Oppo CPH1931 dead 9008 mode

[shooster]

I did all soldering safely phone connected via emmc and I performed Oppo reset successfully.

But I tapped on Frp Clear first tool got stuck like 10 secs then it said done but I tried to switch on the device failed now stuck in 9008 model.

CLK and CMD resistor ok nothing damaged. What can I do?

Sent from my SM-G770F using Tapatalk

[layder]

you need check hardware and check boot partiton for non-damage (sbl, tz, rpm, boot)

[sree krishna]

Originally Posted by shooster

I did all soldering safely phone connected via emmc and I performed Oppo reset successfully.

But I tapped on Frp Clear first tool got stuck like 10 secs then it said done but I tried to switch on the device failed now stuck in 9008 model.

CLK and CMD resistor ok nothing damaged. What can I do?

Sent from my SM-G770F using Tapatalk

befor doing any operation You must take the backup

write the backup if you face any problem after done any operation

[shooster]

Originally Posted by layder

you need check hardware and check boot partiton for non-damage (sbl, tz, rpm, boot)

If I make full flash on msm tool will it revive my device

Originally Posted by sree krishna

befor doing any operation You must take the backup



write the backup if you face any problem after done any operation

You mean full emmc back up or I just write the ext. card.

Sent from my SM-G770F using Tapatalk

[sree krishna]

Originally Posted by shooster

You mean full emmc back up or I just write the ext. card.

before doing any operation,
You must backup Rom-1, Rom-2, Rom-3

Originally Posted by shooster

If I make full flash on msm tool will it revive my device

do not try like.

if you not have backup then download full dumb file and write
If not solve the issue after written full dumb?.

Post full log,
will guide u.