GSMSERVER GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Easy-Jtag

Reply
 
LinkBack Thread Tools Display Modes
Old 01-15-2015, 18:57   #121 (permalink)
Junior Member
 
Join Date: Dec 2014
Posts: 7
Member: 2304720
Status: Offline
Thanks Meter: 2

Pls upload step by step picture for it is in i9003 dead boot repair.
  Reply With Quote
Old 02-21-2015, 09:55   #122 (permalink)
Junior Member
 
Join Date: Feb 2015
Posts: 1
Member: 2350353
Status: Offline
Thanks Meter: 0
hii every1...i hv sam s3 hang on logo...its showing custom binary counts;YES (12744875645) plzz help....
  Reply With Quote
Old 02-21-2015, 11:34   #123 (permalink)
Product Supporter
 
allumts's Avatar
 
Join Date: Apr 2011
Age: 54
Posts: 15,639
Member: 1564612
Status: Online
Thanks Meter: 11,557
Donate money to this user
Quote:
Originally Posted by smart_prash007 View Post
Pls upload step by step picture for it is in i9003 dead boot repair.
you are in wrong thread, use search button and find for I9003 that is all another thingh from I9300.
  Reply With Quote
The Following User Says Thank You to allumts For This Useful Post:
Old 02-25-2015, 14:54   #124 (permalink)
Freak Poster
 
Join Date: Nov 2013
Location: Venezuela-Falcon
Posts: 335
Member: 2074524
Status: Offline
Sonork: 100.1627435
Thanks Meter: 108
Z3X EasyJtag Software ver. 1.7.0.1
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 07FFB005A703FA68, ,FW Ver.: 01.51
CMD Pullup Level:1227 mV
CMD Active Level:1629 mV
eMMC Device Information
EMMC CID : 15010056545530304DF18D2613C57F0A
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 07/2012 Rev.0xf1
EMMC NAME: VTU00M , S/N: 2368082885
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_2368082885_20150103_1013.extcsd
Done.
Running:SAMSUNG: MoviNAND Factory Reset...
Skip loading eMMC Addon Firmware
CMD Pullup Level:1227 mV
CMD Active Level:1629 mV
Sending Smart Wipe Request...
Wiping Card... Please do not touch it!!!
Done.
Please don't forget to repair extCSD from backup!!!
Running:SAMSUNG: MoviNAND Reset + Format...

Z3X EasyJtag Software ver. 1.7.0.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:1227 mV
CMD Active Level:1629 mV
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Sending Internal Reconfiguration Request...
Waiting configuration Apply!!!
Restoring configuration...
EMMC ROM2/3 (Boot Partitions) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Wiping Card... Please do not touch it!!!
Done.
Please don't forget to repair extCSD from backup!!!
extCSD file...C:\Archivos de programa\Z3X\EASYJTAG\Backups\VTU00M_2368082885_20 150103_1013.extcsd
Running:Repair extCSD...

Z3X EasyJtag Software ver. 1.7.0.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:1227 mV
CMD Active Level:1629 mV
Writing...
Done!
Done.
Please don't forget to repair extCSD from backup!!!
You must select flash file first!
Checking NAND Image : E:\Celulares\Box & Dongles\Easy Jtag\Repairs\Samsung\I9300\EMMC_ROM2_00000000_0020 0000.bin
File successefuly loaded!
Processing file...E:\Celulares\Box & Dongles\Easy Jtag\Repairs\Samsung\I9300\EMMC_ROM2_00000000_0020 0000.bin

Z3X EasyJtag Software ver. 1.7.0.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:1227 mV
CMD Active Level:1629 mV
Input file : E:\Celulares\Box & Dongles\Easy Jtag\Repairs\Samsung\I9300\EMMC_ROM2_00000000_0020 0000.bin
Writing 0000200000 bytes to 00000000 ...ROM2 (BOOT1 ROM)
Done. Write Speed: 843 kB/s
Checking NAND Image : E:\Celulares\Box & Dongles\Easy Jtag\Repairs\Samsung\I9300\EMMC_ROM1_00000000_2000 0000.bin
File successefuly loaded!
Processing file...E:\Celulares\Box & Dongles\Easy Jtag\Repairs\Samsung\I9300\EMMC_ROM1_00000000_2000 0000.bin

Z3X EasyJtag Software ver. 1.7.0.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:1227 mV
CMD Active Level:1629 mV
Input file : E:\Celulares\Box & Dongles\Easy Jtag\Repairs\Samsung\I9300\EMMC_ROM1_00000000_2000 0000.bin
Writing 0020000000 bytes to 00000000 ...ROM1 (USER ROM)
Done. Write Speed: 2592 kB/s
  Reply With Quote
Old 02-25-2015, 17:15   #125 (permalink)
Freak Poster
 
