GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Easy-Jtag / Easy-Jtag Plus (https://forum.gsmhosting.com/vbb/f672/)
-   -   JTAG Finder guide in pictures : HAIER C200 (https://forum.gsmhosting.com/vbb/f672/jtag-finder-guide-pictures-haier-c200-1661635/)

FTONYI 11-02-2013 10:19

Function is very good, thank you for Z3X team!!

mobirepair 11-10-2013 07:35

Quote:

Originally Posted by viniicell (Post 9631037)
Hello,

the cable for Jtag header[ gpgcable=10pins] if you take out v+ and Gnd pins you are left with 8pins to work with for searching pinouts. Now my question is, in the above Haier c200 example you have numbered the pin pads on the phone board from 1 to 14 and they are all possible pinouts and we are having only 8pins from the header cable which if we solder there will be still six tp on pcb left empty which might be part of the correct pinouts. How do you solve that? how do you have all the tpoints wired if they are 14....12...0r 15 so you avoid pin search failed and many endless trials?

the header has 20 pins in total but you have numerous GND and NC its like you can not expand it to increase the number of pins for searching to atleast 12 or 18? or is it possible?

b.r viniicell

hi mate....i m also having same que..as u put out....bt i m waiting that have any jtag team admin time to answer u and me.......

Dr_Wolodya 12-03-2013 16:03

Jtag pin finder on Samsung i9000 (just for test):
Code:

Start Z3X Jtag Pin Finder...
Successfully connected to box on COM117
Waiting for box reset...
Box Working Mode: JTAG Pin Finder.
Start Z3X Jtag Pin Finder...
Stage 1: Search TCK / TMS / TDI / TDO...
Get IDCODE...
JTAG Pinout Found: TCK: Pin 9 / TMS: Pin 7 / TDI: Pin 5 / TDO: Pin 13
CPU IDCODE : 0x1BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x1
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A8
Stage 2: Search TRST...
TRST Pin Found: TRST: Pin 3
Box Working Mode: JTAG Box.


jeeqer 10-11-2014 22:06

STB JTAG pinout
 
Hi fellows, you guys made interesting thread there. I really need your help finding SRT4975A satellite dish receiver JTAG header. We have thousand of them with flash problem, they're sub-standard goods that our people can't resist buying.
Your help is more than welcome.
INFO
RECEIVER MODEL: SRT4975A
PROCESSOR: STI511-GUC

f0ou4d 11-15-2014 20:04

Please, may you help us with a another guide which you'll explain how to correctly dump the memory flash ! :)
I haven't understood who to chose the correct adress and the correct size !

Allanar 03-13-2015 15:22

Hi all, I have a Huawei Ascend Y330-U05; when I try to turn it shows me the logo of Huawei and 10 seconds the phone is restarted. I asked for help to restore the boot, but they told me they do not know how to get pinout, I attached pictures of the PCB from the front and behind. Thanks in advance.
View image: HWBSide PCBOff
View image: HWBSide Up

Dr_Wolodya 03-13-2015 20:09

Quote:

Originally Posted by Allanar (Post 10923016)
Hi all, I have a Huawei Ascend Y330-U05; when I try to turn it shows me the logo of Huawei and 10 seconds the phone is restarted. I asked for help to restore the boot, but they told me they do not know how to get pinout, I attached pictures of the PCB from the front and behind. Thanks in advance.
View image: HWBSide PCBOff
View image: HWBSide Up

Is it Qualcomm MSM8225 based phone or MTK 6572A?
If MSM8225 then check pins under sticker with IMEI.

Allanar 03-17-2015 19:13

Quote:

Originally Posted by Dr_Wolodya (Post 10923498)
Is it Qualcomm MSM8225 based phone or MTK 6572A?
If MSM8225 then check pins under sticker with IMEI.

It is a MTK6572 based phone

Dr_Wolodya 03-17-2015 19:32

Quote:

Originally Posted by Allanar (Post 10931419)
It is a MTK6572 based phone

MTK6572 can be flashed with standard micro usb cable.

Allanar 03-19-2015 15:33

Quote:

Originally Posted by Dr_Wolodya (Post 10931454)
MTK6572 can be flashed with standard micro usb cable.

As I can do? Sigma have tried and there is not yet an Medusa pinout. This is the situation that gave rise to the problem: the boot sector was flashed with MTKDroid for upgrading the OS Jelly Bean 4.2 to 4.4 ClockWorkMod KK, but what happened is that restarts once showing the logo of Huawei

Dr_Wolodya 03-19-2015 16:04

Try wipe from recovery.

Allanar 03-27-2015 16:36

I just need the pinout to write in the sector where the recovery is stored, because you have the phone is having a recovery from another phone model, in this case a recovery with CWM

Allanar 03-27-2015 17:02

I just need the pinout to write in the sector where the recovery is stored because the phone has a recovery from another phone model for which is not compatible, in this case a recovery with CWM. I need a way to restore with jtag start

allwin2abbas 03-28-2015 08:44

wow complete thread thanks

Allanar 05-12-2015 16:22

You can use the PC LTP to discover the pins on the board? If possible, there is any program that facilitates this task?


All times are GMT +1. The time now is 14:03.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.13925 seconds with 6 queries

SEO by vBSEO