GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Easy-Jtag / Easy-Jtag Plus (https://forum.gsmhosting.com/vbb/f672/)
-   -   SD Card Unbrick Solution by Easy-JTAG Manual (https://forum.gsmhosting.com/vbb/f672/sd-card-unbrick-solution-easy-jtag-manual-1891346/)

blang 12-11-2014 18:49

SD Card Unbrick Solution by Easy-JTAG Manual
 
EasyJTAG Magic SD Card Tool Operation Manual

Here are the instruction on creating recovery sd-card and boot sd-card to recover bricked Samsung Phones in case your phone got broken.*Before doing this, if your device are detected by usb as Qualcomm HS-USB QDLoader 9008 ( If you device are EXYNOS MCU Based it not need to be detected by USB at all)

Creating MAGIC CARD from ZBIN Image.

1. Download both PIT and ZBIN files for yor phone from support area.
2. Insert clean formatted SD Card in USB SD Card Reader
3. Run EasyJTAG Software and select SD Image Plugin
4. Select ZBIN file for creating recovery card by clicking button
5. Select yur SD card in drives list. And click button.
6. After few seconds magic SD card will be done. Close plugin and remove it from reader


Recovery Phone by SD Unbrick card

1. Insert SD Card in phone SD card slot and attach battery
2. Put phone in Download mode by USB-JIC either by keyboard combination ( make sure that you have used file with newer firmware than current phone firmware. If you don't know what firmware have ben in phone before software damage – just use latest zbin file from support!)
3. If phone go in ODIN mode, download firmware with same version as in ZBIN file e.g if you used
4. Samsung_GT-I9200_I9200XXUDNE4_GPT_UEFI.zbin you should use I9200XXUDNE4 firmware or newer one.
5. Flash phone with ODIN with PIT file!
6. Repair Done;


Creating MAGIC CARD from BIN Dump

If your phone have more actual firmware version than ZBIN file on support or you have unsupported phone – you can make ZBIN file by yourself from BINary dump ( eMMC Direct Dump or ADB Full Dump)


1. Run EasyJTAG Software and select SD Image Plugin
2. Select (128mbt DUMP)BIN* file for creating recovery card by clicking button
3. Click [Convert From BIN] button
4. After operation complete you will get ZBIN and PIT file in source folder.


• Different Platforms requires different ROM parts for Magic SD

DUNIYA JAMAL 12-11-2014 20:05

Sir,
Very good user manual but better you give video manual.

Best Regards

yuvraj9x2 12-11-2014 20:13

but better you give video manual for full process

umargee 12-11-2014 22:27

(128mbt DUMP)BIN* file for need
working phone ??

HaSHaM3001 12-11-2014 22:28

Question
Do I need Use TWEEZER TO SHORT of some dead bodies

iory 12-11-2014 22:44

thnx it good step, i like easy jtag

blang 12-12-2014 00:19

Quote:

Originally Posted by HaSHaM3001 (Post 10731996)
Question
Do I need Use TWEEZER TO SHORT of some dead bodies

yes. need. soon will be added TP pictures in phone folders.

concepttheman 12-12-2014 06:57

Excellent ....feedback, tips..... results..... anyone.?
Problem is, some phones do not boot with the sd card method, unless your doing a tweak. I had a phone that I could only odin with the card in and when I pulled the card, It wouldnt work so I had to stop being lazy and do the jtag chain and presto, no need for sd after the real jtag thing. Now we need a image sharing thread with phones labeled correctly when we post them...

.:MobileLife:. 12-12-2014 07:10

Quote:

Originally Posted by DUNIYA JAMAL (Post 10731835)
Sir,
Very good user manual but better you give video manual.

Best Regards

Bro steps are very easy. I think no need video easy then solder wires.



BR.
Siddeque.

kalitirto 12-12-2014 07:26

nice update.... good work from teamm...

.:MobileLife:. 12-12-2014 08:33

EasyJTAG Magic SD Card Tool Operation Picture Manual for new bees.
 
Creating MAGIC CARD from ZBIN Image.

Step 1 Run Plugin

http://s19.postimg.org/6dngjtigz/image.jpg

Step 2 Browse zbin file

http://s19.postimg.org/6114ar6ir/image.jpg

Step 3 Select SD cared reader

http://s19.postimg.org/8kwr4uu2r/image.jpg

Step 4 Write SD cared

http://s19.postimg.org/groqwfk5f/image.jpg

Magic Cared is ready for boot repair now do these steps.

Recovery Phone by SD Unbrick card

1. Insert SD Card in phone SD card slot and attach battery
2. Put phone in Download mode by USB-JIC either by keyboard combination ( make sure that you have used file with newer firmware than current phone firmware. If you don't know what firmware have ben in phone before software damage – just use latest zbin file from support!)
3. If phone go in ODIN mode, download firmware with same version as in ZBIN file e.g if you used
4. Samsung_GT-I9200_I9200XXUDNE4_GPT_UEFI.zbin you should use I9200XXUDNE4 firmware or newer one.
5. Flash phone with ODIN with PIT file!
6. Repair Done.

Creating MAGIC CARD from BIN Dump

Do step 1 and 2 same as above.

Step 3 and 4.

http://s19.postimg.org/se8uxk7gj/3_4.jpg

http://s19.postimg.org/x3ysm5ygz/Ful...231_PM_bmp.jpg

http://s19.postimg.org/rh2foovyb/Ful...256_PM_bmp.jpg

BR.
Siddeque.

.:MobileLife:. 12-12-2014 08:35

Quote:

Originally Posted by yuvraj9x2 (Post 10731848)
but better you give video manual for full process

This could help for you bro.

http://forum.gsmhosting.com/vbb/f672.../#post10732554

BR.
Siddeque.

dvdaio 12-12-2014 09:49

Phone with product name unkown can fix boss

dvdaio 12-12-2014 09:55

Product name empty can we fix it

.:MobileLife:. 12-12-2014 11:12

Quote:

Originally Posted by dvdaio (Post 10732687)
Phone with product name unkown can fix boss

If hardware would be not fix means if have emmc damage can't be fix any box need to change emmc and most of problem no product name emmc fault.

t

shaka 12-12-2014 14:38

Quote:

Originally Posted by dvdaio (Post 10732697)
Product name empty can we fix it

Damaged EMMC chip. In most cases need replacement.

concepttheman 12-12-2014 16:56

Is there a solution for a gs2 I605 with just a odin tar file? Phone will not boot because of corrupted efs.
Plz answer someone.

blang 12-12-2014 17:00

Quote:

Originally Posted by concepttheman (Post 10733593)
Is there a solution for a gs2 I605 with just a odin tar file? Phone will not boot because of corrupted efs.
Plz answer someone.

if you will provide 512mbt dump we will create rcp for efs flashing.

SD card only for boot repair and flash via odin

concepttheman 12-12-2014 17:24

I can flash in odin but it will stuck at the verizon boot screen. even when I use a pit file, with latest firmware it will not boot..is the only option to replace to emmc? I have no problem reading the phone if you tell me how to do it the problem is I cannot access the JTAG port with the molex cable that I have because there is a piece of metal blocking it for a connection I can get in download mode I just need to be able to refresh the rom.to boot the phone

Dr_Wolodya 12-12-2014 21:55

Quote:

Originally Posted by blang (Post 10731714)
Creating MAGIC CARD from BIN Dump

If your phone have more actual firmware version than ZBIN file on support or you have unsupported phone – you can make ZBIN file by yourself from BINary dump ( eMMC Direct Dump or ADB Full Dump)

What is "adb full dump" and how to make "adb full dump"?

wuyapeng703 12-13-2014 04:03

where are option to download ZBIN file

.:MobileLife:. 12-13-2014 06:24

Quote:

Originally Posted by wuyapeng703 (Post 10734193)
where are option to download ZBIN file

Download from shell.

dvdaio 12-13-2014 21:57

Please first we need steps that work for sure many people did not know what exactly firmware in the phone we need who sucess we need log files we need an results not only steps please

amirjco4 12-13-2014 22:50

in case of i317m we don't have any dump in the world . if your plugin can make SD boot repair from tar file we also glad ;)

manaswb 12-14-2014 06:11

help you
 
when mobile can not show download mode how to work this

.:MobileLife:. 12-14-2014 07:42

Quote:

Originally Posted by manaswb (Post 10736067)
when mobile can not show download mode how to work this

Bro what is the meaning of boot repair?

Means phone is not powering up and not connecting to pc in flashing/downloading mode.

This SD card method would work for software dead phones.

