OPPO's (Realme) FRP/Code/Pattern reset thread. Post operations, pinout here - Page 5 - GSM-Forum

royalnasim · 07-21-2019, 10:52

OPPO A3S HANG ON LOGO AND UNLOCK DONE BY EASY JTAG PLUS

imanka · 07-21-2019, 18:28

imanka · 07-21-2019, 18:35

imanka · 07-22-2019, 16:24

another one done

umar342 · 07-23-2019, 18:59

i have1 realme 2 set is dead via isp pinout i try on line flash oppo survise center but not flash set still dead set show full info when i cannect isp pinout dose any one khow what should i do

khanraheem143 · 07-25-2019, 12:56

Quote:

Originally Posted by VC_INDIA

Wipe

FRP

Regard
VC_INDIA

Bro,
Can u share pinout?
tried to search on google but not working.
where is gnd??

khanraheem143 · 07-25-2019, 13:17

Quote:

Originally Posted by khanraheem143

Bro,
Can u share pinout?
tried to search on google but not working.
where is gnd??

Z3X EasyJtag Software ver. 3.6.1.11
Loading eMMC GEN1 Firmware... IO: 3300 mV
Box S/N: 06009012EE2027F8, ,FW Ver.: 01.63
Warning: CMD Pullup Level (0 mV) too low , check cables etc.!
CMD Active Level:237 mV
Box IO Level:3300 mV
CLK Rate:21000 kHz
Bus Width:1bit,SDR
HiPower mode is ON!
Can't init device, Reason: CMD CRC Error
Done.

Z3X EasyJtag Software ver. 3.6.1.11
Loading eMMC GEN1 Firmware... IO: 3300 mV
Box S/N: 06009012EE2027F8, ,FW Ver.: 01.63
CMD Pullup Level:2031 mV
CMD Active Level:2949 mV
Box IO Level:3300 mV
CLK Rate:21000 kHz
Bus Width:1bit,SDR
HiPower mode is ON!
Can't init device, Reason: CMD Timeout Error
Done.

Z3X EasyJtag Software ver. 3.6.1.11
Loading eMMC GEN1 Firmware... IO: 3300 mV
Box S/N: 06009012EE2027F8, ,FW Ver.: 01.63
CMD Pullup Level:2031 mV
CMD Active Level:3000 mV
Box IO Level:3300 mV
CLK Rate:21000 kHz
Bus Width:1bit,SDR
HiPower mode is ON!
Can't init device, Reason: CMD Timeout Error
Done.

**chand_gee** · 07-27-2019, 18:01

Quote:

Originally Posted by royalnasim

OPPO A3S HANG ON LOGO AND UNLOCK DONE BY EASY JTAG PLUS

proof for thoes who say wire lenth must be 2 inch in order to detect emmc

pintu_das · 07-28-2019, 09:30

Oppo A5 (CPH1809) unlock done

eMMC CID : 150100524436344D4201D4D5D49C554E
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 05/2018 Rev.0x1
eMMC NAME: RD64MB , S/N: 3570783388
eMMC NAME (HEX): 524436344D42
EMMC ROM1 (Main User Data) Capacity: 29820 MB , 0x3A3E000 pages , 0x747C00000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC RPMB is programmed and written 3472 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Writing Recovery Command to MISC (33)
Done.

shivapradhan0 · 07-28-2019, 12:28

OPPO CPH1901 A7 PATTERN UNLOCK DONE SUCCESS ,ONE CLICK WITH EASYJTAG PLUS

nagisa_moe · 07-31-2019, 12:06

Running:Format FRP Partition...
Z3X EasyJtag Software ver. 3.6.1.9
Loading eMMC GEN1 Firmware... IO: 1800 mV
FW Ver.: 01.63
CMD Pullup Level:1722 mV
CMD Active Level:1742 mV
Box IO Level:1800 mV
CLK Rate:14000 kHz
Bus Width:1bit,SDR
HiPower mode is ON!
---------- eMMC Device Information ----------

