Oppo A3s [CPH1803][EDL MODE][DEAD RECOVERED][DONE] by Easy JTAG_Palash Ahammad - Page 2 - GSM-Forum

**...:::::NP™:::::...** · 06-11-2020, 12:59

Hi,

High speed not sweet able or Per hubs for your required job.

You set the high speed mode For erasing purpose, just set the low frequency as per as my posting image 9Mhz Bus1Bit.

GSMSHOP1 · 06-14-2020, 14:53

hello

ihave oppo a3s problme the current image boot recovery have

if just flash recovery and boot with easy jtag i cant work to enter in recovery mode,????????????

layder · 06-15-2020, 00:35

Quote:

Originally Posted by GSMSHOP1

Hello Mr

any help for slove this problm im step by step if you possible

THANKS MAN

Operation: Erasing eMMC...

Erasing for: ROM1 , start: 0x000000000000 , size: 0x000000020000
eMMC switching to ROM1
Erasing partition...
Error erasing at address: 000000000000 , error: -1, CMD Timeout Error ... Retry #1
Error erasing at address: 000000000000 , error: -1, CMD Timeout Error ... Retry #2
Error erasing at address: 000000000000 , error: -1, CMD Timeout Error ... Retry #3
Too many errors. Erasing has been stopped

https://forum.gsmhosting.com/vbb/f67...ution-2585863/

zack winstone · 06-25-2020, 05:32

I can not see the rowprogram0 when i backup

solusi hp · 06-25-2020, 05:41

Quote:

Originally Posted by zack winstone

I can not see the rowprogram0 when i backup

no need rawprogramm0 for backup just backup necessary partition like post 1

sed_1982 · 07-14-2020, 06:39

Help
can't download on dump it says no mirror on the link given,, and of course on mega quota exceeeded

br.,

**...:::::NP™:::::...** · 07-14-2020, 07:46

## Mirror Download Link For Oppo A3s Dump & Security Data

Dump_OPPO_A3S_CPH1803EX_11_A.17_Samsung_eMMC__QE63 MB_06_03_2020_16_08_12

Download ====> Link 1 !! Link 2 !! Link 3

Dump_OPPO_A3S_CPH1803EX_11_A.17_Samsung_eMMC_oppod ycnvbk_+_oppostanvbk_+_modemst1_+_modemst2_+_fsg_+ _sec_+_modem.7z

Download === Link 1 !! Link 2 !! Link 3

sed_1982 · 07-16-2020, 00:01

after full flash no network

imei null, something i missed?

no baseband. Imei-Null

layder · 07-16-2020, 09:23

Quote:

Originally Posted by sed_1982

after full flash no network

imei null, something i missed?

no baseband. Imei-Null

Instruction about backup and restore security is posted at first message of this topic

sed_1982 · 07-17-2020, 04:51

Quote:

Originally Posted by layder

Instruction about backup and restore security is posted at first message of this topic

sorry sir but this phone come from different repair center..Thats why im looking for nvdata or a data that can revive or restore the nvm data.

carter_ · 07-17-2020, 05:52

great work brother thaks for sharing..

jamohaki · 08-02-2020, 13:08

i have oppo A3s cph1803 with detected in edl i followed the all procedures but still stuck in edl i checked in hardware everything seems to be ok anyway to revive this phone may i missed something ?

solusi hp · 08-03-2020, 07:01

Quote:

Originally Posted by jamohaki

i have oppo A3s cph1803 with detected in edl i followed the all procedures but still stuck in edl i checked in hardware everything seems to be ok anyway to revive this phone may i missed something ?

show your log please

jamohaki · 08-03-2020, 12:16

this exactly what i did:

Quote:

backup security area / partitions:
eMMC_tool Suite ver. 1.6.3.0 (release date: 23.06.2020)
Microsoft Windows 7 (32 bit) build 7601 (6.1.7600.16385)

Looking for EasyJTAG box...
EasyJTAG API ver. 3401
EasyJTAG Box Serial = 1616120653F9FBE6
Card Serial = AA14969B
EasyJTAG Box Firmware = 1.6300

Changelog:

23.06.2020 (ver 1.6.3.0)
Fix: Bugs that have been found through your crash report

