GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Easy-Jtag / Easy-Jtag Plus
Reload this Page GT-i9300 NO PRODUCT - successfully repair with easy jtag - Step by step inside
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source Mark Forums Read


Easy-Jtag / Easy-Jtag Plus The official support section. You can ask here your question and get answer regarding using Easy-Jtag / Easy-Jtag Plus.

Reply
Page 1 of 10 1 234 Last »
 
LinkBack Thread Tools Display Modes
Old 02-04-2014, 21:31   #1 (permalink)
No Life Poster
 
drjaved_akhter's Avatar
 
Join Date: Sep 2007
Location: PAKISTAN
Posts: 1,130
Member: 585807
Status: Offline
Thanks Meter: 781
GT-i9300 NO PRODUCT - successfully repair with easy jtag - Step by step inside

samsung gt-i9300 no product hang on logo repair


logs

Loading eMMC Addon Firmware...
CMD Pullup Level:1237 mV
CMD Active Level:1722 mV
EMMC CID 15010056545530304DF1F5C216FF6F5F

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 06/2012 FW rev.0xf1
EMMC NAME: <b>VTU00M</b> , S/N: 4123137791
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_4123137791_20140102_1034.extcsd
Done.
Running:SAMSUNG: Smart Factory Reset + Format...
<br>Successfully connected to box on COM4<b>
Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1258 mV
CMD Active Level:1722 mV
EMMC CID 15010056545530304DF1F5C216FF6F5F

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 06/2012 FW rev.0xf1
EMMC NAME: <b>VTU00M</b> , S/N: 4123137791
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_4123137791_20140102_1035.extcsd
Sending Smart Wipe Request...
Wiping Card... Please do not touch it!!!
Done.
<font color="red">Please don't forget to repair extCSD from backup!!!</font>
Running:SAMSUNG: MoviNAND Format...
<br>Successfully connected to box on COM4<b>
Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1258 mV
CMD Active Level:1711 mV
EMMC CID 15010056545530304DF1F5C216FF6F5F

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 06/2012 FW rev.0xf1
EMMC NAME: <b>VTU00M</b> , S/N: 4123137791
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_4123137791_20140102_1035.extcsd
Sending Internal Reconfiguration Request...
Waiting configuration Apply!!!
Restoring configuration...
EMMC ROM2/3 (Boot Partitions) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Wiping Card... Please do not touch it!!!
Done.
<font color="red">Please don't forget to repair extCSD from backup!!!</font>
Running:Repair extCSD...
<br>Successfully connected to box on COM4<b>
Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1237 mV
CMD Active Level:1701 mV
EMMC CID 15010056545530304DF1F5C216FF6F5F

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 06/2012 FW rev.0xf1
EMMC NAME: <b>VTU00M</b> , S/N: 4123137791
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Writing...
eMMC ACK Error !!!
eMMC ACK Error !!!
eMMC ACK Error !!!
Done!
<br>Successfully connected to box on COM4<b>
Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1227 mV
CMD Active Level:1701 mV
EMMC CID 15010056545530304DF1F5C216FF6F5F

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 06/2012 FW rev.0xf1
EMMC NAME: <b>VTU00M</b> , S/N: 4123137791
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Writing 000000200000 bytes to 00000000 ...ROM2
Write Speed: 222 kB/s
Done !!!
<br>Successfully connected to box on COM4<b>
Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1227 mV
CMD Active Level:1732 mV
EMMC CID 15010056545530304DF1F5C216FF6F5F

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 06/2012 FW rev.0xf1
EMMC NAME: <b>VTU00M</b> , S/N: 4123137791
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Writing 000020000000 bytes to 00000000 ...ROM1
Write Speed: 222 kB/s
Done !!!
  Reply With Quote
The Following 17 Users Say Thank You to drjaved_akhter For This Useful Post:
Show/Hide list of the thanked
Old 02-04-2014, 22:20   #2 (permalink)
No Life Poster
 
ahmed nokia's Avatar
 
Join Date: Jun 2004
Age: 44
Posts: 503
Member: 70206
Status: Offline
Sonork: 100.1616268
Thanks Meter: 27
pls add setup by setup if you can


thanks for help
  Reply With Quote
The Following User Says Thank You to ahmed nokia For This Useful Post:
Old 02-05-2014, 07:31   #3 (permalink)
No Life Poster
 
Join Date: Jun 2008
Location: Bahawal Nagar
Posts: 649
Member: 793565
Status: Offline
Sonork: 100.1611436
Thanks Meter: 356
Donate money to this user
Also Post image of all done storry instead of log
  Reply With Quote
The Following User Says Thank You to gulzarjan For This Useful Post:
Old 02-05-2014, 09:36   #4 (permalink)
No Life Poster
 
drjaved_akhter's Avatar
 
Join Date: Sep 2007
Location: PAKISTAN
Posts: 1,130
Member: 585807
Status: Offline
Thanks Meter: 781
Quote:
Originally Posted by ahmed nokia View Post
pls add setup by setup if you can


thanks for help
  Reply With Quote
The Following 34 Users Say Thank You to drjaved_akhter For This Useful Post:
Show/Hide list of the thanked
Old 02-08-2014, 10:27   #5 (permalink)
Freak Poster
 
