Power class [POWER_CLASS: 0x00]
High-speed interface timing [HS_TIMING: 0x00]
Erased memory content [ERASED_MEM_CONT: 0x00]
Boot configuration bytes [PARTITION_CONFIG: 0x00]
Not boot enable
No access to boot partition
Boot config protection [BOOT_CONFIG_PROT: 0x00]
Boot bus Conditions [BOOT_BUS_CONDITIONS: 0x00]
High-density erase group definition [ERASE_GROUP_DEF: 0x00]
=============================================
Boot write protection status registers [BOOT_WP_STATUS]: 0x00
Boot Area Write protection [BOOT_WP]: 0x00
Power ReadOnly locking: possible
Permanent ReadOnly locking: possible
Read Only lock status: not locked
=============================================
User area write protection register [USER_WP]: 0x00
FW configuration [FW_CONFIG]: 0x00
RPMB Size [RPMB_SIZE_MULT]: 0x01
Write reliability setting register [WR_REL_SET]: 0x1f
Write reliability parameter register [WR_REL_PARAM]: 0x04
Enable background operations handshake [BKOPS_EN]: 0x01
H/W reset function [RST_N_FUNCTION]: 0x01
HPI management [HPI_MGMT]: 0x00
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Max Enhanced Area Size [MAX_ENH_SIZE_MULT]: 0x000747
Partitions attribute [PARTITIONS_ATTRIBUTE]: 0x00
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
General Purpose Partition Size
[GP_SIZE_MULT_4]: 0x000000
[GP_SIZE_MULT_3]: 0x000000
[GP_SIZE_MULT_2]: 0x000000
[GP_SIZE_MULT_1]: 0x000000
Enhanced User Data Area Size [ENH_SIZE_MULT]: 0x000000
Enhanced User Data Start Address [ENH_START_ADDR]: 0x000000
Bad Block Management mode [SEC_BAD_BLK_MGMNT]: 0x00
Periodic Wake-up [PERIODIC_WAKEUP]: 0x00
Program CID/CSD in DDR mode support [PROGRAM_CID_CSD_DDR_SUPPORT]: 0x01
Native sector size [NATIVE_SECTOR_SIZE]: 0x00
Sector size emulation [USE_NATIVE_SECTOR]: 0x00
Sector size [DATA_SECTOR_SIZE]: 0x00
1st initialization after disabling sector size emulation [INI_TIMEOUT_EMU]: 0x00
Class 6 commands control [CLASS_6_CTRL]: 0x00
Number of addressed group to be Released[DYNCAP_NEEDED]: 0x00
Exception events control [EXCEPTION_EVENTS_CTRL]: 0x0000
Exception events status[EXCEPTION_EVENTS_STATUS]: 0x0000
Extended Partitions Attribute [EXT_PARTITIONS_ATTRIBUTE]: 0x0000
Packed command status [PACKED_COMMAND_STATUS]: 0x00
Packed command failure index [PACKED_FAILURE_INDEX]: 0x00
Power Off Notification [POWER_OFF_NOTIFICATION]: 0x00
Control to turn the Cache ON/OFF [CACHE_CTRL]: 0x00

CELLMANIAC · 11-23-2013, 05:52

how about Gt-i9180 pin out direct?

mikele09 · 11-24-2013, 11:44

Please gt i8150 pin out direct!
thank's

satglitch · 11-24-2013, 15:51

plz. need I977 emmc pinout

mr.omphonx · 11-24-2013, 17:54

I9100,N7000 and htc evo 3D cdma PG86100 emmc pinout pleasee

fr3nsis · 12-09-2013, 13:29

can i have i9100 pinout?
my easy jtag is on the way and in themaintime i would to solder wires
thanks

satglitch · 12-11-2013, 01:19

jtag pin are broken thank you

KE6SOLTI · 12-19-2013, 11:39

very good thread, must be sticky

bajoe_85 · 12-30-2013, 17:49

need pinouts i9100 ..

Jacques2 · 01-01-2014, 16:47

I am attempting to read the eMMC on the above listed phone. On my test phone I have identified 4 of the 5 connection locations. I have not been able to locate the CLK location on the phone PCB, other than on CPU pinout.

Any help would be appreciated!