Setting frequence to 21 MHz
CMD Pullup Level: 1990 mV
CMD Active Level: 2062 mV
EMMC Device Information :
EMMC CID: 90014A484147346132A5C1E25D7BC5D2
EMMC CSD: D02701328F5903FFFFFFFFE78A400016
EMMC Manufacture : SKHYNIX , EMMC NAME: HAG4a2 , HEX: 484147346132 , S/N: C1E25D7B , rev. 0xA5
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 34316 , Response: Not Clean
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [179] / Boot Bus Config [177] / H/W Reset Function [162]: 0x38 / 0x00 / 0x01
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Backup saved: HAG4a2_C1E25D7B_20200801_084527.extcsd
EMMC Init completed.

Get firmware version

Manufacturer = OPPO
CPU Abi = arm64-v8a
Android release = 8.1.0
Security Patch = 2020-07-05
Brand = OPPO
Device = CPH1803
Model = CPH1803
Firmware version = CPH1803EX_11_A.29
Firmware date = Fri Jul 10 01:27:23 CST 2020

Setting frequence to 21 MHz
CMD Pullup Level: 1804 mV
CMD Active Level: 2062 mV
EMMC Device Information :
EMMC CID: 90014A484147346132A5C1E25D7BC5D2
EMMC CSD: D02701328F5903FFFFFFFFE78A400016
EMMC Manufacture : SKHYNIX , EMMC NAME: HAG4a2 , HEX: 484147346132 , S/N: C1E25D7B , rev. 0xA5
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 34316 , Response: Not Clean
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [179] / Boot Bus Config [177] / H/W Reset Function [162]: 0x38 / 0x00 / 0x01
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Backup saved: HAG4a2_C1E25D7B_20200801_084639.extcsd
EMMC Init completed.

