|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
|
Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source |
Easy-Jtag / Easy-Jtag Plus The official support section. You can ask here your question and get answer regarding using Easy-Jtag / Easy-Jtag Plus. |
| LinkBack | Thread Tools | Display Modes |
05-10-2022, 19:16 | #1 (permalink) |
No Life Poster Join Date: Feb 2009 Location: inside apples a15
Posts: 886
Member: 975554 Status: Offline Sonork: KG state:prenormal Thanks Meter: 253 | pls support this emmc Change EasyJTAG Pinout OK Z3X EasyJtag Software ver. 3.7.0.24 Loading eMMC GEN2 Firmware... IO: 2400 mV Box S/N: 772244E1C0A01237, ,FW Ver.: 02.53 CMD Pullup Level:2060 mV CMD Active Level:2210 mV Box IO Level:2400 mV CLK Rate:6000 kHz Bus Width:1bit,SDR HiPower mode is ON! ---------- eMMC Device Information ---------- eMMC CID : 880103534C4433326A404D8D60B3C77B eMMC CSD : D0FFFF329F5903FFFFFFFFEF9640002D eMMC Manufacturer ID: 0088 , OEM ID: 0103 eMMC Date: 12/2020 Rev.0x40 eMMC NAME: SLD32j , S/N: 1301110963 eMMC NAME (HEX): 534C4433326A Can't init EMMC, Reason: DATA RCV Timeout Error Check Data Line! Done. Can't init device, Reason: Initialization failed Done. its foresee emmc |
05-11-2022, 09:24 | #2 (permalink) |
Freak Poster Join Date: Aug 2010 Location: Russia,Yekaterinburg
Posts: 102
Member: 1363017 Status: Offline Thanks Meter: 44 | Check Data Line! Check the correctness and quality of the Data0 sub-soldering |
The Following User Says Thank You to andrei_d1978 For This Useful Post: |
05-11-2022, 11:00 | #3 (permalink) |
No Life Poster Join Date: Feb 2009 Location: inside apples a15
Posts: 886
Member: 975554 Status: Offline Sonork: KG state:prenormal Thanks Meter: 253 | thanks used bigger and shoter wires now full connected eMMC CID : 880103534C4433326A404D8D60B3C77B eMMC CSD : D0FFFF329F5903FFFFFFFFEF9640002D eMMC Manufacturer ID: 0088 , OEM ID: 0103 eMMC Date: 12/2020 Rev.0x40 eMMC NAME: SLD32j , S/N: 1301110963 eMMC NAME (HEX): 534C4433326A EMMC ROM1 (Main User Data) Capacity: 29600 MB EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB EMMC RPMB is programmed and written 1451 times EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No EMMC Password Locked: No Extended CSD rev 1.8 (MMC 5.1) Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured. Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00. H/W reset function [RST_N_FUNCTION]: 0x01 High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000] Partitioning Support [PARTITIONING_SUPPORT]: 0x07 Device support partitioning feature Device can have enhanced tech. Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00 --------------------------------------------- Backup saved: SLD32j_1301110963_20220511_0958.extcsd The protective MBR's 0xEE partition is oversized! Auto-repairing. Found valid GPT with protective MBR; using GPT. Real (Hardware) Disk/Image size: 39D0000 sectors 28.9 GiB Soft (Partitioned) Disk/Image size: 39CFFBC sectors 28.9 GiB Disk identifier (GUID): 615E9634-5B62-7DD9-C274-FDB531B79098 Logical sector size: 0x200 bytes ,First/Last usable sector: 34,60620766 |
Bookmarks |
| |
|