Join Date: Aug 2013
Location: Kepler22
Age: 46
Posts: 105
Member: 2014892
Status: Offline
Sonork: 100.1646397
Thanks Meter: 5
can you share the extcsd file? i couldnt find it anywhere.
  Reply With Quote
Old 02-08-2014, 10:40   #6 (permalink)
Freak Poster
 
Join Date: Aug 2013
Location: Kepler22
Age: 46
Posts: 105
Member: 2014892
Status: Offline
Sonork: 100.1646397
Thanks Meter: 5
aha i found it now in backups folder.
  Reply With Quote
Old 02-08-2014, 11:06   #7 (permalink)
Freak Poster
 
Join Date: Aug 2006
Location: kanpur
Posts: 272
Member: 330372
Status: Offline
Thanks Meter: 26
Donate money to this user
really nice sir result of hard work
but i fail to do every time weather its for wright rom 1 or rom2

i thing i am not able to connect phone properly

i read lots mostly written connect properly

please upload screen shot of your connected pcs with wire if possible it will help me lot

thank you
  Reply With Quote
Old 02-08-2014, 16:55   #8 (permalink)
No Life Poster
 
drjaved_akhter's Avatar
 
Join Date: Sep 2007
Location: PAKISTAN
Posts: 1,130
Member: 585807
Status: Offline
Thanks Meter: 781
Quote:
Originally Posted by kripalu View Post
really nice sir result of hard work
but i fail to do every time weather its for wright rom 1 or rom2

i thing i am not able to connect phone properly

i read lots mostly written connect properly

please upload screen shot of your connected pcs with wire if possible it will help me lot

thank you

bro z3x support pinout see and enjoy great team z3x hard working result
good luck
  Reply With Quote
Old 02-08-2014, 18:54   #9 (permalink)
No Life Poster
 
dannyogolo's Avatar
 
Join Date: Nov 2002
Posts: 2,980
Member: 18200
Status: Offline
Sonork: 100.1608286
Thanks Meter: 82
beautiful.
Step 6 & 7 missing.
Pls upload picture for 6 and 7.
Thanks
  Reply With Quote
Old 02-08-2014, 20:44   #10 (permalink)
No Life Poster
 
drjaved_akhter's Avatar
 
Join Date: Sep 2007
Location: PAKISTAN
Posts: 1,130
Member: 585807
Status: Offline
Thanks Meter: 781
one more no product ok
THANKS Z3X TEAM.................
LOGS


Loading eMMC Addon Firmware...
<font color="red">Warning: CMD Pullup Level (1185 mV) too low , check cables etc.!!!</font>
CMD Active Level:1691 mV
EMMC CID 15010056545530304DF7C0335C77CF0B

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 12/2012 FW rev.0xf7
EMMC NAME: <b>VTU00M</b> , S/N: 3224591479
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_3224591479_20140003_0628.extcsd
Done.
<br>Successfully connected to box on COM4<b>
Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
<font color="red">Warning: CMD Pullup Level (1196 mV) too low , check cables etc.!!!</font>
CMD Active Level:1701 mV
EMMC CID 15010056545530304DF7C0335C77CF0B

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 12/2012 FW rev.0xf7
EMMC NAME: <b>VTU00M</b> , S/N: 3224591479
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_3224591479_20140003_0629.extcsd
Done.
<br>Successfully connected to box on COM4<b>
Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
<font color="red">Warning: CMD Pullup Level (1196 mV) too low , check cables etc.!!!</font>
CMD Active Level:1701 mV
EMMC CID 15010056545530304DF7C0335C77CF0B

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 12/2012 FW rev.0xf7
EMMC NAME: <b>VTU00M</b> , S/N: 3224591479
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_3224591479_20140003_0629.extcsd
Done.
<br>Successfully connected to box on COM4<b>
Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1206 mV
CMD Active Level:1711 mV
EMMC CID 15010056545530304DF7C0335C77CF0B

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 12/2012 FW rev.0xf7
EMMC NAME: <b>VTU00M</b> , S/N: 3224591479
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Writing 000000200000 bytes to 00000000 ...ROM2
Write Speed: 116 kB/s
Done !!!
Running:SAMSUNG: BOOT and RPMB resize...
<br>Successfully connected to box on COM4<b>
Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1216 mV
CMD Active Level:1670 mV
EMMC CID 15010056545530304DF7C0335C77CF0B

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 12/2012 FW rev.0xf7
EMMC NAME: <b>VTU00M</b> , S/N: 3224591479
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_3224591479_20140003_0630.extcsd
Sending Internal Reconfiguration Request for BOOT ...
Waiting for configuration Apply!!!
Sending Internal Reconfiguration Request for RPMB ...
BOOT1 and BOOT2 Size Set to : 0 KB
RPMB Size Set to : 0 KB
Waiting for configuration Apply!!!
Done.
<font color="red">Please don't forget to repair extCSD from backup!!!</font>
<br>Successfully connected to box on COM4<b>
Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1206 mV
CMD Active Level:1711 mV
EMMC CID 15010056545530304DF7C0335C77CF0B

