05-22-2014, 12:45
|
#1 (permalink)
|
Freak Poster
Join Date: May 2014
Posts: 163
Member: 2186335
Status: Offline
Thanks Meter: 44 | .::sucseefully repair emmc 00000 name thread::. I desided to open this threath to post successful reapir emmc name bye power full emmc tools in marekt I mean easy jtag Quote:
Z3X EasyJtag Software ver. 1.5.0.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 03xxxxxxxxxxxxxxx, ,FW Ver.: 01.50
CMD Pullup Level:1464 mV
CMD Active Level:1876 mV
eMMC Device Information
EMMC CID : 1501003030303030305620110726589C
EMMC CSD : 902701320F5903FFF6DBFFEF8A404022
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2005 Rev.0x56
EMMC NAME: 000000 , S/N: 537986854
EMMC ROM1 (Main User Data) Capacity: 16384 MB
EMMC ROM2 (Boot Partition 1) Capacity: 512 kB
EMMC ROM3 (Boot Partition 2) Capacity: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: 000000_ 537986854_20140404_0440.extcsd
Done.
Running:SAMSUNG: MoviNAND VTU00M Name 0000 Repair...
Z3X EasyJtag Software ver. 1.5.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1464 mV
CMD Active Level:1876 mV
Start EMMC repair:
Entering repair mode 1...
Success
Erasing repair area...
Success
Writing repair area...
Success
Exit repair mode 1...
Success
===================================
Init EMMC...
Success
Entering repair mode 2...
Success
Erasing repair area...
Success
Writing repair area...
Success
Exit repair mode 2...
Reading S.M.A.R.T
Can't init EMMC, Reason: CMD Timeout Error
===================================
Running:SAMSUNG: Read S.M.A.R.T Report...
Z3X EasyJtag Software ver. 1.5.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1464 mV
CMD Active Level:1876 mV
Reading S.M.A.R.T
S.M.A.R.T Ver. 0 , Card Error mode : Normal
Super Block size : 0x00800000 (8388608 bytes)
Super Page size : 0x00004000 (16384 bytes)
Optimal Write size : 0x00010000 (65536 bytes)
Read Reclaim count : 0
Optimal TRIM size : 0x00002000 (8192 bytes)
Total Number of banks : 4
Initial bad blocks per bank : 3,5,2,4
Runtime bad blocks per bank : 0,0,0,1
Reserved blocks left per bank : 48,46,49,47
All Erase counts (min,avg,max): 0,0,1
SLC Erase counts (min,avg,max): 0,0,1
MLC Erase counts (min,avg,max): 0,0,0
S.M.A.R.T Report Done !!!
Z3X EasyJtag Software ver. 1.5.0.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 03xxxxxxxxxxxxxxx, ,FW Ver.: 01.50
CMD Pullup Level:1423 mV
CMD Active Level:1876 mV
eMMC Device Information
EMMC CID : 15010056545530304DF1595973895F46
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2012 Rev.0xf1
EMMC NAME: VTU00M , S/N: 1499034505
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: VTU00M_1499034505_20140404_0442.extcsd
Done.
| more and more emmc will revive soon by Easy Jtag |
| |