GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Easy-Jtag / Easy-Jtag Plus

Easy-Jtag / Easy-Jtag Plus The official support section. You can ask here your question and get answer regarding using Easy-Jtag / Easy-Jtag Plus.

Reply
 
LinkBack Thread Tools Display Modes
Old 08-12-2016, 12:54   #1 (permalink)
Freak Poster
 
oblio's Avatar
 
Join Date: Mar 2004
Location: Romania
Age: 44
Posts: 409
Member: 59869
Status: Offline
Thanks Meter: 131
Donate money to this user
SanDisk SD5C28B-16G


Hi, any support for SanDisk SD5C28B-16G ?

Phone is WIKO DARKSIDE, flashing is ok but with no change in the phone, same desktop background, same android errors, seems like a "fake" flashing.

Desoldered eMMC, detected like this:

Quote:
EasyJtag Suite ver.: 2.3.0.0 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).
undefined
Android Explorer ver.: 1.0.0.6
eMMC ODIN ver.: 1.0.0.8
Successfully connected to box on COM76
Box S/N: 0A013xxxxxxxxx, ,FW Ver.: 01.55
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.1.0, are OK
Z3X Card Serial : AAE9-F523 , ver: 22
Z3X Card Activation [LG] : NOT ACTIVATED , ACTIVATE NOW
Z3X Card Activation [SAMS] : NOT ACTIVATED , ACTIVATE NOW
Z3X Card Activation [JTAG] : ACTIVATED
Z3X EasyJtag Software ver. 2.3.0.0
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 0A013xxxxxxx ,FW Ver.: 01.55CMD Pullup Level:1546 mV
CMD Active Level:2547 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower mode is off!
---------- eMMC Device Information ----------EMMC CID : 02000053444D30333290FFFFFFFF29BC
EMMC CSD : 8C0F002A015981E9B6D9FC1F8A4040AA
EMMC Manufacturer ID: 0002 , OEM ID: 0000
EMMC Date: 02/2006 Rev.0x90
EMMC NAME: SDM032, S/N: 4294967295
EMMC NAME (HEX): 53444D30333200
EMMC ROM1 (Main User Data) Capacity: 30 MB
EMMC ROM2 (Boot Partition 1) Capacity: 0 kB
EMMC ROM3 (Boot Partition 2) Capacity: 0 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 0 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.0 (MMC 4.0)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x00
Device NOT support partitioning feature
Device cannot have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: SDM032_4294967295_20160812_1410.extcsd
=============================================
Extended CSD rev 1.0 (MMC 4.0)
=============================================
Done.
Any reading operation will fail:
Quote:
Retry Fail!Retry reading adress 0x00000000 (Attempt #5)
Retry Fail!Read Block Failed, Reason: CARD Data FIFO Timeout Error
Done.
Detect regions from eMMC:
Quote:
Data partitions (firmware parts) count is 128 (dec)
mmc_read_blocks(0 , 8 ), Reason: CARD Data FIFO Timeout Error
mmc_read_blocks(1 , 1 ), Reason: CMD CRC Error
mmc_read_blocks(FFFFFE00 > 1E9C000 ), Read address is invalid
Meta partitions (partitions storing partition table) count is 0 (dec)
Partitions are not found!
Erasing eMMC:
Quote:
CMD Pullup Level:2464 mVCMD Active Level:2567 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
Erasing 00020000 bytes from 00000000 ...ROM1Full Verify Enabled!
Verify Erased Block Failed , block #0x00000000
Erase Done.
Any advice?
Thanks!
  Reply With Quote
Old 08-12-2016, 14:15   #2 (permalink)
Freak Poster
 
Join Date: Dec 2011
Location: Damghan Semnan Iran
Age: 28
Posts: 153
Member: 1703595
Status: Offline
Thanks Meter: 57
Your emmc is curropted
And must be changed

Sent from my LG-D855 using Tapatalk
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 23:44.



Powered by Searchlight © 2020 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.16627 seconds with 7 queries

SEO by vBSEO