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 12/2012 FW rev.0xf7
EMMC NAME: <b>VTU00M</b> , S/N: 3224591479
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 0 kB
EMMC ROM3 (Boot Partition 2) Capacity: 0 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 0 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_3224591479_20140003_0634.extcsd
Done.
Running:SAMSUNG: BOOT and RPMB resize...
<br>Successfully connected to box on COM4<b>
Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1206 mV
CMD Active Level:1701 mV
EMMC CID 15010056545530304DF7C0335C77CF0B

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 12/2012 FW rev.0xf7
EMMC NAME: <b>VTU00M</b> , S/N: 3224591479
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 0 kB
EMMC ROM3 (Boot Partition 2) Capacity: 0 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 0 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_3224591479_20140003_0634.extcsd
Sending Internal Reconfiguration Request for BOOT ...
Waiting for configuration Apply!!!
Sending Internal Reconfiguration Request for RPMB ...
BOOT1 and BOOT2 Size Set to : 2048 KB
RPMB Size Set to : 0 KB
Waiting for configuration Apply!!!
Done.
<font color="red">Please don't forget to repair extCSD from backup!!!</font>
<br>Successfully connected to box on COM4<b>
Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
<font color="red">Warning: CMD Pullup Level (1185 mV) too low , check cables etc.!!!</font>
CMD Active Level:1701 mV
EMMC CID 15010056545530304DF7C0335C77CF0B

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 12/2012 FW rev.0xf7
EMMC NAME: <b>VTU00M</b> , S/N: 3224591479
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 0 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_3224591479_20140003_0657.extcsd
Done.
<br>Successfully connected to box on COM4<b>
Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1216 mV
CMD Active Level:1711 mV
EMMC CID 15010056545530304DF7C0335C77CF0B

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 12/2012 FW rev.0xf7
EMMC NAME: <b>VTU00M</b> , S/N: 3224591479
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 0 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Writing 000000200000 bytes to 00000000 ...ROM2
Write Speed: 117 kB/s
Done !!!
  Reply With Quote
The Following 5 Users Say Thank You to drjaved_akhter For This Useful Post:
Show/Hide list of the thanked
Old 02-09-2014, 05:25   #11 (permalink)
Moderator
 
...:::::NP™:::::...'s Avatar
 
Join Date: Nov 2009
Location: €urope
Age: 41
Posts: 11,036
Member: 1162626
Status: Offline
Sonork: 100.1591727 QQ:2337938173
Thanks Meter: 11,108
I Think Need This Thread With Sticky List For Easy Jtag User Who Have Don't Knowledge About eMMC Flashing




Keep it Up



Best Regard





Bro:- Palash Ahammad
  Reply With Quote
The Following 5 Users Say Thank You to ...:::::NP™:::::... For This Useful Post:
Show/Hide list of the thanked
Old 02-09-2014, 06:37   #12 (permalink)
No Life Poster
 
jakkarzoya_2511's Avatar
 
Join Date: Oct 2007
Location: IN MOBILES
Posts: 1,199
Member: 613242
Status: Offline
Sonork: 100.1626311
Thanks Meter: 645
Donate money to this user
Arrow thx
salam bro
n
thx drjaved

its work with direct usb or test point plz reply me i wanna buy this product so need little help
  Reply With Quote
Old 02-09-2014, 09:57   #13 (permalink)
Product Manager
 
blang's Avatar
 
Join Date: Oct 2000
Location: future
Posts: 22,431
Member: 2368
Status: Offline
Sonork: 100.111111
Thanks Meter: 186,551
Donate money to this user
Quote:
Originally Posted by jakkarzoya_2511 View Post
salam bro
n
thx drjaved

its work with direct usb or test point plz reply me i wanna buy this product so need little help
This work via direct EMMC connection: How connect - >HERE<
  Reply With Quote
The Following User Says Thank You to blang For This Useful Post:
Old 02-09-2014, 10:13   #14 (permalink)
No Life Poster
 
Join Date: Jan 2006
Location: algeria
Posts: 1,476
Member: 217891
Status: Offline
Thanks Meter: 237
this problem slove 100%?? Be i think this problem HW
  Reply With Quote
Old 02-09-2014, 10:25   #15 (permalink)
Product Manager
 
blang's Avatar
 
Join Date: Oct 2000
Location: future
Posts: 22,431
Member: 2368
Status: Offline
Sonork: 100.111111
Thanks Meter: 186,551
Donate money to this user
Quote:
Originally Posted by moh_boulk17 View Post
this problem slove 100%?? Be i think this problem HW
not understand what you want to say?

nobody can't give you 100%.
  Reply With Quote
The Following User Says Thank You to blang For This Useful Post:
Reply
Page 1 of 10 1 234 Last »

Bookmarks

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 



All times are GMT +1. The time now is 02:04.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.25713 seconds with 9 queries

SEO by vBSEO