GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Easy-Jtag (https://forum.gsmhosting.com/vbb/f672/)
-   -   FAQ, manuals, videomanuals,howto - HERE: (https://forum.gsmhosting.com/vbb/f672/faq-manuals-videomanuals-howto-here-1649551/)

alkhaleejmobile 03-01-2014 13:09

plz upload any video,,to back up dump file,,read full dump from i9070

and write to an other ,,,how to

bijaylama 05-29-2014 12:15

plz upload more video
 
emmc how to repair for easy jtag

and more video upload plzzzzzzzz easy jtag Team

subeesh.cp 05-30-2014 09:46

Dear team,

how to repair dead boot in GT-I9505

Now the phone not detected by odin

in device manager which shows Qualcomm HS-USB QDLoader 9008 how to solve this

Jabbacks 08-05-2014 02:38

Does Easy-Jtag compatible with Dolphin Clip for Nokia Lumia's?

axl3888 08-05-2014 06:57

yes plz upload any video,,to back up dump file,,read full dump from i9070

and write to an other ,,,how to

alkhaleejmobile 08-11-2014 21:35

plz upload any samsung ,read full dump and write full dump,,
plz explain,,about adreses,which adress sellect in read full dump

viewprofile 10-27-2014 03:04

1 Attachment(s)
This is my firstime using Easy JTAG but dont know step by step... here what already i did
to Samsung S5570

1. solder cable to pcb
2. connect phone to jtag port

but when i pres repair it show message done with error. what i messed up? did i need to connect power to phone using PS (power amplifier) or just connect usb to boot?

what is RESET pin at PCB?

Please help

viewprofile 10-27-2014 03:22

Quote:

Originally Posted by viewprofile (Post 10639266)
This is my firstime using Easy JTAG but dont know step by step... here what already i did
to Samsung S5570

1. solder cable to pcb
2. connect phone to jtag port

but when i pres repair it show message done with error. what i messed up? did i need to connect power to phone using PS (power amplifier) or just connect usb to boot?

what is RESET pin at PCB?

Please help

After i connect USB dan battery to phone
Code:

For support and updates visit http://easy-jtag.com
Check security...OK
Initialising: SAMSUNG GT-S5570 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: 0FFFCxxxxxxxxxxxxx ,FW Ver.: 01.50
Connecting to Target...
JTAG device: MSM7227
CPU IDCODE : 0x203C10E1 Mfg.: 0x070, Part: 0x03c1, Ver.: 0x2
CPU Manufacturer: QUALCOMM , CPU Name: MSM7227T
Halting CPU...
Target not halted ;-(


nandkishorgupta 11-29-2014 07:03

Hello sir iam facing problem whenever i tryied to flash zte s183 always giving error riff shows 8mb flash file but can't flash blinking mobile & z3x jtag shows 16mb & gives error
log is here

EasyJtag Suite ver.: 1.6.3.0 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).

For support and updates visit EasyJtag ? most powerfull eMMC and JTAG tool on market. - EMMC BOX, JTAG BOX ,Z3X , BOOT REPAIR , FORENSICS TOOL
Check security...OK
Initialising: ZTE S168 Config ver.:1.00
I/O Level set to : 2200 mV
Box S/N: XXXXXXXXXXXXX ,FW Ver.: 01.50
Connecting to Target...
JTAG device: QSC1110
CPU IDCODE : 0x122C80E1 Mfg.: 0x070, Part: 0x22c8, Ver.: 0x1
CPU Manufacturer: QUALCOMM , CPU Name: QSC1110 Rev 1.0
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting NOR memory parameters of bank (0) ...
NOR FlashID:0001:007E 'S29NS128J 16MB (Spansion)' found
Writing memory from file...G:\EASY Jtag\Files\ZTE\S183\ZTE_S183_dump_rom1_16mb.bin
embeddedice handshake timeout
Timeout Error while reading approx : 0x00000100 bytes over DCC
Unknown DCC answer /PROTOCOL/
dcc_fastnor_write_pages error (PACKET_ADRESS:00010000,PACKET_LENGTH:00008000,MAX _DCC_BUFFER_LENGTH:00010c00,f:00) happened...
Failed writing file G:/EASY Jtag/Files/ZTE/S183/ZTE_S183_dump_rom1_16mb.bin to NOR flash 0 at offset 0x00010000

nandkishorgupta 11-29-2014 07:26

Problem solved MTS zte s183 8mb flashed sucessfully with Easy Jtag
here is log

Check security...OK
Initialising: Generic QSC1100 Config ver.:1.00
I/O Level set to : 2600 mV
Box S/N: XXXXXXXXXXXXXXXXXXXX ,FW Ver.: 01.50
Connecting to Target...
JTAG device: QSC1100
CPU IDCODE : 0x122C80E1 Mfg.: 0x070, Part: 0x22c8, Ver.: 0x1
CPU Manufacturer: QUALCOMM , CPU Name: QSC1110 Rev 1.0
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting NOR memory parameters of bank (0) ...
NOR FlashID:0001:007E 'S29NS128J 16MB (Spansion)' found
Checking NAND Image : D:\RIFF BOX\RIFF BOX\FLASH FILE\ZTE\S183 C132\ZTE S183_B03_May16 2013.bin
File successefuly loaded!
Writing memory from file...D:\RIFF BOX\RIFF BOX\FLASH FILE\ZTE\S183 C132\ZTE S183_B03_May16 2013.bin
NOR Write OK! Elpsed time: 704.703125s (11.625 KiB/s)

t.c.malethia 05-19-2015 12:29

zte s183 not connected with z3x jtag ,
target not halted problem


Initialising: ZTE S168 Config ver.:1.00
I/O Level set to : 2200 mV
Box S/N: 14005009B43886A3 ,FW Ver.: 01.52
Connecting to Target...
JTAG device: QSC1110
CPU IDCODE : 0x122C80E1 Mfg.: 0x070, Part: 0x22c8, Ver.: 0x1
CPU Manufacturer: QUALCOMM , CPU Name: QSC1110 Rev 1.0
Halting CPU...
Target not halted ;-(

masik71 09-24-2015 19:48

Spd Service Tool V1.0.0.1646

chmsc_ELX 07-06-2017 07:33

GT-S8150 jtag tesed pinout?

shahzad25125 08-06-2017 18:00

jtag box smart card driver not installing mr blang

LaySengDara 10-10-2017 09:39

Z3x Samsung & LG Newbie How To Use
 
Hi,
I am new to this forum, please guide me. I just purchase a Z3x box pro using LG and Samsung 29.4. I would like to learn how to used those box for FRP, unlock and do other things, right now I am clueless. I have computer repair experiences and work on hardware repair, phone and tablet. thanks in advance for helping... a


All times are GMT +1. The time now is 19:05.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -

Page generated in 0.29109 seconds with 5 queries

SEO by vBSEO