GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Easy-Jtag / Easy-Jtag Plus (https://forum.gsmhosting.com/vbb/f672/)
-   -   samsung j100h emmc repaire done with jtag (https://forum.gsmhosting.com/vbb/f672/samsung-j100h-emmc-repaire-done-jtag-2365775/)

Deepesh Sharma 11-20-2016 08:39

samsung j100h emmc repaire done with jtag
 
Hello
Samsung j100h Dead Recover With Easy Jtag
https://s20.postimg.org/eael3sl0t/j100.png
You See Here Chunk Error But Now Handset Go In Download Mode And Flash With Odin Now Set Working Fine
Sucessfully Dead Boot Recovered

saleem5001 11-20-2016 10:34

power full post with story of success

bronce 11-29-2016 06:08

kindly share the file you used pls.

btw,
useful info.

Deepesh Sharma 11-29-2016 10:38

Quote:

Originally Posted by bronce (Post 12189082)
kindly share the file you used pls.

btw,
useful info.

factory repair file
J100H_XXU0AOA1_OXE0AOA1

kimdonghwan 12-03-2016 17:04

Quote:

Originally Posted by Deepesh_Sharma (Post 12189701)
factory repair file
J100H_XXU0AOA1_OXE0AOA1

Hello,

My friend bring his SM-J100h/DS to me asking for repair.
it was stuck on boot so i tried to Wipe Data / Factory Reset, but there were many errors, something like "E: can't mount....."

After that, i flashed it with ODIN 3.09 + the latest firmware (September 29, 2016 based on my country code)
The flash was successful and PASS 100%..
but still stuck on boot logo.

so, i found a video on Youtube about this..

i did everything exactly the same:

ROM => J100H_XXU0AOA1_OXE0AOA1 (contain files as shown below)
BL => BL_J100HXXU0AOA1_CL333157_QB3542504_REV01_user_low _ship
AP => AP_J100HXXU0AOA1_CL333157_QB3542504_REV01_user_low _ship
CP => CP_J100HXXU0AOA1_CL333157_QB3542504_REV01_user_low _ship
CSC => CSC_OXE_J100HOXE0AOA1_CL333157_QB3542504_REV01_use r_low_ship
PIT => J13G (Repartition)

The flash once again PASS 100% and the device rebooted automatically but NO POWER.
It is completely DEAD now.
i removed the Battery, put it on again, still cannot be powered on.
i plugged in the USB charging cable, still no power, no charging indicator.

It's now completely dead.
What shall i do now?
Somebody please help me..
i'm a dead man now..

Many thanks in advance

juwana_pati 12-03-2016 17:16

Quote:

Originally Posted by kimdonghwan (Post 12199325)
Hello,

My friend bring his SM-J100h/DS to me asking for repair.
it was stuck on boot so i tried to Wipe Data / Factory Reset, but there were many errors, something like "E: can't mount....."

After that, i flashed it with ODIN 3.09 + the latest firmware (September 29, 2016 based on my country code)
The flash was successful and PASS 100%..
but still stuck on boot logo.

so, i found a video on Youtube about this..

i did everything exactly the same:

ROM => J100H_XXU0AOA1_OXE0AOA1 (contain files as shown below)
BL => BL_J100HXXU0AOA1_CL333157_QB3542504_REV01_user_low _ship
AP => AP_J100HXXU0AOA1_CL333157_QB3542504_REV01_user_low _ship
CP => CP_J100HXXU0AOA1_CL333157_QB3542504_REV01_user_low _ship
CSC => CSC_OXE_J100HOXE0AOA1_CL333157_QB3542504_REV01_use r_low_ship
PIT => J13G (Repartition)

The flash once again PASS 100% and the device rebooted automatically but NO POWER.
It is completely DEAD now.
i removed the Battery, put it on again, still cannot be powered on.
i plugged in the USB charging cable, still no power, no charging indicator.

It's now completely dead.
What shall i do now?
Somebody please help me..
i'm a dead man now..

Many thanks in advance

Same with me ..then i try tu isp pin out but not conected...any one have tested isp pinout j100

Deepesh Sharma 12-04-2016 05:48

Quote:

Originally Posted by juwana_pati (Post 12199337)
Same with me ..then i try tu isp pin out but not conected...any one have tested isp pinout j100

pin out and allready in support or open easy jtag program and you can see pin out in emmc pin section pin out is testing need to solder carefully

Suny125 12-16-2016 14:18

Samsung J100H/DS Boot Repair Pinout / Dead Boot Repair File
 
Samsung J100H/DS Boot Repair Pinout / Dead Boot Repair File


http://i.imgur.com/5XUlgYW.jpg




Code:

Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: , ,FW Ver.: 01.55
CMD Pullup Level:2031 mV
CMD Active Level:2371 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower mode is off!
---------- eMMC Device Information ----------


EMMC CID : 1501004E4A325A4D42009E73B45192AC

EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 09/2015 Rev.0x0
EMMC NAME: NJ2ZMB , S/N: 2658382929
EMMC NAME (HEX): 4E4A325A4D4200
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)

Boot configuration [PARTITION_CONFIG: 0x08] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x08.
H/W reset function [RST_N_FUNCTION]: 0x00

High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]

Partitioning Support [PARTITIONING_SUPPORT]: 0x07

Device support partitioning feature

Device can have enhanced tech.

Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00

---------------------------------------------

Backup saved: NJ2ZMB_2658382929_20161009_1201.extcsd
Done.