Scanning soft partitions
GPT header is found and is valid
Partition: oppodycnvbk, [000000005000 - 000000A05000], size: 000000A00000 (10.0 MB)
Partition: oppostanvbk, [000000A05000 - 000001405000], size: 000000A00000 (10.0 MB)
Partition: modemst1, [000001405000 - 000001585000], size: 000000180000 (1.50 MB)
Partition: modemst2, [000001585000 - 000001705000], size: 000000180000 (1.50 MB)
Partition: persist, [000001705000 - 000003705000], size: 000002000000 (32.0 MB)
Partition: opporeserve1, [000003705000 - 000003F05000], size: 000000800000 (8.00 MB)
Partition: opporeserve2, [000003F05000 - 000007F05000], size: 000004000000 (64.0 MB)
Partition: reserve_exp1, [000007F05000 - 000008105000], size: 000000200000 (2.00 MB)
Partition: reserve_exp2, [000008105000 - 000008305000], size: 000000200000 (2.00 MB)
Partition: fsc, [000008305000 - 000008305400], size: 000000000400 (1.00 KB)
Partition: ssd, [000008306000 - 000008308000], size: 000000002000 (8.00 KB)
Partition: sbl1, [000008308000 - 000008388000], size: 000000080000 (512. KB)
Partition: rpm, [000008388000 - 000008408000], size: 000000080000 (512. KB)
Partition: tz, [000008408000 - 000008608000], size: 000000200000 (2.00 MB)
Partition: devcfg, [000008608000 - 000008648000], size: 000000040000 (256. KB)
Partition: sbl1bak, [000008648000 - 0000086C8000], size: 000000080000 (512. KB)
Partition: rpmbak, [0000086C8000 - 000008748000], size: 000000080000 (512. KB)
Partition: tzbak, [000008748000 - 000008948000], size: 000000200000 (2.00 MB)
Partition: devcfgbak, [000008948000 - 000008988000], size: 000000040000 (256. KB)
Partition: dsp, [000008988000 - 000009988000], size: 000001000000 (16.0 MB)
Partition: DDR, [00000A000000 - 00000A008000], size: 000000008000 (32.0 KB)
Partition: fsg, [00000A008000 - 00000A188000], size: 000000180000 (1.50 MB)
Partition: sec, [00000A188000 - 00000A18C000], size: 000000004000 (16.0 KB)
Partition: aboot, [00000A18C000 - 00000A28C000], size: 000000100000 (1.00 MB)
Partition: abootbak, [00000A28C000 - 00000A38C000], size: 000000100000 (1.00 MB)
Partition: modem, [00000A38C000 - 00001238C000], size: 000008000000 (128. MB)
Partition: dtbo, [00001238C000 - 000012B8C000], size: 000000800000 (8.00 MB)
Partition: vbmeta, [000012B8C000 - 000012B9C000], size: 000000010000 (64.0 KB)
Partition: boot, [000012B9C000 - 000016B9C000], size: 000004000000 (64.0 MB)
Partition: recovery, [000016B9C000 - 00001AB9C000], size: 000004000000 (64.0 MB)
Partition: devinfo, [00001AB9C000 - 00001AC9C000], size: 000000100000 (1.00 MB)
Partition: splash, [00001B000000 - 00001BB00000], size: 000000B00000 (11.0 MB)
Partition: LOGO, [00001BB00000 - 00001DB00000], size: 000002000000 (32.0 MB)
Partition: DRIVER, [00001DB00000 - 00001FB00000], size: 000002000000 (32.0 MB)
Partition: cache, [00001FB00000 - 00002FB00000], size: 000010000000 (256. MB)
Partition: misc, [00002FB00000 - 00002FC00000], size: 000000100000 (1.00 MB)
Partition: keystore, [00002FC00000 - 00002FC80000], size: 000000080000 (512. KB)
Partition: config, [00002FC80000 - 00002FC88000], size: 000000008000 (32.0 KB)
Partition: oem, [00002FC88000 - 00002FD88000], size: 000000100000 (1.00 MB)
Partition: limits, [000030000000 - 000030008000], size: 000000008000 (32.0 KB)
Partition: mota, [000030800000 - 000030880000], size: 000000080000 (512. KB)
Partition: dip, [000030880000 - 000030980000], size: 000000100000 (1.00 MB)
Partition: mdtp, [000030980000 - 000032980000], size: 000002000000 (32.0 MB)
Partition: syscfg, [000032980000 - 000032A00000], size: 000000080000 (512. KB)
Partition: mcfg, [000032A00000 - 000032E00000], size: 000000400000 (4.00 MB)
Partition: lksecapp, [000033000000 - 000033020000], size: 000000020000 (128. KB)
Partition: cmnlib, [000033020000 - 000033120000], size: 000000100000 (1.00 MB)
Partition: cmnlib64, [000033120000 - 000033220000], size: 000000100000 (1.00 MB)
Partition: keymaster, [000033220000 - 000033320000], size: 000000100000 (1.00 MB)
Partition: lksecappbak, [000033320000 - 000033340000], size: 000000020000 (128. KB)
Partition: cmnlibbak, [000033340000 - 000033440000], size: 000000100000 (1.00 MB)
Partition: cmnlib64bak, [000033440000 - 000033540000], size: 000000100000 (1.00 MB)
Partition: keymasterbak, [000033540000 - 000033640000], size: 000000100000 (1.00 MB)
Partition: apdp, [000033800000 - 000033840000], size: 000000040000 (256. KB)
Partition: msadp, [000033840000 - 000033880000], size: 000000040000 (256. KB)
Partition: dpo, [000033880000 - 000033882000], size: 000000002000 (8.00 KB)
Partition: logdump, [000033882000 - 000037882000], size: 000004000000 (64.0 MB)
Partition: vm-kystore, [000037882000 - 000037982000], size: 000000100000 (1.00 MB)
Partition: vm-data, [000037982000 - 000038382000], size: 000000A00000 (10.0 MB)
Partition: hyp, [000038800000 - 000039000000], size: 000000800000 (8.00 MB)
Partition: vm-system, [000039000000 - 00003D000000], size: 000004000000 (64.0 MB)
Partition: vm-linux, [00003D000000 - 00003F000000], size: 000002000000 (32.0 MB)
Partition: system, [00003F000000 - 000115900000], size: 0000D6900000 (3.35 GB)
Partition: vendor, [000115900000 - 000157860000], size: 000041F60000 (1.03 GB)
Partition: userdata, [000158000000 - 0003AB3FBE00], size: 0002533FBE00 (9.30 GB)
GPT header successfully parsed

Setting frequence to 21 MHz
CMD Pullup Level: 1856 mV
CMD Active Level: 2021 mV
EMMC Device Information :
EMMC CID: 90014A484147346132A5C1E25D7BC5D2
EMMC CSD: D02701328F5903FFFFFFFFE78A400016
EMMC Manufacture : SKHYNIX , EMMC NAME: HAG4a2 , HEX: 484147346132 , S/N: C1E25D7B , rev. 0xA5
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 34316 , Response: Not Clean
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [179] / Boot Bus Config [177] / H/W Reset Function [162]: 0x38 / 0x00 / 0x01
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Backup saved: HAG4a2_C1E25D7B_20200801_084924.extcsd
EMMC Init completed.

