GSM-Forum - With new update 3.4.01, NAND stopped working.

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Easy-Jtag / Easy-Jtag Plus (https://forum.gsmhosting.com/vbb/f672/)

- - With new update 3.4.01, NAND stopped working. (https://forum.gsmhosting.com/vbb/f672/new-update-3-4-01-nand-stopped-working-2541850/)

With new update 3.4.01, NAND stopped working.

With new update 3.4.01, NAND stopped working.
None of the NAND works.
http://forum.gsmhosting.com/vbb/moz-...0ea6/img/g.png http://forum.gsmhosting.com/vbb/moz-...6/img/yo32.png

Z3X EasyJtag Software ver. 3.4.0.1
Identify NAND Chip.
Simple command type
Id: 0x000000000000
Full page size: 0x0
Page data size: 0x0
Page spare size: 0x0
Layout:
number of CS: 0
number of LUNs per CS: 0
number of Planes per LUN: 0
number of Blocks per Plane: 0
number of Pages per Block: 0
Flash size: 0x0 / 0,000,000,000B / 0B
Can't init device, Reason: NAND chip not connected
Сделано.

Quote:

Originally Posted by 666SATAN666 (Post 13488986)

Серьезно чтоли? А у других почему то проблем нет. Покажите фото адаптера и нанд?

Code:

Z3X EasyJtag Software ver. 3.4.0.1

Identify NAND Chip.

It's PPN NAND

Id: 0x50504E010505

Extended id: 0x980001461902

apple bus capability: x32 x64 

Name: THGBX3G7D2KLF0C

Vendor: Toshiba

FW version: 080100P

Full page size: 0x4040

Page data size: 0x4040

Page spare size: 0x0

Layout:

 number of CS: 5

 number of LUNs per CS: 1

 number of Planes per LUN: 2

 number of Blocks per Plane: 1064

 number of Pages per Block: 256

 number of Pages per SLC Block: 128

Flash size: 0xA6E640000 / 41,742,256,000B / 41GB

Сделано.

i used adapter same you and all working ok

Quote:

Selected pinout: GEN2 ISP Pinout
Change EasyJTAG Pinout OK
Z3X EasyJtag Software ver. 3.4.0.1
Identify NAND Chip.
Simple command type
Id: 0xECDA109544EC
Name: K9F2G08U0A
Vendor: Samsung
Full page size: 0x840
Page data size: 0x800
Page spare size: 0x40
Layout:
number of CS: 1
number of LUNs per CS: 1
number of Planes per LUN: 2
number of Blocks per Plane: 1024
number of Pages per Block: 64
Flash size: 0x10800000 / 0,264,000,000B / 256MB
Done.

It seems that the firmware has partially died. Is it possible to reflash it before waiting for an update?

why do i read iconfig and replace nand hdd and record iconfig but information SN is different or null? z3x nand is bad

Z3X support, help me please!

The problem was solved by flashing boxing.

Z3X support, help me please too!
I bought a new nand adaptor, but never could use unfortunately.

Z3X EasyJtag Software ver. 3.6.1.2
Identify NAND Chip.
Simple command type
Id: 0x000000000000
Full page size: 0x0
Page data size: 0x0
Page spare size: 0x0
Layout:
number of CS: 0
number of LUNs per CS: 0
number of Planes per LUN: 0
number of Blocks per Plane: 0
number of Pages per Block: 0
Flash size: 0x0 / 0,000,000,000B / 0B
Can't init device, Reason: NAND chip not connected
Сделано.

What is the condition of your mobile phone ?

Mine Working Fine Too