Z3X EasyJtag Software ver. 2.4.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2031 mV
CMD Active Level:2371 mV
Input file : E:\JTAG\Z3X Easy-JTAG\J100H\SM-J100h_J100HXCU0AOD4_ROM1_OK.bin
Writing 0040000000 bytes to 00000000 ...ROM1 (USER ROM)
Done. Write Speed: 941 kB/s

Br
Suny125

mobifone 12-17-2016 07:26

@Suny125
could you please give guide step by step how to repair?

bagus.dps 01-15-2017 19:42

this phone hynix emmc you just lucky repair this emmc ... for 100% repair you change it to samsung i solved many time with kmnjs/kmn5x/kmkjs or you can used mercedes emmc kmi8 to make it 1gb ram / 16 gb storage

back up extcd rom1 512 rom2 rom3 . then write it to new emmc the flash it with 4 files (dont use pit or phone will random error ) -- done

https://scontent-sin6-1.xx.fbcdn.net...6d&oe=59091F37

ramrajbhopal 02-26-2017 10:59

SM-J100H Partitioning not detected...
 
​SM-J100H DEAD AFTER FLAH
Partitioning not detected...

---------- eMMC Device Information ----------


EMMC CID : 90014A4834473262110104412CD0222C
EMMC CSD : D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 02/2015 Rev.0x1
EMMC NAME: H4G2b , S/N: 71380176
EMMC NAME (HEX): 48344732622000
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x08] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x08.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: H4G2b _ 71380176_20170226_1439.extcsd
Searching for partition tables...
Partitioning not detected...
Done.

BABAK NURI 02-26-2017 21:16

Hi
as i see in your log ,Your phone is SPD based CPU
I have no idea about this model but i think SPD no show Partitions like MTK
Anyway
Please Write Pit+latest BL via Easy Plus

bast3800 02-26-2017 21:41

Easy jitag can't repair dead boot for J100H

anasshe 02-27-2017 00:30

no
 
Quote:

Originally Posted by bast3800 (Post 12365781)
Easy jitag can't repair dead boot for J100H

u r wrong i done many j1

Code:

---------- eMMC Device Information ----------EMMC CID : 90014A48344732621101C66824096218
EMMC CSD : D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 06/2015 Rev.0x1
EMMC NAME: H4G2b , S/N: 3328713737
EMMC NAME (HEX): 48344732622000
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x08] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x08.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: H4G2b _3328713737_20160823_1755.extcsd
Searching for partition tables...
Detected GPT over MBR...
Warning: Header Size = 512 (expected 92)
Medium UUID: 52444E41-494F-2044-4D4D-43204449534B
Warning: Entries Count = 128
MMCBLK0P0 (SBOOT) Range: [0X400000,0X5FFE00] ,Len: 200000
MMCBLK0P1 (SBOOT2) Range: [0X600000,0X7FFE00] ,Len: 200000
MMCBLK0P2 (WFIXNV1) Range: [0X800000,0X8FFE00] ,Len: 100000
MMCBLK0P3 (WFIXNV2) Range: [0X900000,0X9FFE00] ,Len: 100000
MMCBLK0P4 (TDFIXNV1) Range: [0XA00000,0XAFFE00] ,Len: 100000
MMCBLK0P5 (TDFIXNV2) Range: [0XB00000,0XBFFE00] ,Len: 100000
MMCBLK0P6 (WDSP) Range: [0XC00000,0XFFFE00] ,Len: 400000
MMCBLK0P7 (MODEM) Range: [0X1000000,0X17FFE00] ,Len: 800000
MMCBLK0P8 (MODEM2) Range: [0X1800000,0X1FFFE00] ,Len: 800000
MMCBLK0P9 (TDDSP) Range: [0X2000000,0X23FFE00] ,Len: 400000
MMCBLK0P10 (FOTA_SIG) Range: [0X2400000,0X24FFE00] ,Len: 100000
MMCBLK0P11 (WRUNTIMENV1) Range: [0X2500000,0X25FFE00] ,Len: 100000
MMCBLK0P12 (WRUNTIMENV2) Range: [0X2600000,0X26FFE00] ,Len: 100000
MMCBLK0P13 (TDRUNTIMENV1) Range: [0X2700000,0X27FFE00] ,Len: 100000
MMCBLK0P14 (TDRUNTIMENV2) Range: [0X2800000,0X28FFE00] ,Len: 100000
MMCBLK0P15 (PARAM) Range: [0X2900000,0X2AFFE00] ,Len: 200000
MMCBLK0P16 (EFS) Range: [0X2B00000,0X3EFFE00] ,Len: 1400000
MMCBLK0P17 (PRODNV) Range: [0X3F00000,0X43FFE00] ,Len: 500000
MMCBLK0P18 (RESERVED2) Range: [0X4400000,0X44FFE00] ,Len: 100000
MMCBLK0P19 (KERNEL) Range: [0X4500000,0X54FFE00] ,Len: 1000000
MMCBLK0P20 (RECOVERY) Range: [0X5500000,0X64FFE00] ,Len: 1000000
MMCBLK0P21 (CSC) Range: [0X6500000,0X12CFFE00] ,Len: C800000
MMCBLK0P22 (SYSTEM) Range: [0X12D00000,0X53CFFE00] ,Len: 41000000
MMCBLK0P23 (HIDDEN) Range: [0X53D00000,0X564FFE00] ,Len: 2800000
MMCBLK0P24 (USERDATA) Range: [0X56500000,0XE80FFE00] ,Len: 91C00000
Done...Presets has been updated...

Done.


BABAK NURI 02-27-2017 21:55

Quote:

Originally Posted by bast3800 (Post 12365781)
Easy jitag can't repair dead boot for J100H

Hi
Can you explain me why you think this?


All times are GMT +1. The time now is 20:07.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.21735 seconds with 6 queries

SEO by vBSEO