Join Date: Nov 2013
Location: Venezuela-Falcon
Posts: 335
Member: 2074524
Status: Offline
Sonork: 100.1627435
Thanks Meter: 108
Thanks Z3x team and I managed to revive several dead
my question is ??

what is the best software to version or repaired after flash emmc?

since I have flashed with pit included and comprise! ..
but giving me some errors in closed process etc

what is the best software version or use ?? and after using Jtag Easy Z3x???
  Reply With Quote
Old 03-24-2015, 18:19   #126 (permalink)
No Life Poster
 
ak72342's Avatar
 
Join Date: Jul 2008
Location: ::::...I LOVE PAKISTAN...::::
Posts: 1,257
Member: 823250
Status: Offline
Sonork: 100.1587800
Thanks Meter: 187
THANX JAVED BROTHER...I HAVE DONE IT
BUT IT NOT GONA FLASH WITH ANY TOOL AND ODIN.....
Code:
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2012 Rev.0xF1
EMMC NAME: VTU00M , S/N: 3351519891
EMMC NAME (HEX): 56545530304D00 
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_3351519891_20150202_1644.extcsd
Done.

Running:SAMSUNG: MoviNAND Factory Reset...
Skip loading eMMC Addon Firmware
CMD Pullup Level:732 mV
CMD Active Level:1598 mV
Sending Smart Wipe Request...
Wiping Card... Please do not touch it!
Please don't forget to repair extCSD from backup!
Done.

Running:SAMSUNG: MoviNAND Reset + Format...
Z3X EasyJtag Software ver. 1.8.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:732 mV
CMD Active Level:1598 mV
EMMC ROM2/3 (Boot Partitions) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Sending Internal Reconfiguration Request...
Waiting configuration Apply!
Restoring configuration...
EMMC ROM2/3 (Boot Partitions) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Wiping Card... Please do not touch it!
Please don't forget to repair extCSD from backup!
Done.

extCSD file...C:\Users\AK'\Desktop\New folder\EMMC_00000000_00020000.bin
You must select a valid extCSD file first!
extCSD file...C:\Program Files\Z3X\EASYJTAG\Backups\VTU00M_3351519891_20150202_1644.extcsd
Running:Repair extCSD...
Z3X EasyJtag Software ver. 1.8.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:732 mV
CMD Active Level:1598 mV
Writing...
Done.

You must select flash file first!
Checking NAND Image : C:\Users\AK'\Desktop\New folder\EMMC_ROM2_00000000_00200000.bin
File successefuly loaded!
Processing file...C:\Users\AK'\Desktop\New folder\EMMC_ROM2_00000000_00200000.bin
Z3X EasyJtag Software ver. 1.8.1.1
Skip loading eMMC Addon Firmware
USB Open Failed, Reason: PORT Open Error 
Done.

Processing file...C:\Users\AK'\Desktop\New folder\EMMC_ROM2_00000000_00200000.bin
Z3X EasyJtag Software ver. 1.8.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:732 mV
CMD Active Level:1598 mV
Input file : C:\Users\AK'\Desktop\New folder\EMMC_ROM2_00000000_00200000.bin
Writing 0000200000 bytes to 00000000 ...ROM2 (BOOT1 ROM)
Done. Write Speed: 855 kB/s

Checking NAND Image : C:\Users\AK'\Desktop\New folder\EMMC_ROM1_00000000_20000000.bin
File successefuly loaded!
Processing file...C:\Users\AK'\Desktop\New folder\EMMC_ROM1_00000000_20000000.bin
Z3X EasyJtag Software ver. 1.8.1.1
Skip loading eMMC Addon Firmware
USB Open Failed, Reason: PORT Open Error 
Done.

Processing file...C:\Users\AK'\Desktop\New folder\EMMC_ROM1_00000000_20000000.bin
Z3X EasyJtag Software ver. 1.8.1.1
Skip loading eMMC Addon Firmware
USB Open Failed, Reason: PORT Open Error 
Done.