Operation: Find table from emmc

Vendor: Qualcomm
Searching GPT ...
GPT header is found and is valid
Checking for ROM2 ...
ROM2 is blank
Checking for ROM3 ...
ROM3 is not blank
GPT header successfully parsed

Operation: Read by vendor...
Destination dir: C:\Program Files\Z3X\EASYJTAGPLUS\A3S BK\

Setting frequence to 21 MHz
CMD Pullup Level: 1907 mV
CMD Active Level: 2052 mV
EMMC Device Information :
EMMC CID: 90014A484147346132A5C1E25D7BC5D2
EMMC CSD: D02701328F5903FFFFFFFFE78A400016
EMMC Manufacture : SKHYNIX , EMMC NAME: HAG4a2 , HEX: 484147346132 , S/N: C1E25D7B , rev. 0xA5
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 34316 , Response: Not Clean
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [179] / Boot Bus Config [177] / H/W Reset Function [162]: 0x38 / 0x00 / 0x01
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Backup saved: HAG4a2_C1E25D7B_20200801_090535.extcsd
EMMC Init completed.

Backup partition: 8xxx_msimage
Address: 000000004400, size: 000000000C00
eMMC switching to ROM1
Reading partition...
Done reading partition. Read speed: 82.53 Kb/s
8xxx image is blank. Skipped

XML-file created successfully

Backup partition: PrimaryGPT
Address: 000000000000, size: 000000004400
GPTHeader is valid

Partition name: oppodycnvbk
Address: 000000005000, size: 000000A00000
eMMC switching to ROM1
Reading partition...
Done reading partition. Read speed: 619.70 Kb/s
Partition name: oppostanvbk
Address: 000000A05000, size: 000000A00000
eMMC switching to ROM1
Reading partition...
Done reading partition. Read speed: 617.96 Kb/s
Partition name: modemst1
Address: 000001405000, size: 000000180000
eMMC switching to ROM1
Reading partition...
Done reading partition. Read speed: 603.13 Kb/s
Partition name: modemst2
Address: 000001585000, size: 000000180000
eMMC switching to ROM1
Reading partition...
Done reading partition. Read speed: 602.15 Kb/s
Partition name: persist
Address: 000001705000, size: 000002000000
eMMC switching to ROM1
Reading partition...
Done reading partition. Read speed: 620.69 Kb/s
Partition name: opporeserve2
Address: 000003F05000, size: 000004000000
eMMC switching to ROM1
Reading partition...
Done reading partition. Read speed: 623.71 Kb/s
Partition name: fsg
Address: 00000A008000, size: 000000180000
eMMC switching to ROM1
Reading partition...
Done reading partition. Read speed: 621.80 Kb/s
Partition name: sec
Address: 00000A188000, size: 000000004000
eMMC switching to ROM1
Reading partition...
Done reading partition. Read speed: 288.48 Kb/s
Partition name: modem
Address: 00000A38C000, size: 000008000000
eMMC switching to ROM1
Reading partition...
Done reading partition. Read speed: 613.82 Kb/s
Partition name: config
Address: 00002FC80000, size: 000000008000
eMMC switching to ROM1
Reading partition...
Done reading partition. Read speed: 413.59 Kb/s

All done time: [00:07:01:684]

write Dump_OPPO A3S CPH1803EX_11_A.17_Samsung eMMC_ QE63MB_06_03_2020_16_08_12.bin :

eMMC_tool Suite ver. 1.6.3.0 (release date: 23.06.2020)
Microsoft Windows 7 (32 bit) build 7601 (6.1.7600.16385)