eMMC CID : 90014A6844456150330360E5680F3686
eMMC CSD : D02700328F5903FFFFFFFFEF8E400042
eMMC Manufacturer ID: 0090 , OEM ID: 014A
eMMC Date: 03/2019 Rev.0x3
eMMC NAME: hDEaP3 , S/N: 1625647119
eMMC NAME (HEX): 684445615033
EMMC ROM1 (Main User Data) Capacity: 119280 MB , 0xE8F8000 pages , 0x1D1F000000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 347 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x02 , width 8bits , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: E8F8000 sectors 116.5 GiB
Soft (Partitioned) Disk/Image size: E8F7FBC sectors 116.5 GiB
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,244285406
Partition info successfully found
Formatting FRP...
Detected LINUX(Android) FRP : 0x000DE88000 (1.0MB) formatting...
Done.
Detected LINUX(Android) CACHE : 0x01D0800000 (432.0MB) , formatting...
Done.
Detected LINUX(Android) USERDATA : 0x01EB800000 (108.746GB) , formatting...
Done.

inat · 08-01-2019, 03:12

Detected LINUX(Android) SYSTEM : 0x003E800000 (3.968GB)
Build ID: OPM1.171019.026
Release Base ID: 8.1.0
Architecture ABI: arm64-v8a
Device manufacturer: OPPO
Build Description: msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20190711.000250 release-keys
---------------------------------------------
Detected USERDATA USERDATA : 0x017E800000 (52.264GB)
Unable to mount USERDATA , code : 95
Done.

Checking security ...
Z3X EasyJtag Software ver. 3.6.1.9
Loading eMMC GEN2 Firmware... IO: 2800 mV
Box S/N: DBB477427EC2E4FA, ,FW Ver.: 02.44
CMD Pullup Level:2053 mV
CMD Active Level:2718 mV
Box IO Level:2800 mV
CLK Rate:24000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------

eMMC CID : 1501005248363441420522C49A61C5D9
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400D
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 12/2018 Rev.0x5
eMMC NAME: RH64AB , S/N: 583309921
eMMC NAME (HEX): 524836344142
EMMC ROM1 (Main User Data) Capacity: 59640 MB , 0x747C000 pages , 0xE8F800000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC RPMB is programmed and written 1098 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Writing Recovery Command to MISC (33)
Done.

Resident_Evil · 08-02-2019, 13:29

User lock

Quote:

eMMC CID : 150100514436334D42034F34D81D16BD
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400D
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 01/2019 Rev.0x3
eMMC NAME: QD63MB , S/N: 1328863261
eMMC NAME (HEX): 514436334D42
EMMC ROM1 (Main User Data) Capacity: 29820 MB , 0x3A3E000 pages , 0x747C00000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 303 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x02 , width 8bits , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 3A3E000 sectors 29.1 GiB
Soft (Partitioned) Disk/Image size: 3A3DFBC sectors 29.1 GiB
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,61071326
Partition info successfully found
------ Android information ------
Detected (Android Userdata) USERDATA : 0x01BB800000 (22.132GB)
Erasing...
Done.
Detected (Android Cache)) CACHE : 0x01A0800000 (432.0MB)
Erasing...
Done.
---------------------------------------------
Done.

FRP Logs

Quote:

eMMC CID : 150100514436334D42034F34D81D16BD
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400D
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 01/2019 Rev.0x3
eMMC NAME: QD63MB , S/N: 1328863261
eMMC NAME (HEX): 514436334D42
EMMC ROM1 (Main User Data) Capacity: 29820 MB , 0x3A3E000 pages , 0x747C00000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 303 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x02 , width 8bits , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 3A3E000 sectors 29.1 GiB
Soft (Partitioned) Disk/Image size: 3A3DFBC sectors 29.1 GiB
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,61071326
Partition info successfully found
Formatting FRP...
Detected LINUX(Android) FRP : 0x000BE88000 (1.0MB) formatting...
Done.
Detected LINUX(Android) CACHE : 0x01A0800000 (432.0MB) , formatting...
Done.
Detected LINUX(Android) USERDATA : 0x01BB800000 (22.132GB) , formatting...
Done.
Done.
Done.