Thanks
J2

ASTROCEL · 01-18-2014, 03:25

EMMC S6310 pin out please help me

11-19-2013, 05:05	#16 (permalink)
unlock in nepal No Life Poster Join Date: Nov 2011 Location: Student Posts: 1,224 Member: 1686564 Status: Offline Sonork: PM me Thanks Meter: 157	I9070 Direct eMMC pinout I9070 support or not by Direct eMMC I want to pin out my mobile not connect in Medusa & Riff may phone taking current in dcpower supply 0.09 when i prase on of boad is untouch & frase

11-19-2013, 17:36	#18 (permalink)
unlock in nepal No Life Poster Join Date: Nov 2011 Location: Student Posts: 1,224 Member: 1686564 Status: Offline Sonork: PM me Thanks Meter: 157	Thanks To NoName Sir Thanks To NoName Sir If posable to so emc pinout pliz so me I oder my box reasive in 1 wink pliz so me emc pinout

11-21-2013, 21:51	#19 (permalink)
arthur1964 Freak Poster Join Date: Feb 2008 Location: Spain Posts: 113 Member: 702604 Status: Offline Thanks Meter: 12	emmc pinout for s3 i9300 Hi all!! Can someone give me pinouts for galaxy s3 i9300? Thanks.

12-11-2013, 01:19	#26 (permalink)
satglitch Freak Poster Join Date: Jun 2012 Location: Canada Posts: 238 Member: 1773784 Status: Offline Thanks Meter: 27	help I977 emmc pinout jtag jtag pin are broken thank you

01-01-2014, 16:47	#29 (permalink)
Jacques2 Insane Poster Join Date: May 2012 Location: USA Posts: 66 Member: 1754897 Status: Offline Sonork: 100.1622738 Thanks Meter: 5	Motorola A956 eMMC CLK Location I am attempting to read the eMMC on the above listed phone. On my test phone I have identified 4 of the 5 connection locations. I have not been able to locate the CLK location on the phone PCB, other than on CPU pinout. Any help would be appreciated! Thanks J2

11-23-2013, 05:52	#21 (permalink)
CELLMANIAC Freak Poster Join Date: Dec 2006 Location: caribe look, Drunken master II Posts: 176 Member: 410843 Status: Offline Thanks Meter: 28	how about Gt-i9180 pin out direct?

11-24-2013, 11:44	#22 (permalink)
mikele09 Crazy Poster Join Date: Apr 2011 Posts: 51 Member: 1561698 Status: Offline Thanks Meter: 3	Please gt i8150 pin out direct! thank's

11-24-2013, 15:51	#23 (permalink)
satglitch Freak Poster Join Date: Jun 2012 Location: Canada Posts: 238 Member: 1773784 Status: Offline Thanks Meter: 27	plz. need I977 emmc pinout

11-24-2013, 17:54	#24 (permalink)
mr.omphonx No Life Poster Join Date: Feb 2008 Location: KABUPATEN SLEMAN Posts: 2,238 Member: 714648 Status: Offline Sonork: 1609640 Thanks Meter: 932	I9100,N7000 and htc evo 3D cdma PG86100 emmc pinout pleasee

12-09-2013, 13:29	#25 (permalink)
fr3nsis No Life Poster Join Date: Oct 2005 Location: Rome , Italy Posts: 1,530 Member: 190882 Status: Offline Sonork: BB PIN: 7C83D9CE Thanks Meter: 1,282	can i have i9100 pinout? my easy jtag is on the way and in themaintime i would to solder wires thanks

12-19-2013, 11:39	#27 (permalink)
KE6SOLTI No Life Poster Join Date: Mar 2013 Location: Nepal Age: 42 Posts: 728 Member: 1906979 Status: Offline Sonork: 100.1681049 Thanks Meter: 162	very good thread, must be sticky

12-30-2013, 17:49	#28 (permalink)
bajoe_85 Junior Member Join Date: Nov 2007 Location: indonesia Posts: 29 Member: 628250 Status: Offline Sonork: 100.1646879 Thanks Meter: 3	need pinouts i9100 ..

01-18-2014, 03:25	#30 (permalink)
ASTROCEL Junior Member Join Date: Feb 2013 Posts: 3 Member: 1890630 Status: Offline Sonork: 1223 Thanks Meter: 2	EMMC S6310 pin out please help me

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode