SAMSUNG SM-A127F Fully Connected And R&W&FRP All Jobs Done By Easy Jtag Plus - GSM-Forum

SeharH · 10-13-2021, 13:51

SAMSUNG SM-A127F Fully Connected And R&W&FRP All Jobs Done By Easy Jtag Plus

Bellow is some task's logs and screenshots

The GT Road Jtager's Team

BR.
SeharH

Masud-Rana · 10-15-2021, 14:53

Isp Pinout Photo ?

johnoroo37 · 02-01-2022, 19:58

Quote:

Originally Posted by seharh

samsung sm-a127f fully connected and r&w&frp all jobs done by easy jtag plus :d:d:d

bellow is some task's logs and screenshots

the gt road jtager's team

br.
Seharh

please dm me or post isp pinout

shooster · 03-10-2022, 09:48

I have proper soldering but im still getting error cmd time error crc error

Cmd pull up levels help me sir

Here*

Z3X EasyJtag Software ver. 3.7.0.20

Loading eMMC GEN2 Firmware... IO: 2200 mV

Box S/N: 41CA0C8A0DD5451C, ,FW Ver.: 02.53

Warning: CMD Pullup Level (190 mV) too low , check cables etc.!

CMD Active Level:213 mV

Box IO Level:2200 mV

CLK Rate:36000 kHz

Bus Width:1bit,SDR

HiPower mode is ON!

Can't init device, Reason: CMD Timeout Error

Done.Setting*

EasyJtag2/ISP_HiPower

Setting bus width to 1 Bit

HiPower mode is ON

Setting frequence to 36 MHz

CMD Pullup Level: 784 mV

CMD Active Level: 1020 mV

Can't init device. Reason: CMD CRC Error

10-13-2021, 13:51	#1 (permalink)
SeharH Product Supporter Join Date: Sep 2017 Location: MH Unlocker Pro Posts: 559 Member: 2753718 Status: Offline Sonork: FB : MH Unlocker Pro Thanks Meter: 811	SAMSUNG SM-A127F Fully Connected And R&W&FRP All Jobs Done By Easy Jtag Plus SAMSUNG SM-A127F Fully Connected And R&W&FRP All Jobs Done By Easy Jtag Plus Bellow is some task's logs and screenshots The GT Road Jtager's Team BR. SeharH

10-15-2021, 14:53	#2 (permalink)
Masud-Rana Insane Poster Join Date: Jan 2018 Posts: 79 Member: 2799768 Status: Offline Thanks Meter: 5	Isp Pinout Photo ?

03-10-2022, 09:48	#4 (permalink)
shooster Freak Poster Join Date: May 2017 Location: Africa, Uganda Posts: 222 Member: 2721034 Status: Offline Thanks Meter: 50	I have proper soldering but im still getting error cmd time error crc error Cmd pull up levels help me sir Here* Z3X EasyJtag Software ver. 3.7.0.20 Loading eMMC GEN2 Firmware... IO: 2200 mV Box S/N: 41CA0C8A0DD5451C, ,FW Ver.: 02.53 Warning: CMD Pullup Level (190 mV) too low , check cables etc.! CMD Active Level:213 mV Box IO Level:2200 mV CLK Rate:36000 kHz Bus Width:1bit,SDR HiPower mode is ON! Can't init device, Reason: CMD Timeout Error Done.Setting* EasyJtag2/ISP_HiPower Setting bus width to 1 Bit HiPower mode is ON Setting frequence to 36 MHz CMD Pullup Level: 784 mV CMD Active Level: 1020 mV Can't init device. Reason: CMD CRC Error