| raisalina | 04-06-2019 14:54 |
Nokia 2 TA-1029 Emmc Dump Backup Success
Code:
Setting frequence to 21 Mhz
CMD Pullup Level: 2072 mV
CMD Active Level: 2619 mV
EMMC Device Information :
EMMC CID: 90014A483847346132A5189208BF840A
EMMC CSD: D02701328F5903FFFFFFFFE78A400016
EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4a2 , HEX: 483847346132 , S/N: 189208BF , rev. 0xA5
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 8/2017
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H8G4a2_189208BF_20190406_132019.extcsd
EMMC Init completed.
Get firmware version
Brand = Unknown
Manufacturer = FIH
Device = Unknown
Model = Unknown
Phone platform = msm8909
CPU Abi = armeabi-v7a
Android release = 7.1.1
Firmware version = 00WW_0_64A
Firmware date = Sun Jan 7 18:45:49 CST 2018
Setting frequence to 21 Mhz
CMD Pullup Level: 2062 mV
CMD Active Level: 2619 mV
EMMC Device Information :
EMMC CID: 90014A483847346132A5189208BF840A
EMMC CSD: D02701328F5903FFFFFFFFE78A400016
EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4a2 , HEX: 483847346132 , S/N: 189208BF , rev. 0xA5
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 8/2017
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H8G4a2_189208BF_20190406_132031.extcsd
EMMC Init completed.
Operation: Reading from eMMC...
Reading from: ROM1 , start: 0x000000000000 , size: 0x000020000000
Output file: C:\Users\Salina\Desktop\0\TA-1029\EMMC_H8G4a2_ROM1_000000000000_000020000000.bin
eMMC switching to ROM1
Reading partition...
Error reading at address: 000011400000 , error: -2, CMD CRC Error ... Retry #1
Done reading partition. Read speed: 946.74 Kb/s
All done time: [00:09:20:306]
Setting frequence to 21 Mhz
CMD Pullup Level: 2052 mV
CMD Active Level: 2619 mV
EMMC Device Information :
EMMC CID: 90014A483847346132A5189208BF840A
EMMC CSD: D02701328F5903FFFFFFFFE78A400016
EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4a2 , HEX: 483847346132 , S/N: 189208BF , rev. 0xA5
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 8/2017
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H8G4a2_189208BF_20190406_133007.extcsd
EMMC Init completed.
Operation: Reading from eMMC...
Reading from: ROM2 , start: 0x000000000000 , size: 0x000000400000
Output file: C:\Users\Salina\Desktop\0\TA-1029\EMMC_H8G4a2_ROM2_000000000000_000000400000.bin
eMMC switching to ROM2
Reading partition...
Done reading partition. Read speed: 532.68 Kb/s
All done time: [00:00:14:192]
Setting frequence to 21 Mhz
CMD Pullup Level: 2062 mV
CMD Active Level: 2619 mV
EMMC Device Information :
EMMC CID: 90014A483847346132A5189208BF840A
EMMC CSD: D02701328F5903FFFFFFFFE78A400016
EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4a2 , HEX: 483847346132 , S/N: 189208BF , rev. 0xA5
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 8/2017
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H8G4a2_189208BF_20190406_133033.extcsd
EMMC Init completed.
Operation: Reading from eMMC...
Reading from: ROM3 , start: 0x000000000000 , size: 0x000000400000
Output file: C:\Users\Salina\Desktop\0\TA-1029\EMMC_H8G4a2_ROM3_000000000000_000000400000.bin
eMMC switching to ROM3
Reading partition...
Done reading partition. Read speed: 532.81 Kb/s
All done time: [00:00:14:186]
|
