GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Easy-Jtag / Easy-Jtag Plus (https://forum.gsmhosting.com/vbb/f672/)
-   -   Need Sony G3312 L1 Dead Boot Repair Pinouts (https://forum.gsmhosting.com/vbb/f672/need-sony-g3312-l1-dead-boot-repair-pinouts-2593161/)

::SYED MOBILE:: 04-23-2019 11:59

Need Sony G3312 L1 Dead Boot Repair Pinouts
 
Need Sony G3312 L1

Dead Boot Repair

Pinouts

laxmi kamlesh 04-23-2019 18:20

what is your device condition ?

if dead then remove emmc and find pinout or repair /write emmc via sony firmware .

::SYED MOBILE:: 04-23-2019 22:47

Quote:

Originally Posted by laxmi kamlesh (Post 13631236)
what is your device condition ?

if dead then remove emmc and find pinout or repair /write emmc via sony firmware .

Cell phone came with screen lock problem

Iam trying to flash with sony flash tool flashing start 2sec and stop after that cell gone sleep

When i put charger pin cell show just red light blinking

trying to again flash but flashing not start

When i put usb cable in device manager show unkown device

layder 04-24-2019 07:41

Quote:

Originally Posted by ::SYED MOBILE:: (Post 13631521)
Cell phone came with screen lock problem

Iam trying to flash with sony flash tool flashing start 2sec and stop after that cell gone sleep

When i put charger pin cell show just red light blinking

trying to again flash but flashing not start

When i put usb cable in device manager show unkown device

easy way - yon need setool software, install driver, ans flash it

::SYED MOBILE:: 04-24-2019 08:18

Quote:

Originally Posted by layder (Post 13631784)
easy way - yon need setool software, install driver, ans flash it

iam trying to flash with setool error

Code:

RUNNING v 1.1433/01.15/UNI
CARD SERIAL xxxxx
USBFLASH DRIVER VERSION 03.02.00.00
CFG:000000000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" OR "VOLUME DOWN" BUTTON ...
S1BOOT NOT DETECTED
FAILED TO SETUP PHONE
Elapsed: 5 seconds


malka4u 04-24-2019 08:27

g series cannot be repaired by setool according to the_laser

Code:

- added support for boot recovery of MT6582,MT6732,MT6735,MT6752,MT6755,MT6795-based phones
  this is all sony MTK-based models, except G-series

  instructions : 
  install latest usbflash drivers ( ggsetup-3.1.0.11.exe )
  select proper phone model, add to FW area required firmware, check signed mode + altbypass, press "flash"
  if phone has damaged boot, just connect phone and press "ready", setool2 will do all other job
  if phone has damaged security units or "stucked" boot ( no device appears, when phone connected to PC ) - you need to open phone,
  connect testpoint to GND, connect USB cable to PC, release testpoint and then press "ready"


::SYED MOBILE:: 04-24-2019 08:32

Quote:

Originally Posted by malka4u (Post 13631841)
g series cannot be repaired by setool according to the_laser

Code:

- added support for boot recovery of MT6582,MT6732,MT6735,MT6752,MT6755,MT6795-based phones
  this is all sony MTK-based models, except G-series

  instructions : 
  install latest usbflash drivers ( ggsetup-3.1.0.11.exe )
  select proper phone model, add to FW area required firmware, check signed mode + altbypass, press "flash"
  if phone has damaged boot, just connect phone and press "ready", setool2 will do all other job
  if phone has damaged security units or "stucked" boot ( no device appears, when phone connected to PC ) - you need to open phone,
  connect testpoint to GND, connect USB cable to PC, release testpoint and then press "ready"


thanks for your guide but i dont have test point


you can share test point picture plz

shoaibansari. 04-26-2019 11:00

Quote:

Originally Posted by ::SYED MOBILE:: (Post 13631851)
thanks for your guide but i dont have test point


you can share test point picture plz

this phone boot repair not supported in setool

yasir3 06-30-2020 13:43

it is supported with octoplus box medusa pro , can u share pinouts please

duffy1989 06-03-2022 15:59

Quote:

Originally Posted by yasir3 (Post 14130495)
it is supported with octoplus box medusa pro , can u share pinouts please



Do you find test point?

Shiv21889 06-09-2022 15:17

Sony D3312 flash after dead
 
Dear Team





help Sony D3312 flash after dead

::SYED MOBILE:: 06-13-2022 06:34

Quote:

Originally Posted by duffy1989 (Post 14564000)
Do you find test point?

its time to use Z3X Easy Jtag Plus Tool . With EMMC Socket

::SYED MOBILE:: 06-13-2022 06:34

Quote:

Originally Posted by Shiv21889 (Post 14566685)
Dear Team





help Sony D3312 flash after dead


its time to use Z3X Easy Jtag Plus Tool . With EMMC Socket


All times are GMT +1. The time now is 06:21.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.16750 seconds with 6 queries

SEO by vBSEO