thank you i9200 I need SD Card Repair thank you very much

how to conect sd?frome card reader or from the jtag?becas the software cant detect sd from card reader for me

Anyone have successfully repaired lg g4??????

Lg g4 solution plzzzz very needy

any way tocreat flash file to zbin? mr blang........ i need a700fd 16gb boot repair

help, need image for g530h

It Is very easy to repair just find the cmd tp near emmc in pcb then make the sdc or zbin file using stock rom files like bl then flash the file sd card then put sd card into phone then you need to short cmd tp to go into download mode

hello , is SM-J700H supported in easyjtag SDC-TOOL ? because i dint find the bin or the zbin files for this model , so if it is supported and i can create the bin or zbin for it , can you tell me how to create it?

The same- how to repair SM-J700H/DS?

word first emmc pinout&dump j700h&j700f

http://forum.gsmhosting.com/vbb/f672...j700f-2049045/

Best Of Luck

why easy jtag not recognized connected micro sd?

http://i67.tinypic.com/betzpf.jpg


micro sd is insert:

http://i64.tinypic.com/21eu8lj.jpg

Easy jtag not recognized micro sd

http://i67.tinypic.com/betzpf.jpg


It is inserted into the PC

http://i64.tinypic.com/21eu8lj.jpg


anyone has any suggestions for me? thank

run as Administrator

Nice, it work :D very thank :) :) :)

im new ueser z3x jtag and i create zbin but not download mode my SM-G360f plzzz..any one help me

Wen i try to write micro sd job is done but memory space is all free...is normal?


Inviato dal mio iPhone utilizzando Tapatalk

You need a very good memory card recommended sanddisk 4gb or kingston

Open easy jtag with run as administrator... It will be ok


Sent from my iPhone using Tapatalk

problem to flashing with easytag
 

I have 2 Samsung i8262 in bricked conditions, It makes " Qualcomm HS-USB QDLoader 9008" Port when I press power button. Can I flash it using sd-card? if yes, then please provide me zbin file. I have also tried with jtag but is show this error:
I have tried many times but not done.please help

is 7105h file for sd card magic same as 7102 or 71096 ???? i had sn g71055h in hands with damage boot. thanks

http://www.4shared.com/photo/jLmkQtbEce/i91921.htmlhttp://www.4shared.com/photo/nRx5mgTgba/i9192_dead.htmlhttp://www.4shared.com/photo/nRx5mgTgba/i9192_dead.html

http://www.4shared.com/photo/jLmkQtbEce/i91921.html

Dear Z3x jtag team plz check.i put magic card in samsung i9192 again go odin mode but not flash this phone on z3x jtag.
error is : there is no pit partition .any one suggest me now what i do.......

Br//
Saini

EasyJTAG Magic SD Card Tool Operation Picture Manual for new bees.
 

[IMG]http://i.imgur.com/q4iT1GE.jpg?2[/IMG]

[IMG]http://i.imgur.com/QsDFdiX.jpg?1[/IMG]

:confused: :confused:

Amazing work
Keep it up

i have tested many times this solution 100% works

]
Hello, where I can find support area for Download both PIT and ZBIN files?

Many thanks

Is there any person wit ready sd recovery for j700h

can create zbin from factory firmware coz i need for G531F dead after update

so we need a box to do this ???
I cant lauch the easy jtag . it search the easy jtag box then puffff off
cant run it in admin too !!

Did not succeed sdc fat

Where should put sdc pc or adaptateur z3x

are this work for new models

Where should put sdc pc or adaptateur z3x

223/5000
Hello,

The SD card I could for my GT-I9205 create nevertheless the mobile phone does not start in the ODIN mode. No key combination works. Other SD cards also did not help (2GB, 16GB and 32GB).
What can I do?

mr blang and urjent other web not video i am new usear eazy jtag
1000% sm-g530h dead boot ripear video need
z3x is good team so video need thankssss

you need to click first the read sd card after performing create sd card bro..its work for me :D

Question
 

Question
Do I need Use TWEEZER TO SHORT of some dead bodies

Hi
For Exynos Based Phone YES
For Qualcomm usually NO

how can i create zbin file for samsung gt i9070 if thats file not have in z3x shell

SAMSNUNG N910G sd boot file share plz

Hi
You can creat zbin by eMate tool
Load dump press 'Creat zbin'
but i9070 not supported by sd unbrick
You need JTAG or direct emmc

Hi
I'm not sure i9152 is bcm or qlm
Should be work if is qlm and you use latest bl
But if is bcm you need jtag or direct emmc

i have proplem ill give a pic

https://www.facebook.com/photo.php?f...type=3&theater
any help

https://www.facebook.com/photo.php?f...type=3&theater
any help

Help plz i have sim card for easy jtag witout interface box easy jtag
if possible to run software sd unbrea whitout interface
only whit sim card easy jtag and any reader card beceause my interface dead

please upload sm-N910f Zbin file
not existe in z3x shell

Please i cant find any process of N7505 Exynos Based Phone. as @BABAK NURI said
Quote:
Originally Posted by YOMITOALEJO http://forum.gsmhosting.com/vbb/imag...s/viewpost.gif
Question
Do I need Use TWEEZER TO SHORT of some dead bodies

Hi
For Exynos Based Phone YES
For Qualcomm usually NO

can any one provide N7505 location of resistor to short.

WBR
Yash_npj