Processing file...C:\Users\AK'\Desktop\New folder\EMMC_ROM1_00000000_20000000.bin
Z3X EasyJtag Software ver. 1.8.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:732 mV
CMD Active Level:1598 mV
Input file : C:\Users\AK'\Desktop\New folder\EMMC_ROM1_00000000_20000000.bin
Writing 0020000000 bytes to 00000000 ...ROM1 (USER ROM)
Done. Write Speed: 2614 kB/s

Quote:
Originally Posted by drjaved_akhter View Post
yes and take customer brother
  Reply With Quote
Old 04-04-2015, 10:10   #127 (permalink)
Insane Poster
 
Join Date: Mar 2015
Location: pakistan
Posts: 90
Member: 2369915
Status: Offline
Sonork: 100.1655031
Thanks Meter: 8
HI i have i9505 when i conent with computer he take all driver butt when i connect download mood he never take any driver or not connect with computer plzz help what can i do ?????
  Reply With Quote
Old 04-04-2015, 11:28   #128 (permalink)
Product Supporter
 
allumts's Avatar
 
Join Date: Apr 2011
Age: 54
Posts: 15,639
Member: 1564612
Status: Online
Thanks Meter: 11,557
Donate money to this user
You are totally Of Topic, here is for Exsinos I9300 you are talking about a Qualcomm phone I9505...please use search button and not post anywhere....

BR
allumts
  Reply With Quote
Old 05-11-2015, 12:54   #129 (permalink)
No Life Poster
 
dharyadi's Avatar
 
Join Date: Oct 2006
Age: 41
Posts: 688
Member: 369678
Status: Offline
Thanks Meter: 192
my phone condition now, can enter download mode whithout product name,

try to connect with emmc connection

1.8v
Quote:
Z3X EasyJtag Software ver. 2.0.0.0
Loading eMMC Addon Firmware... IO: 1800 mV
Box S/N: 13FF800954CE828C, ,FW Ver.: 01.52
CMD Pullup Level:742 mV
CMD Active Level:2217 mV
Can't init device, Reason: CMD Timeout Error
Done.
2.8v
Quote:
Z3X EasyJtag Software ver. 2.0.0.0
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 13FF800954CE828C, ,FW Ver.: 01.52
CMD Pullup Level:711 mV
CMD Active Level:1526 mV
Can't init device, Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD]
Done.
3.3v

Quote:
Z3X EasyJtag Software ver. 2.0.0.0
Loading eMMC Addon Firmware... IO: 3300 mV
Box S/N: 13FF800954CE828C, ,FW Ver.: 01.52
CMD Pullup Level:752 mV
CMD Active Level:2217 mV
Can't init device, Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD]
Done.
emmc dead or problem connection ?
  Reply With Quote
The Following User Says Thank You to dharyadi For This Useful Post:
Old 05-11-2015, 16:57   #130 (permalink)
No Life Poster
 
dharyadi's Avatar
 
Join Date: Oct 2006
Age: 41
Posts: 688
Member: 369678
Status: Offline
Thanks Meter: 192
i am sure 2 vcc connection is good (2.8v )
  Reply With Quote
The Following User Says Thank You to dharyadi For This Useful Post:
Old 05-12-2015, 03:52   #131 (permalink)
Crazy Poster
 
Join Date: Apr 2010
Posts: 54
Member: 1279781
Status: Online
Thanks Meter: 37
amazing..................
  Reply With Quote
The Following User Says Thank You to alwi wafa For This Useful Post:
Old 05-13-2015, 15:07   #132 (permalink)
No Life Poster
 
drjaved_akhter's Avatar
 
Join Date: Sep 2007
Location: PAKISTAN
Posts: 1,030
Member: 585807
Status: Offline
Thanks Meter: 763
Quote:
Originally Posted by dharyadi View Post
my phone condition now, can enter download mode whithout product name,

try to connect with emmc connection

1.8v

2.8v

3.3v



emmc dead or problem connection ?
brother remove emmc and use tp and repair 0000 name ...............then solved your problem..............
  Reply With Quote
The Following User Says Thank You to drjaved_akhter For This Useful Post:
Old 08-02-2015, 03:23   #133 (permalink)
Junior Member
 
Join Date: Mar 2008
Age: 33
Posts: 19
Member: 734860
Status: Offline
Thanks Meter: 1
a great work my friend . thank you
  Reply With Quote
Old 08-02-2015, 03:24   #134 (permalink)
Junior Member
 
Join Date: Mar 2008
Age: 33
Posts: 19
Member: 734860
Status: Offline
Thanks Meter: 1
a great work my friend . thank you
  Reply With Quote
Old 08-02-2015, 09:57   #135 (permalink)
Junior Member
 
Join Date: Jul 2015
Posts: 1
Member: 2427525
Status: Offline
Thanks Meter: 0
When jtag needed to software i9300
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 14:51.



Powered by Searchlight © 2020 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.40253 seconds with 8 queries

SEO by vBSEO