GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Easy-Jtag / Easy-Jtag Plus
Reload this Page GT-i9300 NO PRODUCT - successfully repair with easy jtag - Step by step inside
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source Mark Forums Read


Easy-Jtag / Easy-Jtag Plus The official support section. You can ask here your question and get answer regarding using Easy-Jtag / Easy-Jtag Plus.

Reply
Page 4 of 10 123 4 567 Last »
 
LinkBack Thread Tools Display Modes
Old 02-13-2014, 18:38   #46 (permalink)
Junior Member
 
Join Date: Dec 2007
Posts: 2
Member: 647430
Status: Offline
Thanks Meter: 2

emmc name 000000. cant repair?????????
  Reply With Quote
The Following User Says Thank You to tstcom For This Useful Post:
Old 02-14-2014, 19:33   #47 (permalink)
Freak Poster
 
Join Date: Apr 2005
Location: iran.ahwaz
Age: 41
Posts: 207
Member: 133927
Status: Offline
Thanks Meter: 20
emmc name 000000. cant repair?????????
  Reply With Quote
Old 02-15-2014, 10:59   #48 (permalink)
Junior Member
 
Join Date: Feb 2010
Posts: 30
Member: 1233181
Status: Offline
Thanks Meter: 1
Quote:
Originally Posted by drjaved_akhter View Post
i use two power supply external
are you use emmc adapter

two power supply?
  Reply With Quote
Old 02-15-2014, 16:50   #49 (permalink)
No Life Poster
 
drjaved_akhter's Avatar
 
Join Date: Sep 2007
Location: PAKISTAN
Posts: 1,130
Member: 585807
Status: Offline
Thanks Meter: 781
Quote:
Originally Posted by malikasim78 View Post
are you use emmc adapter

two power supply?
no i use tow power supply ...................
  Reply With Quote
Old 02-17-2014, 14:51   #50 (permalink)
Moderator
 
chand_gee's Avatar
 
Join Date: Jan 2008
Location: <jeddah al saudia>
Age: 36
Posts: 2,261
Member: 668050
Status: Offline
Sonork: 100.1656307
Thanks Meter: 991
Quote:
Originally Posted by blang View Post
for repair empty product code 1st. need try write rom2. product code there.
if after rom2 writing no any changes, then problem with emmc.
you can try Format emmc.
after format emmc goto factory status and need repair exscd.
after repair excsd need flash again rom1 and rom2.
and then flash via odin.

if something wrong while this steps - then unknown problem with emmc and cant be fixed.

From my test and report of users: 70% of problems with DIRECT EMMC read/write - long wires, GND wire bad, voltage not stable or not right, bad soldering. Remember connect direct emmc is more complicated than JTAG connect.
today i upgrade my phone with arabic firmware 4.3
and its show me prodect code=i9300
butt still showCUSTOM DOWNLAOD BINARY:2564566545.
i was dead repair it via clone sd
  Reply With Quote
Old 02-17-2014, 23:17   #51 (permalink)
Junior Member
 
Join Date: Feb 2010
Posts: 21
Member: 1228446
Status: Offline
Thanks Meter: 1
Can someone help me. I am new to easy jtag box. I have many galaxy i747 phones that turn on and off within 10 seconds. I cant even get phone into download mode and phone shuts off. is there anyway to repair these phones with z3x easy jtag. I have gpg easy jtag cables. I connect to easy repair and it does the whole process and when its says all done I try it and it does the same thing again. please help. I am new to this. any step by step would really help me a lot. thanks
  Reply With Quote
Old 02-18-2014, 01:12   #52 (permalink)
No Life Poster
 
Join Date: Feb 2003
Location: on the Moon ;)
Age: 47
Posts: 2,797
Member: 21937
Status: Offline
Thanks Meter: 279
Quote:
Originally Posted by therepaircenter View Post
Can someone help me. I am new to easy jtag box. I have many galaxy i747 phones that turn on and off within 10 seconds. I cant even get phone into download mode and phone shuts off. is there anyway to repair these phones with z3x easy jtag. I have gpg easy jtag cables. I connect to easy repair and it does the whole process and when its says all done I try it and it does the same thing again. please help. I am new to this. any step by step would really help me a lot. thanks
your problem may be something else .....

maybe only power switch ....
  Reply With Quote
Old 02-18-2014, 20:58   #53 (permalink)
Freak Poster
 
Join Date: Jan 2009
Location: MKD
Age: 40
Posts: 394
Member: 939467
Status: Offline
Thanks Meter: 50
any solution for this problem?
Quote:
Originally Posted by elfadelmed View Post
Loading eMMC Addon Firmware...
CMD Pullup Level:1443 mV
CMD Active Level:1773 mV
Can't Init EMMC !!! ( Ready Condition TIMEOUT! )
eMMC Card initialisation error!

Same error on several phones.
i have the same problem

any advice?

is it bad connection or what?
  Reply With Quote
Old 02-22-2014, 09:49   #54 (permalink)
No Life Poster
 
drjaved_akhter's Avatar
 
Join Date: Sep 2007
Location: PAKISTAN
Posts: 1,130
Member: 585807
Status: Offline
Thanks Meter: 781
one more repair


<br>Successfully connected to box on COM4<b>
Box S/N: *******************,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1258 mV
CMD Active Level:1711 mV
EMMC CID 15010056545530304DF1592E569B8F13

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 08/2012 FW rev.0xf1
EMMC NAME: <b>VTU00M</b> , S/N: 1496209051
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_1496209051_20140104_0817.extcsd
Done.
Running:SAMSUNG: Smart Factory Reset + Format...
<br>Successfully connected to box on COM4<b>
Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1247 mV
CMD Active Level:1701 mV
EMMC CID 15010056545530304DF1592E569B8F13

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 08/2012 FW rev.0xf1
EMMC NAME: <b>VTU00M</b> , S/N: 1496209051
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_1496209051_20140104_0817.extcsd
Sending Smart Wipe Request...
Wiping Card... Please do not touch it!!!
Done.
<font color="red">Please don't forget to repair extCSD from backup!!!</font>
Running:SAMSUNG: MoviNAND Format...
<br>Successfully connected to box on COM4<b>
Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1258 mV
CMD Active Level:1701 mV
EMMC CID 15010056545530304DF1592E569B8F13

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 08/2012 FW rev.0xf1
EMMC NAME: <b>VTU00M</b> , S/N: 1496209051
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_1496209051_20140104_0817.extcsd
Sending Internal Reconfiguration Request...
Waiting configuration Apply!!!
Restoring configuration...
EMMC ROM2/3 (Boot Partitions) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Wiping Card... Please do not touch it!!!
Done.
<font color="red">Please don't forget to repair extCSD from backup!!!</font>
Running:Repair extCSD...
<br>Successfully connected to box on COM4<b>
Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1237 mV
CMD Active Level:1701 mV
EMMC CID 15010056545530304DF1592E569B8F13

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 08/2012 FW rev.0xf1
EMMC NAME: <b>VTU00M</b> , S/N: 1496209051
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Writing...
eMMC ACK Error !!!
eMMC ACK Error !!!
eMMC ACK Error !!!
Done!
<br>Successfully connected to box on COM4<b>
Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1227 mV
CMD Active Level:1711 mV
EMMC CID 15010056545530304DF1592E569B8F13

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 08/2012 FW rev.0xf1
EMMC NAME: <b>VTU00M</b> , S/N: 1496209051
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Writing 000000200000 bytes to 00000000 ...ROM2
Write Speed: 222 kB/s
Done !!!
<br>Successfully connected to box on COM4<b>
Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1258 mV
CMD Active Level:1701 mV
EMMC CID 15010056545530304DF1592E569B8F13

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 08/2012 FW rev.0xf1
EMMC NAME: <b>VTU00M</b> , S/N: 1496209051
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Writing 000020000000 bytes to 00000000 ...ROM1
Write Speed: 222 kB/s
Done !!!
  Reply With Quote
Old 02-22-2014, 17:22   #55 (permalink)
Freak Poster
 
Join Date: Jun 2011
Location: Dominican Republic
Posts: 219
Member: 1607116
Status: Offline
Sonork: 100.1617729
Thanks Meter: 52
Donate money to this user
Quote:
Originally Posted by drjaved_akhter View Post
samsung gt-i9300 no product hang on logo repair


logs

Loading eMMC Addon Firmware...
CMD Pullup Level:1237 mV
CMD Active Level:1722 mV
EMMC CID 15010056545530304DF1F5C216FF6F5F

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 06/2012 FW rev.0xf1
EMMC NAME: <b>VTU00M</b> , S/N: 4123137791
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_4123137791_20140102_1034.extcsd
Done.
Running:SAMSUNG: Smart Factory Reset + Format...
<br>Successfully connected to box on COM4<b>
Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1258 mV
CMD Active Level:1722 mV
EMMC CID 15010056545530304DF1F5C216FF6F5F

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 06/2012 FW rev.0xf1
EMMC NAME: <b>VTU00M</b> , S/N: 4123137791
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_4123137791_20140102_1035.extcsd
Sending Smart Wipe Request...
Wiping Card... Please do not touch it!!!
Done.
<font color="red">Please don't forget to repair extCSD from backup!!!</font>
Running:SAMSUNG: MoviNAND Format...
<br>Successfully connected to box on COM4<b>
Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1258 mV
CMD Active Level:1711 mV
EMMC CID 15010056545530304DF1F5C216FF6F5F