Looking for EasyJTAG box...
EasyJTAG API ver. 3401
EasyJTAG Box Serial =
Card Serial =
EasyJTAG Box Firmware = 1.6300

Changelog:

23.06.2020 (ver 1.6.3.0)
Fix: Bugs that have been found through your crash report

Setting frequence to 21 MHz
CMD Pullup Level: 1856 mV
CMD Active Level: 2072 mV
EMMC Device Information :
EMMC CID: 90014A484147346132A5C1E25D7BC5D2
EMMC CSD: D02701328F5903FFFFFFFFE78A400016
EMMC Manufacture : SKHYNIX , EMMC NAME: HAG4a2 , HEX: 484147346132 , S/N: C1E25D7B , rev. 0xA5
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 34316 , Response: Not Clean
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [179] / Boot Bus Config [177] / H/W Reset Function [162]: 0x38 / 0x00 / 0x01
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Backup saved: HAG4a2_C1E25D7B_20200801_110854.extcsd
EMMC Init completed.

Operation: Writing eMMC...

Writing to: ROM1 , start: 0x000000000000 , size: 0x00000FA00000
Input file: C:\Users\jms\Desktop\TEMP\OPPO A3S CPH1803EX\New folder\Samsung eMMC _06_03_2020_16_08_12.bin
eMMC switching to ROM1
Writing partition...
Done writing partition. Write speed: 480.12 KB/s

All done time: [00:08:53:725]

flash firmware, CPH1803EX_11_A.17_190323_102b469c

Operation: Extract OFP
Filename: CPH1803EX_11_A.17_190323_102b469c.ofp

XML found
Extracting files. Please, wait ...
Extracted 61 files

All done

Setting frequence to 21 MHz
CMD Pullup Level: 1928 mV
CMD Active Level: 2072 mV
EMMC Device Information :
EMMC CID: 90014A484147346132A5C1E25D7BC5D2
EMMC CSD: D02701328F5903FFFFFFFFE78A400016
EMMC Manufacture : SKHYNIX , EMMC NAME: HAG4a2 , HEX: 484147346132 , S/N: C1E25D7B , rev. 0xA5
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 34316 , Response: Not Clean
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [179] / Boot Bus Config [177] / H/W Reset Function [162]: 0x38 / 0x00 / 0x01
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Backup saved: HAG4a2_C1E25D7B_20200801_121400.extcsd
EMMC Init completed.

Opening file: rawprogram0.xml

The size of the last section has been updated

Could not open file: C:\Users\jms\Desktop\TEMP\OPPO A3S CPH1803EX\New folder\A3S NEW\userdata.img

Setting frequence to 21 MHz
CMD Pullup Level: 1928 mV
CMD Active Level: 2052 mV
EMMC Device Information :
EMMC CID: 90014A484147346132A5C1E25D7BC5D2
EMMC CSD: D02701328F5903FFFFFFFFE78A400016
EMMC Manufacture : SKHYNIX , EMMC NAME: HAG4a2 , HEX: 484147346132 , S/N: C1E25D7B , rev. 0xA5
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 34316 , Response: Not Clean
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [179] / Boot Bus Config [177] / H/W Reset Function [162]: 0x38 / 0x00 / 0x01
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Backup saved: HAG4a2_C1E25D7B_20200801_121553.extcsd
EMMC Init completed.

Operation: Write by vendor (Qualcomm/HiSilicon/Omap)

