E5663 sony m5 how to repair factory firmware

[thyagu2k]

e5663 sony m5 need factory repair

9/21/2018 10:29:07 PM>
9/21/2018 10:29:07 PM> Operation: Write by vendor (Sony)
9/21/2018 10:29:07 PM>
9/21/2018 10:29:07 PM> Creating GPT-partitioninig
9/21/2018 10:29:07 PM>
9/21/2018 10:29:07 PM> The addresses in the table are incorrect
9/21/2018 10:29:07 PM> For correcting addresses, do not forget to add the CDF to the "Firmware files"

regars

[layder]

Originally Posted by thyagu2k

e5663 sony m5 need factory repair

9/21/2018 10:29:07 PM>
9/21/2018 10:29:07 PM> Operation: Write by vendor (Sony)
9/21/2018 10:29:07 PM>
9/21/2018 10:29:07 PM> Creating GPT-partitioninig
9/21/2018 10:29:07 PM>
9/21/2018 10:29:07 PM> The addresses in the table are incorrect
9/21/2018 10:29:07 PM> For correcting addresses, do not forget to add the CDF to the "Firmware files"

regars

You need add CDF files

[thyagu2k]

Originally Posted by layder

You need add CDF files

where locate this file ? how to add this?

[layder]

Originally Posted by thyagu2k

where locate this file ? how to add this?

Add to file list like this:

[thyagu2k]

Originally Posted by layder

Add to file list like this:

i have only ftf file for e5663 u show like that file did'nt get with ftf file

where find this

thank us help me
regards

[thyagu2k]

Originally Posted by layder

Add to file list like this:

9/26/2018 9:23:37 AM> Looking for EasyJTAG box...
9/26/2018 9:23:37 AM> EasyJTAG API ver. 2100
9/26/2018 9:23:37 AM> Setting IO Levels to 3.3V
9/26/2018 9:23:37 AM> Setting frequence to 21 Mhz
9/26/2018 9:23:37 AM> EasyJTAG Box Serial = 0D0DFB16FBD6EE49
9/26/2018 9:23:37 AM> EasyJTAG Box Firmware = 1.63
9/26/2018 9:23:39 AM> Setting frequence to 21 Mhz
9/26/2018 9:23:39 AM> CMD Pullup Level: 2670 mV
9/26/2018 9:23:39 AM> CMD Active Level: 3227 mV
9/26/2018 9:23:39 AM> eMMC Init returned = 0
9/26/2018 9:23:39 AM> EMMC Device Information :
9/26/2018 9:23:39 AM> EMMC CID: 90014A4841473265050750B0BD3B339E
9/26/2018 9:23:39 AM> EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D2
9/26/2018 9:23:39 AM> EMMC Manufacture : SKHYNIX , EMMC NAME: HAG2e , HEX: 484147326500 , S/N: 50B0BD3B , rev. 0x07
9/26/2018 9:23:39 AM> EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 3/2016
9/26/2018 9:23:39 AM> EMMC ROM 1 (Main User Data) Capacity: 15032 MB (0003AB800000)
9/26/2018 9:23:39 AM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
9/26/2018 9:23:39 AM> EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
9/26/2018 9:23:39 AM> EMMC Permanent Write Protection: No
9/26/2018 9:23:39 AM> EMMC Temporary Write Protection: No
9/26/2018 9:23:39 AM> Extended CSD Information :
9/26/2018 9:23:39 AM> Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
9/26/2018 9:23:39 AM> Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
9/26/2018 9:23:39 AM> Boot Bus Config: 0x00 , width 1bit
9/26/2018 9:23:39 AM> H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
9/26/2018 9:23:39 AM> Supported partition features [PARTITIONING_SUPPORT]: 0x07
9/26/2018 9:23:39 AM> Device supports partitioning features
9/26/2018 9:23:39 AM> Device can have enhanced technological features in partitions and user data area
9/26/2018 9:23:39 AM> Device can have extended partitions attribute
9/26/2018 9:23:39 AM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
9/26/2018 9:23:39 AM> Backup saved: HAG2e_50B0BD3B_20180926_092339.extcsd
9/26/2018 9:23:39 AM> EMMC Init completed.
9/26/2018 9:23:39 AM>
9/26/2018 9:23:39 AM> Opening file: C:\Users\remnan744\Documents\.flashTool\sony-e5663\firmwares\E5663_30.1.B.1.55_R8A_Generic Indonesia_1297-3900.ftf
9/26/2018 9:23:39 AM>
9/26/2018 9:23:39 AM> preloader_s1sbl_PLATFORM-MT6795-LIVE-0353-OEM1-ROOT_S1-BOOT-LIVE-AC45-0004-MMC.sinb
9/26/2018 9:23:39 AM> Found 3 supported eMMC CID:
9/26/2018 9:23:39 AM> DRAM detected
9/26/2018 9:23:39 AM>
9/26/2018 9:23:39 AM> MTK
9/26/2018 9:23:39 AM> GPT
9/26/2018 9:23:39 AM>
9/26/2018 9:23:39 AM> The addresses in the table are incorrect
9/26/2018 9:23:39 AM> For correcting addresses, do not forget to add the CDF to the "Firmware files"
9/26/2018 9:23:39 AM>
9/26/2018 9:23:39 AM> The size of the last section has been updated
9/26/2018 9:24:45 AM> Selected file: C:\Users\remnan744\Documents\.flashTool\sony-e5663\firmwares\E5663_30.1.B.1.55_R8A_Generic Indonesia_1297-3900.ftf
9/26/2018 9:24:45 AM>
9/26/2018 9:24:45 AM> E5663_30.1.B.1.55_R8A_Generic Indonesia_1297-3900.ftf
9/26/2018 9:24:45 AM> The list of files in the firmware:
9/26/2018 9:24:45 AM> META-INF\MANIFEST.MF
9/26/2018 9:24:45 AM> loader.sin
9/26/2018 9:24:45 AM> default.fsc
9/26/2018 9:24:45 AM> apps_log.sin
9/26/2018 9:24:45 AM> boot.sin
9/26/2018 9:24:45 AM> boot_delivery.xml
9/26/2018 9:24:45 AM> boot\Holly_S1BootConfig_MiscTA.tab
9/26/2018 9:24:45 AM> boot\secro_S1-SW-TEST-B316-0001-MMC.sinb
9/26/2018 9:24:45 AM> boot\logo_S1-SW-TEST-B316-0001-MMC.sinb
9/26/2018 9:24:45 AM> boot\secro-sign-signed_S1-SW-LIVE-AC45-PID1-0005-MMC.sinb
9/26/2018 9:24:45 AM> boot\tee1_PLATFORM-MT6795-LIVE-0353-OEM1-TEEIMG_S1-SW-LIVE-AC45-PID1-0005-MMC.sinb
9/26/2018 9:24:45 AM> boot\tee2_S1-SW-TEST-B316-0001-MMC.sinb
9/26/2018 9:24:45 AM> boot\logo-sign-signed_S1-SW-LIVE-AC45-PID1-0005-MMC.sinb
9/26/2018 9:24:45 AM> boot\preloader_s1sbl_S1-BOOT-TEST-B316-0001-MMC.sinb
9/26/2018 9:24:45 AM> boot\tee2_PLATFORM-MT6795-LIVE-0353-OEM1-TEEIMG_S1-SW-LIVE-AC45-PID1-0005-MMC.sinb
