GSMSERVER GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Easy-Jtag

Reply
 
LinkBack Thread Tools Display Modes
Old 09-07-2018, 09:21   #1 (permalink)
Freak Poster
 
Join Date: Jul 2014
Posts: 292
Member: 2228162
Status: Offline
Sonork: 23243564rtrwe
Thanks Meter: 30
error: -8, DATA SND CRC


Setting frequence to 14 Mhz
CMD Pullup Level: 2970 mV
CMD Active Level: 3258 mV
EMMC Device Information :
EMMC CID: 15010056545530304DF1378A7A946F2A
EMMC CSD: D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacture Name: SAMSUNG , EMMC NAME: VTU00M , EMMC NAME (HEX): 56545530304D , S/N: 378A7A94 , rev. 0xF1
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 0 KB (000000000000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 0 KB (000000000000)
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Backup saved: VTU00M_378A7A94_20180907_111756.extcsd
EMMC Init completed.

Setting frequence to 14 Mhz
CMD Pullup Level: 2970 mV
CMD Active Level: 3269 mV
EMMC Device Information :
EMMC CID: 15010056545530304DF1378A7A946F2A
EMMC CSD: D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacture Name: SAMSUNG , EMMC NAME: VTU00M , EMMC NAME (HEX): 56545530304D , S/N: 378A7A94 , rev. 0xF1
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 0 KB (000000000000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 0 KB (000000000000)
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Backup saved: VTU00M_378A7A94_20180907_111814.extcsd
EMMC Init completed.

Operation: Write Dump

Writing to: ROM1 , start: 0x000000000000 , size: 0x000020000000
Input file:
eMMC switching to ROM1
Writing partition...
Error writing at address: 000000000000 , error: -8, DATA SND CRC Error ... Retry #1
Error writing at address: 000000000000 , error: -8, DATA SND CRC Error ... Retry #2
Error writing at address: 000000000000 , error: -8, DATA SND CRC Error ... Retry #3
Too many errors. Writing has been stopped


tried another version of jtag tool tried speeds tried other emmc's(samsung and non samsung) tried another dupms it's the same ....i did the proces many times with succed but now it's always shows this error
  Reply With Quote
Old 09-07-2018, 09:27   #2 (permalink)
Product Supporter
 
Join Date: Jun 2002
Location: Belarus
Age: 43
Posts: 2,024
Member: 13148
Status: Offline
Thanks Meter: 1,674
Quote:
Originally Posted by newbeez1 View Post

EMMC Manufacture Name: SAMSUNG , EMMC NAME: VTU00M , EMMC NAME (HEX): 56545530304D , S/N: 378A7A94 , rev. 0xF1


Operation: Write Dump

Writing to: ROM1 , start: 0x000000000000 , size: 0x000020000000
Input file:
eMMC switching to ROM1
Writing partition...
Error writing at address: 000000000000 , error: -8, DATA SND CRC Error ... Retry #1
Error writing at address: 000000000000 , error: -8, DATA SND CRC Error ... Retry #2
Error writing at address: 000000000000 , error: -8, DATA SND CRC Error ... Retry #3
Too many errors. Writing has been stopped


tried another version of jtag tool tried speeds tried other emmc's(samsung and non samsung) tried another dupms it's the same ....i did the proces many times with succed but now it's always shows this error
you update eMMC firmware
0xF1 firmware is very bad
  Reply With Quote
Old 09-07-2018, 09:32   #3 (permalink)
Freak Poster
 
Join Date: Jul 2014
Posts: 292
Member: 2228162
Status: Offline
Sonork: 23243564rtrwe
Thanks Meter: 30
Setting frequence to 14 Mhz
CMD Pullup Level: 2980 mV
CMD Active Level: 3279 mV
EMMC Device Information :
EMMC CID: 45010053454D30384790098B2D00B0BA
EMMC CSD: D00F00320F5903FFFFFFFFFF92404010
EMMC Manufacture Name: SANDISK , EMMC NAME: SEM08G , EMMC NAME (HEX): 53454D303847 , S/N: 098B2D00 , rev. 0x90
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000)
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Supported partition features [PARTITIONING_SUPPORT]: 0x03
Backup saved: SEM08G_098B2D00_20180907_113043.extcsd
EMMC Init completed.