Partition name: oppodycnvbk
Filename: dynamic_nvbk.bin , Offset: 000000005000 , filesize: 10485760 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 664.86 KB/s
Partition name: oppostanvbk
Filename: static_nvbk.bin , Offset: 000000A05000 , filesize: 10485760 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 768.03 KB/s
Partition name: persist
Filename: persist.img , Offset: 000001705000 , filesize: 5132700 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 32
Done writing partition. Write speed: 675.45 KB/s
Partition name: opporeserve1
Filename: emmc_fw.bin , Offset: 000003705000 , filesize: 4194304 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 774.40 KB/s
Partition name: opporeserve2
Filename: opporeserve2.img , Offset: 000003F05000 , filesize: 5300372 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 10
Done writing partition. Write speed: 749.69 KB/s
Partition name: sbl1
Filename: sbl1.mbn , Offset: 000008308000 , filesize: 452656 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 699.75 KB/s
Partition name: rpm
Filename: rpm.mbn , Offset: 000008388000 , filesize: 174884 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 626.26 KB/s
Partition name: tz
Filename: tz.mbn , Offset: 000008408000 , filesize: 1535872 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 746.27 KB/s
Partition name: devcfg
Filename: devcfg.mbn , Offset: 000008608000 , filesize: 40220 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 385.54 KB/s
Partition name: sbl1bak
Filename: sbl1.mbn , Offset: 000008648000 , filesize: 452656 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 710.78 KB/s
Partition name: rpmbak
Filename: rpm.mbn , Offset: 0000086C8000 , filesize: 174884 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 634.04 KB/s
Partition name: tzbak
Filename: tz.mbn , Offset: 000008748000 , filesize: 1535872 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 752.91 KB/s
Partition name: devcfgbak
Filename: devcfg.mbn , Offset: 000008948000 , filesize: 40220 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 385.76 KB/s
Partition name: dsp
Filename: adspso.bin , Offset: 000008988000 , filesize: 16777216 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 773.08 KB/s
Partition name: aboot
Filename: emmc_appsboot.mbn , Offset: 00000A18C000 , filesize: 738876 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 719.78 KB/s
Partition name: abootbak
Filename: emmc_appsboot.mbn , Offset: 00000A28C000 , filesize: 738876 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 728.10 KB/s
Partition name: modem
Filename: NON-HLOS.bin , Offset: 00000A38C000 , filesize: 134217728 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 771.74 KB/s
Partition name: dtbo
Filename: dtbo.img , Offset: 00001238C000 , filesize: 8388608 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 771.27 KB/s
Partition name: vbmeta
Filename: vbmeta.img , Offset: 000012B8C000 , filesize: 4096 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 107.16 KB/s
Partition name: boot
Filename: boot.img , Offset: 000012B9C000 , filesize: 67108864 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 772.04 KB/s
Partition name: recovery
Filename: recovery.img , Offset: 000016B9C000 , filesize: 67108864 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 768.03 KB/s
Partition name: LOGO
Filename: logo.bin , Offset: 00001BB00000 , filesize: 878080 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 724.73 KB/s
Partition name: DRIVER
Filename: DRIVER.ISO , Offset: 00001DB00000 , filesize: 23795712 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 769.82 KB/s
Partition name: cache
Filename: cache.img , Offset: 00001FB00000 , filesize: 6398160 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 15
Done writing partition. Write speed: 740.72 KB/s
Partition name: mdtp
Filename: mdtp.img , Offset: 000030980000 , filesize: 17808306 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 763.34 KB/s
Partition name: lksecapp
Filename: lksecapp.mbn , Offset: 000033000000 , filesize: 57352 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 456.05 KB/s
Partition name: cmnlib
Filename: cmnlib_30.mbn , Offset: 000033020000 , filesize: 213856 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 629.73 KB/s
Partition name: cmnlib64
Filename: cmnlib64_30.mbn , Offset: 000033120000 , filesize: 269088 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 615.89 KB/s
Partition name: keymaster
Filename: keymaster64.mbn , Offset: 000033220000 , filesize: 271480 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 626.81 KB/s
Partition name: lksecappbak
Filename: lksecapp.mbn , Offset: 000033320000 , filesize: 57352 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 457.28 KB/s
Partition name: cmnlibbak
Filename: cmnlib_30.mbn , Offset: 000033340000 , filesize: 213856 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 692.33 KB/s
Partition name: cmnlib64bak
Filename: cmnlib64_30.mbn , Offset: 000033440000 , filesize: 269088 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 658.32 KB/s
Partition name: keymasterbak
Filename: keymaster64.mbn , Offset: 000033540000 , filesize: 271480 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 672.74 KB/s
Partition name: apdp
Filename: dpAP.mbn , Offset: 000033800000 , filesize: 13248 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 180.21 KB/s
Partition name: system
Filename: system.img , Offset: 00003F000000 , filesize: 3208174868 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 4714
Done writing partition. Write speed: 743.25 KB/s
Partition name: vendor
Filename: vendor.img , Offset: 000115900000 , filesize: 978552928 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 2907
Done writing partition. Write speed: 721.23 KB/s

