SD Card Unbrick Solution by Easy-JTAG Manual

[aman_aks87]

Originally Posted by javed.tak

ADB FULL DUMP command please

adb shel
su
dd if=/dev/block/mmcblk0 of=/sdcard/N7100_Dump.bin bs=1024 count=262144

[aman_aks87]

Originally Posted by blang

EasyJTAG Magic SD Card Tool Operation Manual

Here are the instruction on creating recovery sd-card and boot sd-card to recover bricked Samsung Phones in case your phone got broken.*Before doing this, if your device are detected by usb as Qualcomm HS-USB QDLoader 9008 ( If you device are EXYNOS MCU Based it not need to be detected by USB at all)

Creating MAGIC CARD from ZBIN Image.

1. Download both PIT and ZBIN files for yor phone from support area.
2. Insert clean formatted SD Card in USB SD Card Reader
3. Run EasyJTAG Software and select SD Image Plugin
4. Select ZBIN file for creating recovery card by clicking button
5. Select yur SD card in drives list. And click button.
6. After few seconds magic SD card will be done. Close plugin and remove it from reader


Recovery Phone by SD Unbrick card

1. Insert SD Card in phone SD card slot and attach battery
2. Put phone in Download mode by USB-JIC either by keyboard combination ( make sure that you have used file with newer firmware than current phone firmware. If you don't know what firmware have ben in phone before software damage – just use latest zbin file from support!)
3. If phone go in ODIN mode, download firmware with same version as in ZBIN file e.g if you used
4. Samsung_GT-I9200_I9200XXUDNE4_GPT_UEFI.zbin you should use I9200XXUDNE4 firmware or newer one.
5. Flash phone with ODIN with PIT file!
6. Repair Done;


Creating MAGIC CARD from BIN Dump

If your phone have more actual firmware version than ZBIN file on support or you have unsupported phone – you can make ZBIN file by yourself from BINary dump ( eMMC Direct Dump or ADB Full Dump)


1. Run EasyJTAG Software and select SD Image Plugin
2. Select (128mbt DUMP)BIN* file for creating recovery card by clicking button
3. Click [Convert From BIN] button
4. After operation complete you will get ZBIN and PIT file in source folder.


• Different Platforms requires different ROM parts for Magic SD

SAMSUNG GALAXY NOTE 2 N7100 16GB ( INDIAN MODEL )

history :
=====
last STOCK VERSION:  "N7100XXFUN1_N7100ODDFNI1_INU"

After use custom ROM then unfortunately boot looping ..
 then after client again flash N7100XXFUN1_N7100ODDFNI1_INU
stock file .. this time stuck in flashing process.. 
then after never boot and no sign of life..


we use your process for unbrick ..through SD CARD METHOD...

using ""Samsung_GT-N7100_N7100XXUENA1_SBOOT_4.3_V2.zbin"" this file 
working in phone.


after that, when i am flash through odin using "Samsung_GT-N7100_16G.pit" file 
with "N7100XXUFNL1_N7100ODDFNI1_INU" 
but not flash just stuck in ""PIT FOR MAPPING""

i am also try 4.3 ROM 4.1 ROM but same error..

plz guide how solve this problem ... ?

[concepttheman]

when i try to ake image i get this plz help

[concepttheman]

This is what i get when i try to use this tool!!! help someone
https://drive.google.com/file/d/0B-w...ew?usp=sharing

and this

https://drive.google.com/file/d/0B-w...ew?usp=sharing

please help

[concepttheman]

we spend all this money ansd get scarce support y dont they hire more people!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[concepttheman]

this is the messge i get when i try to format my card. help plz blang someone
https://drive.google.com/file/d/0B-w...ew?usp=sharing

[concepttheman]

and this is the error message
https://drive.google.com/file/d/0B-w...ew?usp=sharing

[concepttheman]

repoting back problem solved.
opened as administartor

[ttechno1985]

N9005 SDC REPAIRE FILE CREATED AND TRY TO BOOT THE PHONE BUT ALWAYS SHOWING LIKE THIS ERROR SHOWING ON FIGUR



I USED

(1) 32GB SANDISCK SD CARD
(2) Samsung_SM-N9005_N9005XXUENC2_GPT_UEFI_4.4.2.zbin -SDC REPAIRE FILE I USED DOWNLOAD FROM SHELL

PLZ HELP ME TO FIX THIS PROBLEM......

[megaponsel]

need file SD card tool for samsung SM-T215... please help....
thx

[kpkgsm]

Excuse me Mr.blang I did nOt understand This Steps


Creating MAGIC CARD from BIN Dump

If your phone have more actual firmware version than ZBIN file on support or you have unsupported phone – you can make ZBIN file by yourself from BINary dump ( eMMC Direct Dump or ADB Full Dump)


1. Run EasyJTAG Software and select SD Image Plugin
2. Select (128mbt DUMP)BIN* file for creating recovery card by clicking button
3. Click [Convert From BIN] button
4. After operation complete you will get ZBIN and PIT file in source folder.


• Different Platforms requires different ROM parts for Magic SD

Kindly Explaing this with pics or make video
we need to have other working phone in hands for doing this or this can be without having working phone can u explain plz kindly reply..

[kpkgsm]

Originally Posted by .:MobileLife:.

Creating MAGIC CARD from ZBIN Image.

Step 1 Run Plugin



Step 2 Browse zbin file



Step 3 Select SD cared reader



Step 4 Write SD cared



Magic Cared is ready for boot repair now do these steps.

Recovery Phone by SD Unbrick card

1. Insert SD Card in phone SD card slot and attach battery
2. Put phone in Download mode by USB-JIC either by keyboard combination ( make sure that you have used file with newer firmware than current phone firmware. If you don't know what firmware have ben in phone before software damage – just use latest zbin file from support!)
3. If phone go in ODIN mode, download firmware with same version as in ZBIN file e.g if you used
4. Samsung_GT-I9200_I9200XXUDNE4_GPT_UEFI.zbin you should use I9200XXUDNE4 firmware or newer one.
5. Flash phone with ODIN with PIT file!
6. Repair Done.

Creating MAGIC CARD from BIN Dump

Do step 1 and 2 same as above.

Step 3 and 4.







BR.
Siddeque.

For this opertation do we need to have other working phone in hands??

[loomingx]

If device goes into sd card mode but doesn't allow me to enter download mode by pressing volume up does this mean that my EMMC is dead or I will need to do EMMC direct? It's a Note 2 i317m and with magic sd card it goes into sd card mode but won't let me go into full download mode by pressing volume up afterwards...

[loomingx]

Step-by-step how to create magic bin file for s4 sgh-i337m if I have another working device and connect to Jtag? What partition do I save and then convert through your awesome tool?

[wasirbilara]

What is magic card plz tell me im new here