BR.
Siddeque.

ninni_giaca 12-14-2014 21:40

I can reparto product with this procedure??

joel_3mo 12-15-2014 17:33

Quote:

Originally Posted by dvdaio (Post 10735755)
Please first we need steps that work for sure many people did not know what exactly firmware in the phone we need who sucess we need log files we need an results not only steps please

I think there is no log, becouse it's not an operation with pc.
You junt need pc to create the SD boot repair which is very easy (at least it looks :D), and if you don't know firmware version just use the highest you find in support (or create it yoursel with a dump of working phone).

alialjorany 12-15-2014 18:53

ok i tried with 3 phones i9300 and i9500 and i create success sd zbin file and attached bat and put jig in usb port nothing change my question is how long do i have to wait (how long its took the operation ) do i have to Short R313 resistance
if there is a video to show how to it will be prefect

outletcelular 12-16-2014 17:31

No SD detect at plugin yes at My PC

Any solution ?

alialjorany 12-16-2014 18:16

Quote:

Originally Posted by outletcelular (Post 10741507)
No SD detect at plugin yes at My PC

Any solution ?

u have to run EasyJTAG Tool as administrator to see the sd drivers

outletcelular 12-16-2014 19:03

Quote:

Originally Posted by alialjorany (Post 10741597)
u have to run EasyJTAG Tool as administrator to see the sd drivers

Solve whit external SD lector, internal (notebook) no detect

ty

F_X 12-17-2014 19:07

If you're looking for images you might want to check out. http://forum.gsmhosting.com/vbb/f672...-bees-1891488/

subeesh.cp 12-22-2014 06:32

GT-I9300 work with out product name also
 
Quote:

Originally Posted by dvdaio (Post 10732697)
Product name empty can we fix it

After repair phone will power on normally
No need product name

Gambitv01 12-22-2014 07:22

my phone power on but give me invaild odin invalid ext4 image and then it gets stuck at samsung logo?

sumatera 12-22-2014 08:43

Quote:

Originally Posted by Gambitv01 (Post 10751901)
my phone power on but give me invaild odin invalid ext4 image and then it gets stuck at samsung logo?

Just flash with multi file (boot, pda, modem,csc) with PIT.


BR

Gambitv01 12-24-2014 01:10

you have files for that? t999? dl link?
 
Quote:

Originally Posted by sumatera (Post 10752024)
Just flash with multi file (boot, pda, modem,csc) with PIT.


BR

you have files for that? t999?

ALI_MAFIA 12-24-2014 14:02

need sd repair and boot repair file for tab n7500. its urgent .

asco777 12-25-2014 12:27

hello
programcan not detect SD card when plug in PC. what to do

sd usb reader ok and I try both 8 and 16gb sd card

chmsc_ELX 12-29-2014 07:42

galaxy S I9003 dead boot can be repaired by SD card unbrick tool?

saifsalee 12-31-2014 11:06

where is the zbin file how to download that file

janzir 01-11-2015 11:39

Dear supporters, i have 2 questions

1) after creating sd unbrick card, and if usb jig doesn't work, should we short any resistor, or should we use terraterm with serial port to make it happen

2) atf box can creat sd unbrick file for lots of models, using bootloader and pit files (no need dump rom1) , can this tool do the same

Thanks
Br
John


Sent from my iPhone using Tapatalk

ganjbek 01-12-2015 07:17

need manual i9192 tp pictures and video repair boot pls

ganjbek 01-12-2015 07:26

dead phone i9192 need tp pictures and manual help team

ilifante 01-16-2015 19:36

How can i make a .BIN dump from a working phone? Tutorial please?

Aamir_Zia 01-17-2015 10:31

i747 & t999 4.3 needed ..

mobirepair 01-21-2015 12:41

Quote:

Originally Posted by Dr_Wolodya (Post 10733973)
What is "adb full dump" and how to make "adb full dump"?

me too have same question bro..........pls rply frdsssssss

phuocvh™ 01-24-2015 15:51

thanks bro .........

alialjorany 01-25-2015 20:18

until now nobody said about should we use TP or not bcz i create successful zbin in sd card and but it in phone and wait
tried with bat and without
tried with different sd card types and sizes
tried with different time (put sd in the phone )
tried with hand download and gic
cant see download mode

djcvek 01-31-2015 10:16

good post :)


Sent from my Xperia Z Ultra C6833


All times are GMT +1. The time now is 16:35.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2022 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -

Page generated in 0.30017 seconds with 6 queries

SEO by vBSEO