Done Many A1k Without Any risk

Regard
Devil

inocentedeti · 08-04-2019, 08:59

good job sir, clear and sound safe to remove FRP via TP

Gsmnirmal · 08-04-2019, 11:56

oppo a1k emmc pinout send bro

07-21-2019, 10:52	#61 (permalink)
royalnasim No Life Poster Join Date: May 2009 Location: mumbai wadala Posts: 747 Member: 1037372 Status: Offline Thanks Meter: 557	Oppo a3s hang on logo and unlock done by easy jtag plus OPPO A3S HANG ON LOGO AND UNLOCK DONE BY EASY JTAG PLUS

07-21-2019, 18:28	#62 (permalink)
imanka No Life Poster Join Date: Oct 2010 Location: phone repairing Posts: 818 Member: 1409573 Status: Offline Sonork: 100.1615416 Thanks Meter: 84	oppo a3s reset done

07-28-2019, 09:30	#69 (permalink)
pintu_das No Life Poster Join Date: Jan 2015 Location: Narsingdi, Dhaka, Bangladesh Age: 28 Posts: 2,207 Member: 2325851 Status: Offline Sonork: 100.1680491 Thanks Meter: 2,363	Oppo A5 (CPH1809) unlock done Oppo A5 (CPH1809) unlock done eMMC CID : 150100524436344D4201D4D5D49C554E eMMC CSD : D02701320F5903FFF6DBFFEF8E40400C eMMC Manufacturer ID: 0015 , OEM ID: 0100 eMMC Date: 05/2018 Rev.0x1 eMMC NAME: RD64MB , S/N: 3570783388 eMMC NAME (HEX): 524436344D42 EMMC ROM1 (Main User Data) Capacity: 29820 MB , 0x3A3E000 pages , 0x747C00000 bytes EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB EMMC RPMB is programmed and written 3472 times EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No EMMC Password Locked: No Extended CSD rev 1.8 (MMC 5.1) Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area) Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38. H/W reset function [RST_N_FUNCTION]: 0x01 High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000] Partitioning Support [PARTITIONING_SUPPORT]: 0x07 Device support partitioning feature Device can have enhanced tech. Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00 --------------------------------------------- Writing Recovery Command to MISC (33) Done.

07-31-2019, 12:06	#71 (permalink)
nagisa_moe Junior Member Join Date: Feb 2015 Posts: 8 Member: 2353294 Status: Offline Thanks Meter: 4	oppo f11 pro cph1969 format frp done Running:Format FRP Partition... Z3X EasyJtag Software ver. 3.6.1.9 Loading eMMC GEN1 Firmware... IO: 1800 mV FW Ver.: 01.63 CMD Pullup Level:1722 mV CMD Active Level:1742 mV Box IO Level:1800 mV CLK Rate:14000 kHz Bus Width:1bit,SDR HiPower mode is ON! ---------- eMMC Device Information ---------- eMMC CID : 90014A6844456150330360E5680F3686 eMMC CSD : D02700328F5903FFFFFFFFEF8E400042 eMMC Manufacturer ID: 0090 , OEM ID: 014A eMMC Date: 03/2019 Rev.0x3 eMMC NAME: hDEaP3 , S/N: 1625647119 eMMC NAME (HEX): 684445615033 EMMC ROM1 (Main User Data) Capacity: 119280 MB , 0xE8F8000 pages , 0x1D1F000000 bytes EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB EMMC RPMB is programmed and written 347 times EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No EMMC Password Locked: No Extended CSD rev 1.8 (MMC 5.1) Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1) Boot bus config [177]: 0x02 , width 8bits , Partition config [179]: 0x48. H/W reset function [RST_N_FUNCTION]: 0x01 High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000] Partitioning Support [PARTITIONING_SUPPORT]: 0x07 Device support partitioning feature Device can have enhanced tech. Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00 --------------------------------------------- Found valid GPT with protective MBR; using GPT. Real (Hardware) Disk/Image size: E8F8000 sectors 116.5 GiB Soft (Partitioned) Disk/Image size: E8F7FBC sectors 116.5 GiB Disk identifier (GUID): 00000000-0000-0000-0000-000000000000 Logical sector size: 0x200 bytes ,First/Last usable sector: 34,244285406 Partition info successfully found Formatting FRP... Detected LINUX(Android) FRP : 0x000DE88000 (1.0MB) formatting... Done. Detected LINUX(Android) CACHE : 0x01D0800000 (432.0MB) , formatting... Done. Detected LINUX(Android) USERDATA : 0x01EB800000 (108.746GB) , formatting... Done.