9/26/2018 9:24:45 AM> boot\preloader_s1sbl_PLATFORM-MT6795-LIVE-0353-OEM1-ROOT_S1-BOOT-LIVE-AC45-0004-MMC.sinb
9/26/2018 9:24:45 AM> boot\lk_S1-BOOT-TEST-B316-0001-MMC.sinb
9/26/2018 9:24:45 AM> boot\lk-sign-signed_S1-BOOT-LIVE-AC45-0004-MMC.sinb
9/26/2018 9:24:45 AM> boot\tee1_S1-SW-TEST-B316-0001-MMC.sinb
9/26/2018 9:24:45 AM> cache.sin
9/26/2018 9:24:45 AM> cust-reset.ta
9/26/2018 9:24:45 AM> diag.sin
9/26/2018 9:24:45 AM> elabel.sin
9/26/2018 9:24:45 AM> fotakernel.sin
9/26/2018 9:24:45 AM> oem.sin
9/26/2018 9:24:45 AM> partitions.sin
9/26/2018 9:24:45 AM> simlock.ta
9/26/2018 9:24:45 AM> system.sin
9/26/2018 9:24:45 AM> userdata.sin
9/26/2018 9:24:45 AM>
9/26/2018 9:25:36 AM> Looking for EasyJTAG box...
9/26/2018 9:25:36 AM> EasyJTAG API ver. 2100
9/26/2018 9:25:36 AM> Setting IO Levels to 3.3V
9/26/2018 9:25:36 AM> Setting frequence to 21 Mhz
9/26/2018 9:25:36 AM> EasyJTAG Box Serial = 0D0DFB16FBD6EE49
9/26/2018 9:25:36 AM> EasyJTAG Box Firmware = 1.63
9/26/2018 9:25:37 AM> Setting frequence to 21 Mhz
9/26/2018 9:25:37 AM> CMD Pullup Level: 2670 mV
9/26/2018 9:25:37 AM> CMD Active Level: 3217 mV
9/26/2018 9:25:37 AM> eMMC Init returned = 0
9/26/2018 9:25:37 AM> EMMC Device Information :
9/26/2018 9:25:37 AM> EMMC CID: 90014A4841473265050750B0BD3B339E
9/26/2018 9:25:37 AM> EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D2
9/26/2018 9:25:37 AM> EMMC Manufacture : SKHYNIX , EMMC NAME: HAG2e , HEX: 484147326500 , S/N: 50B0BD3B , rev. 0x07
9/26/2018 9:25:37 AM> EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 3/2016
9/26/2018 9:25:37 AM> EMMC ROM 1 (Main User Data) Capacity: 15032 MB (0003AB800000)
9/26/2018 9:25:37 AM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
9/26/2018 9:25:37 AM> EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
9/26/2018 9:25:37 AM> EMMC Permanent Write Protection: No
9/26/2018 9:25:37 AM> EMMC Temporary Write Protection: No
9/26/2018 9:25:37 AM> Extended CSD Information :
9/26/2018 9:25:37 AM> Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
9/26/2018 9:25:37 AM> Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
9/26/2018 9:25:37 AM> Boot Bus Config: 0x00 , width 1bit
9/26/2018 9:25:37 AM> H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
9/26/2018 9:25:37 AM> Supported partition features [PARTITIONING_SUPPORT]: 0x07
9/26/2018 9:25:37 AM> Device supports partitioning features
9/26/2018 9:25:37 AM> Device can have enhanced technological features in partitions and user data area
9/26/2018 9:25:37 AM> Device can have extended partitions attribute
9/26/2018 9:25:37 AM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
9/26/2018 9:25:37 AM> Backup saved: HAG2e_50B0BD3B_20180926_092537.extcsd
9/26/2018 9:25:37 AM> EMMC Init completed.
9/26/2018 9:25:37 AM>
9/26/2018 9:25:37 AM> Operation: Write by vendor (Sony)
9/26/2018 9:25:37 AM>
9/26/2018 9:25:37 AM> Creating GPT-partitioninig
9/26/2018 9:25:37 AM>
9/26/2018 9:25:37 AM> The addresses in the table are incorrect
9/26/2018 9:25:37 AM> For correcting addresses, do not forget to add the CDF to the "Firmware files"

[layder]

Originally Posted by thyagu2k

i have only ftf file for e5663 u show like that file did'nt get with ftf file

where find this

thank us help me
regards

CDF files are included it Setool sin_set files

[thyagu2k]

Originally Posted by layder

CDF files are included it Setool sin_set files

this file use with ftf firimware? use included any firmware?(e5663?

[layder]

Originally Posted by thyagu2k

this file use with ftf firimware? use included any firmware?(e5663?

This file contants xml files with partition table sizes

[thyagu2k]

Originally Posted by layder

This file contants xml files with partition table sizes

when i open folder not show zip file only ftf file only

[layder]

Originally Posted by thyagu2k

when i open folder not show zip file only ftf file only

The program adds files or Setool, or native. If the ftf files do not contain partition info, then you need to use the Setool firmware.

[erenozdmrr]

Hello, How can I get the appropriate CDF file for my device? I need your help
Sony G3421