Operation: Write Dump

The size has been corrected for the file size

Writing to: ROM1 , start: 0x000000000000 , size: 0x000020000000
Input file
Writing partition...
Error writing at address: 000000000000 , error: -8, DATA SND CRC Error ... Retry #1
Error writing at address: 000000000000 , error: -8, DATA SND CRC Error ... Retry #2
Error writing at address: 000000000000 , error: -8, DATA SND CRC Error ... Retry #3
Too many errors. Writing has been stopped
what about this
i tried many emmc's

Setting frequence to 14 Mhz
CMD Pullup Level: 2990 mV
CMD Active Level: 3269 mV
EMMC Device Information :
EMMC CID: 15010056545530304DF74C5726292148
EMMC CSD: D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacture Name: SAMSUNG , EMMC NAME: VTU00M , EMMC NAME (HEX): 56545530304D , S/N: 4C572629 , rev. 0xF7
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000)
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Backup saved: VTU00M_4C572629_20180907_113930.extcsd
EMMC Init completed.

Operation: Write Dump

The size has been corrected for the file size

Writing to: ROM1 , start: 0x000000000000 , size: 0x000020000000
Input file:
Writing partition...
Error writing at address: 000000000000 , error: -8, DATA SND CRC Error ... Retry #1
Error writing at address: 000000000000 , error: -8, DATA SND CRC Error ... Retry #2
Error writing at address: 000000000000 , error: -8, DATA SND CRC Error ... Retry #3
Too many errors. Writing has been stopped

Last edited by layder; 09-07-2018 at 10:42. Reason: merge posts
  Reply With Quote
Old 09-07-2018, 10:41   #4 (permalink)
Product Supporter
 
Join Date: Jun 2002
Location: Belarus
Age: 43
Posts: 2,024
Member: 13148
Status: Offline
Thanks Meter: 1,674
Quote:
Originally Posted by newbeez1 View Post
Setting frequence to 14 Mhz
CMD Pullup Level: 2980 mV
CMD Active Level: 3279 mV
EMMC Device Information :
EMMC CID: 45010053454D30384790098B2D00B0BA
EMMC CSD: D00F00320F5903FFFFFFFFFF92404010
EMMC Manufacture Name: SANDISK , EMMC NAME: SEM08G , EMMC NAME (HEX): 53454D303847 , S/N: 098B2D00 , rev. 0x90
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000)
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Supported partition features [PARTITIONING_SUPPORT]: 0x03
Backup saved: SEM08G_098B2D00_20180907_113043.extcsd
EMMC Init completed.

Operation: Write Dump

The size has been corrected for the file size

Writing to: ROM1 , start: 0x000000000000 , size: 0x000020000000
Input file
Writing partition...
Error writing at address: 000000000000 , error: -8, DATA SND CRC Error ... Retry #1
Error writing at address: 000000000000 , error: -8, DATA SND CRC Error ... Retry #2
Error writing at address: 000000000000 , error: -8, DATA SND CRC Error ... Retry #3
Too many errors. Writing has been stopped
what about this
i tried many emmc's
Check connection, voltage.
You connect eMMC at socket or ISP?
  Reply With Quote
Old 09-07-2018, 11:52   #5 (permalink)
Freak Poster
 
Join Date: Jul 2014
Posts: 292
Member: 2228162
Status: Offline
Sonork: 23243564rtrwe
Thanks Meter: 30
i am using e-mate -------------------
  Reply With Quote
Old 09-07-2018, 13:12   #6 (permalink)
Product Supporter
 
Join Date: Jun 2002
Location: Belarus
Age: 43
Posts: 2,024
Member: 13148
Status: Offline
Thanks Meter: 1,674
Quote:
Originally Posted by newbeez1 View Post
i am using e-mate -------------------
check connection of lines, check voltage of adapter, check if socket clear, try to you another adapter.
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 05:59.



Powered by Searchlight © 2020 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.23195 seconds with 7 queries

SEO by vBSEO