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 06/2012 FW rev.0xf1
EMMC NAME: <b>VTU00M</b> , S/N: 4123137791
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_4123137791_20140102_1035.extcsd
Sending Internal Reconfiguration Request...
Waiting configuration Apply!!!
Restoring configuration...
EMMC ROM2/3 (Boot Partitions) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Wiping Card... Please do not touch it!!!
Done.
<font color="red">Please don't forget to repair extCSD from backup!!!</font>
Running:Repair extCSD...
<br>Successfully connected to box on COM4<b>
Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1237 mV
CMD Active Level:1701 mV
EMMC CID 15010056545530304DF1F5C216FF6F5F

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 06/2012 FW rev.0xf1
EMMC NAME: <b>VTU00M</b> , S/N: 4123137791
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Writing...
eMMC ACK Error !!!
eMMC ACK Error !!!
eMMC ACK Error !!!
Done!
<br>Successfully connected to box on COM4<b>
Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1227 mV
CMD Active Level:1701 mV
EMMC CID 15010056545530304DF1F5C216FF6F5F

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 06/2012 FW rev.0xf1
EMMC NAME: <b>VTU00M</b> , S/N: 4123137791
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Writing 000000200000 bytes to 00000000 ...ROM2
Write Speed: 222 kB/s
Done !!!
<br>Successfully connected to box on COM4<b>
Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1227 mV
CMD Active Level:1732 mV
EMMC CID 15010056545530304DF1F5C216FF6F5F

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 06/2012 FW rev.0xf1
EMMC NAME: <b>VTU00M</b> , S/N: 4123137791
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Writing 000020000000 bytes to 00000000 ...ROM1
Write Speed: 222 kB/s
Done !!!

brother did everything letter and ends all good, but when assembled the phone and I put the battery does not turn on or enter download mode,
even a kind i9300 disarmament and works to make a backup of BOOT, and select read eMMC Card and now no power on
  Reply With Quote
Old 02-23-2014, 03:30   #56 (permalink)
Freak Poster
 
Join Date: Jun 2012
Location: kumasi
Posts: 151
Member: 1769339
Status: Offline
Sonork: 100.1627057
Thanks Meter: 13
Quote:
Originally Posted by TRABEL View Post
your problem may be something else .....

maybe only power switch ....
yes power switch stuck, just change the power switch problem solve
  Reply With Quote
Old 02-23-2014, 03:35   #57 (permalink)
Freak Poster
 
Join Date: Jun 2012
Location: kumasi
Posts: 151
Member: 1769339
Status: Offline
Sonork: 100.1627057
Thanks Meter: 13
Quote:
Originally Posted by chand_gee View Post
today i upgrade my phone with arabic firmware 4.3
and its show me prodect code=i9300
butt still showCUSTOM DOWNLAOD BINARY:2564566545.
i was dead repair it via clone sd
you have to reset custom binary count to:no

if not your device will behave strange
  Reply With Quote
Old 02-26-2014, 16:48   #58 (permalink)
No Life Poster
 
unlock in nepal's Avatar
 
Join Date: Nov 2011
Location: Student
Posts: 1,225
Member: 1686564
Status: Offline
Sonork: PM me
Thanks Meter: 157
? about erase emmc
erase emmc option daed my phone
  Reply With Quote
Old 03-03-2014, 16:26   #59 (permalink)
Freak Poster
 
janzir's Avatar
 
Join Date: Feb 2012
Location: Lebanon
Posts: 209
Member: 1726910
Status: Offline
Sonork: 100.1623945
Thanks Meter: 41
hi
i have problem with my gt-i9300 which has no product code
i followed ur method, but i couldn't do " novinand format" ,, result emmc ask error!!
i also get these values even if i write rom1 & rom2 images (from shell):

EMMC ROM1 (Main User Data) Capacity: 16384 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 512 kB
EMMC ROM3 (Boot Partition 2) Capacity: 512 kB


is my EMMC diffected, or am i doing something wrong?


thanks
  Reply With Quote
Old 03-10-2014, 07:39   #60 (permalink)
No Life Poster
 
mscomp's Avatar
 
Join Date: Apr 2006
Location: Oued zenati Algeria
Age: 44
Posts: 1,215
Member: 266158
Status: Offline
Sonork: 131654654654
Thanks Meter: 198
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 0 kB
EMMC ROM3 (Boot Partition 2) Capacity: 0 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 0 kB
Extended pleaz help i cant partition always 0 ko
  Reply With Quote
Reply
Page 4 of 10 123 4 567 Last »

Bookmarks

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 



All times are GMT +1. The time now is 17:57.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.29567 seconds with 9 queries

SEO by vBSEO