08-01-2019, 03:12	#72 (permalink)
inat No Life Poster Join Date: May 2005 Location: Baguio City, Benguet Posts: 822 Member: 149576 Status: Offline Thanks Meter: 57	oppo A7 (cph1903) password removed Detected LINUX(Android) SYSTEM : 0x003E800000 (3.968GB) Build ID: OPM1.171019.026 Release Base ID: 8.1.0 Architecture ABI: arm64-v8a Device manufacturer: OPPO Build Description: msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20190711.000250 release-keys --------------------------------------------- Detected USERDATA USERDATA : 0x017E800000 (52.264GB) Unable to mount USERDATA , code : 95 Done. Checking security ... Z3X EasyJtag Software ver. 3.6.1.9 Loading eMMC GEN2 Firmware... IO: 2800 mV Box S/N: DBB477427EC2E4FA, ,FW Ver.: 02.44 CMD Pullup Level:2053 mV CMD Active Level:2718 mV Box IO Level:2800 mV CLK Rate:24000 kHz Bus Width:1bit,SDR HiPower mode is off! ---------- eMMC Device Information ---------- eMMC CID : 1501005248363441420522C49A61C5D9 eMMC CSD : D02701320F5903FFF6DBFFEF8E40400D eMMC Manufacturer ID: 0015 , OEM ID: 0100 eMMC Date: 12/2018 Rev.0x5 eMMC NAME: RH64AB , S/N: 583309921 eMMC NAME (HEX): 524836344142 EMMC ROM1 (Main User Data) Capacity: 59640 MB , 0x747C000 pages , 0xE8F800000 bytes EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB EMMC RPMB is programmed and written 1098 times EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No EMMC Password Locked: No Extended CSD rev 1.8 (MMC 5.1) Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area) Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38. H/W reset function [RST_N_FUNCTION]: 0x01 High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000] Partitioning Support [PARTITIONING_SUPPORT]: 0x07 Device support partitioning feature Device can have enhanced tech. Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00 --------------------------------------------- Writing Recovery Command to MISC (33) Done.

07-21-2019, 18:35	#63 (permalink)
imanka No Life Poster Join Date: Oct 2010 Location: phone repairing Posts: 818 Member: 1409573 Status: Offline Sonork: 100.1615416 Thanks Meter: 84

07-22-2019, 16:24	#64 (permalink)
imanka No Life Poster Join Date: Oct 2010 Location: phone repairing Posts: 818 Member: 1409573 Status: Offline Sonork: 100.1615416 Thanks Meter: 84	another one done

07-23-2019, 18:59	#65 (permalink)
umar342 No Life Poster Join Date: Feb 2010 Location: india Posts: 1,085 Member: 1246696 Status: Offline Sonork: 100.1681950 Thanks Meter: 650	i have1 realme 2 set is dead via isp pinout i try on line flash oppo survise center but not flash set still dead set show full info when i cannect isp pinout dose any one khow what should i do

07-28-2019, 12:28	#70 (permalink)
shivapradhan0 Freak Poster Join Date: Sep 2009 Location: NEPAL Posts: 354 Member: 1128042 Status: Offline Sonork: 100.1666710 Thanks Meter: 155	OPPO CPH1901 A7 PATTERN UNLOCK DONE SUCCESS ,ONE CLICK WITH EASYJTAG PLUS

08-04-2019, 08:59	#74 (permalink)
inocentedeti Major Poster Join Date: Dec 2008 Location: litle alaska philippines Age: 34 Posts: 45 Member: 933096 Status: Offline Sonork: inocentedeti Thanks Meter: 19	good job sir, clear and sound safe to remove FRP via TP

08-04-2019, 11:56	#75 (permalink)
Gsmnirmal Junior Member Join Date: Aug 2018 Posts: 1 Member: 2860027 Status: Offline Sonork: 100.650600 Thanks Meter: 0	easyjtag plus oppo a1k emmc pinout send bro