Note 10+ sm-n975f cannot programm - Page 2 - GSM-Forum

layder · 07-08-2020, 19:21

Quote:

Originally Posted by ktienda

eMMC_tool Suite ver. 1.6.2.0 (release date: 30.06.2019)
EasyJTAG Box Firmware = 2.52

Run old version EasyJTAG Classic software with Left Ctrl pressed to flash old box firmware

ktienda · 07-08-2020, 22:58

Quote:

Originally Posted by layder

run old version easyjtag classic software with left ctrl pressed to flash old box firmware

solved :

-tks

tintome · 07-15-2020, 14:52

Hallo
New user here. I just activated Easy Jtag Plus, I bought the lite version with the 5 adapters in the photo below

I need to flash N975f but I do not have the red ufs adapter, just the ones in the picture above that do not have the marking tx0p/ rx0p etc marking on them.
Any other way besides getting that adapter ?

tintome · 07-23-2020, 18:31

bump bump bump bump bump bump
bump
bump

layder · 07-24-2020, 10:31

Quote:

Originally Posted by tintome

Hallo

I need to flash N975f but I do not have the red ufs adapter, just the ones in the picture above that do not have the marking tx0p/ rx0p etc marking on them.
Any other way besides getting that adapter ?

You can't connect to ufs chips without socket adaptor
To work with UFS memoby you need buy additional adapters

tintome · 07-24-2020, 18:55

Is any of the red ones from below ok for this job?

layder · 07-25-2020, 00:34

Quote:

Originally Posted by tintome

Is any of the red ones from below ok for this job?

Moorc is selled box with new box

, new red box and 3 new eMMC ISP adapetet

For work wich UFS chips you need buy UFS chips afapters

ktienda · 08-01-2020, 05:02

https://gsmserver.es/z3x-easy-jtag-p...ocket-adapter/

.

isp work ok

tintome · 08-02-2020, 15:07

This guy uses another type of adapter, I just need this one :
https://*********/OFNe-kOWgOg?t=3

tintome · 08-04-2020, 15:58

Is there something like in this photo available ? Everywhere I ask, they don`t make them anymore.
I just need a test point solution .... I rather not desolder the memory.

tintome · 08-05-2020, 22:30

Would this be good for UFS isp work ?

tintome · 08-08-2020, 22:30

Really hoped Easy Jtag had better support
At least from other members ......
Need to use it on Note10+

UzjavaAzizbek · 08-09-2020, 06:48

Quote:

Originally Posted by tintome

Would this be good for UFS isp work ?

not !! this adapter for emmc

you need ufs adapter at the moment note 10 not solution for isp , only adapter can solve this problem

tintome · 08-09-2020, 13:57

how does this guy do it then?
www.shorturl.at/uvJR0
www. youtube .com /watch?v=OFNe-kOWgOg

tintome · 08-10-2020, 11:00

Also, there is ISP pin out and dump on support
Just need to know how to write it.

07-15-2020, 14:52	#18 (permalink)
tintome No Life Poster Join Date: Feb 2005 Location: Romania Age: 37 Posts: 2,255 Member: 120579 Status: Offline Thanks Meter: 182	Samsung Note 10+ N975F adapter for easy jtag Hallo New user here. I just activated Easy Jtag Plus, I bought the lite version with the 5 adapters in the photo below I need to flash N975f but I do not have the red ufs adapter, just the ones in the picture above that do not have the marking tx0p/ rx0p etc marking on them. Any other way besides getting that adapter ?

07-23-2020, 18:31	#19 (permalink)
tintome No Life Poster Join Date: Feb 2005 Location: Romania Age: 37 Posts: 2,255 Member: 120579 Status: Offline Thanks Meter: 182	bump bump bump bump bump bump bump bump

07-24-2020, 18:55	#21 (permalink)
tintome No Life Poster Join Date: Feb 2005 Location: Romania Age: 37 Posts: 2,255 Member: 120579 Status: Offline Thanks Meter: 182	Is any of the red ones from below ok for this job?

08-01-2020, 05:02	#23 (permalink)
ktienda Freak Poster Join Date: Jul 2006 Location: sprinfield usa. Age: 36 Posts: 460 Member: 309769 Status: Offline Thanks Meter: 50	https://gsmserver.es/z3x-easy-jtag-p...ocket-adapter/ . isp work ok

08-02-2020, 15:07	#24 (permalink)
tintome No Life Poster Join Date: Feb 2005 Location: Romania Age: 37 Posts: 2,255 Member: 120579 Status: Offline Thanks Meter: 182	This guy uses another type of adapter, I just need this one : https://*********/OFNe-kOWgOg?t=3

08-04-2020, 15:58	#25 (permalink)
tintome No Life Poster Join Date: Feb 2005 Location: Romania Age: 37 Posts: 2,255 Member: 120579 Status: Offline Thanks Meter: 182	Is there something like in this photo available ? Everywhere I ask, they don`t make them anymore. I just need a test point solution .... I rather not desolder the memory.

08-05-2020, 22:30	#26 (permalink)
tintome No Life Poster Join Date: Feb 2005 Location: Romania Age: 37 Posts: 2,255 Member: 120579 Status: Offline Thanks Meter: 182	Would this be good for UFS isp work ?

08-08-2020, 22:30	#27 (permalink)
tintome No Life Poster Join Date: Feb 2005 Location: Romania Age: 37 Posts: 2,255 Member: 120579 Status: Offline Thanks Meter: 182	Really hoped Easy Jtag had better support At least from other members ...... Need to use it on Note10+

08-09-2020, 13:57	#29 (permalink)
tintome No Life Poster Join Date: Feb 2005 Location: Romania Age: 37 Posts: 2,255 Member: 120579 Status: Offline Thanks Meter: 182	how does this guy do it then? www.shorturl.at/uvJR0 www. youtube .com /watch?v=OFNe-kOWgOg

08-10-2020, 11:00	#30 (permalink)
tintome No Life Poster Join Date: Feb 2005 Location: Romania Age: 37 Posts: 2,255 Member: 120579 Status: Offline Thanks Meter: 182	Also, there is ISP pin out and dump on support Just need to know how to write it.