All done time: [01:53:29:845]

layder · 08-03-2020, 14:08

at last operation - Write by vendor you need write backup only secure partition
If you write all partition - you restore you device to original state

you need:
1) backup secure partitioon only, or backup all without usedata, syste, cache
2) Write work dump or extracted ofp firmware
3) restore only secute partition if you write dump

06-11-2020, 12:59	#16 (permalink)
...:::::NP™:::::... Moderator Join Date: Nov 2009 Location: South Africa > Bangladesh Age: 40 Posts: 10,802 Member: 1162626 Status: Offline Sonork: 100.1591727 QQ:2337938173 Thanks Meter: 11,053	Hi, High speed not sweet able or Per hubs for your required job. You set the high speed mode For erasing purpose, just set the low frequency as per as my posting image 9Mhz Bus1Bit. __________________ -------------------------- Use Search Button to get Instant Result \| Follow Forum Rules Avoid Spams in the forum to prevent ban your account.

07-14-2020, 07:46	#22 (permalink)
...:::::NP™:::::... Moderator Join Date: Nov 2009 Location: South Africa > Bangladesh Age: 40 Posts: 10,802 Member: 1162626 Status: Offline Sonork: 100.1591727 QQ:2337938173 Thanks Meter: 11,053	## Mirror Download Link For Oppo A3s Dump & Security Data Dump_OPPO_A3S_CPH1803EX_11_A.17_Samsung_eMMC__QE63 MB_06_03_2020_16_08_12 Download ====> Link 1 !! Link 2 !! Link 3 Dump_OPPO_A3S_CPH1803EX_11_A.17_Samsung_eMMC_oppod ycnvbk_+_oppostanvbk_+_modemst1_+_modemst2_+_fsg_+ _sec_+_modem.7z Download === Link 1 !! Link 2 !! Link 3 __________________ -------------------------- Use Search Button to get Instant Result \| Follow Forum Rules Avoid Spams in the forum to prevent ban your account.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-14-2020, 14:53	#17 (permalink)
GSMSHOP1 Freak Poster Join Date: Jan 2007 Posts: 262 Member: 443140 Status: Offline Thanks Meter: 44	hello ihave oppo a3s problme the current image boot recovery have if just flash recovery and boot with easy jtag i cant work to enter in recovery mode,????????????

06-25-2020, 05:32	#19 (permalink)
zack winstone Freak Poster Join Date: Nov 2014 Posts: 451 Member: 2287102 Status: Offline Thanks Meter: 119	I can not see the rowprogram0 when i backup

07-14-2020, 06:39	#21 (permalink)
sed_1982 Freak Poster Join Date: Jun 2007 Location: iOS4 Posts: 329 Member: 527421 Status: Offline Thanks Meter: 43	Help can't download on dump it says no mirror on the link given,, and of course on mega quota exceeeded br.,

07-16-2020, 00:01	#23 (permalink)
sed_1982 Freak Poster Join Date: Jun 2007 Location: iOS4 Posts: 329 Member: 527421 Status: Offline Thanks Meter: 43	after full flash no network imei null, something i missed? no baseband. Imei-Null

07-17-2020, 05:52	#26 (permalink)
carter_ Junior Member Join Date: Aug 2010 Location: cabiao nueva ecija Posts: 22 Member: 1365577 Status: Offline Sonork: carter_ Thanks Meter: 1	great work brother thaks for sharing..

08-02-2020, 13:08	#27 (permalink)
jamohaki No Life Poster Join Date: Sep 2004 Age: 51 Posts: 2,066 Member: 83397 Status: Offline Thanks Meter: 193	i have oppo A3s cph1803 with detected in edl i followed the all procedures but still stuck in edl i checked in hardware everything seems to be ok anyway to revive this phone may i missed something ?

08-03-2020, 14:08	#30 (permalink)
layder Product Supporter Join Date: Jun 2002 Location: Belarus Age: 46 Posts: 3,156 Member: 13148 Status: Offline Thanks Meter: 2,839	at last operation - Write by vendor you need write backup only secure partition If you write all partition - you restore you device to original state you need: 1) backup secure partitioon only, or backup all without usedata, syste, cache 2) Write work dump or extracted ofp firmware 3) restore only secute partition if you write dump