t889 Emmc Easy Jtag
 

Hey ,

I have many box and tool including z3x box and Riff but i am interested in purchasing Easy Jtag tool for a job I have. I hope z3x team can read and gives me help.

I have T889 NOTE 2 which will boot into download mode but when i try to flash firmware it gives error and says No Pit File. When I try to install pit file the ODIN fails. To boot phone in normal mode you get white LCD with black static so I believe the problem is EMMC.


Now I have some question I wanted to ask.


Will Easy Jtag and EMMC tool fix this problem?

Will I have to remove EMMC or are their pin out readily available so i can just solder wires?

Will tool repair current EMMC or will I have to change EMMC and use tool to flash new firmware?

Are repair files readily available for this model phone because I check Shell for Z3x box and I do not see any files for this model.

Thank you in advance furious team, I hope your box can help because i am ready to purchase

When in download mode what does " Product Name" say ?

product name is Blank

In that case the only fix is to replace the emmc chip... to the best of my knowledge there is no fix for blank " Product Name" yet

But when i do this wont I have to now flash EMMC or will it come preprogram that i can just use odin file?

Hi , we cannot fix dead hardware.

EasyJTAG able


Repair phone boot over JTAG
Repair phone boot over direct eMMC
Repair NO product name
Repair extCSD/Boot Size in most Samsung eMMC
Repair most semi-dead eMMC cards that go in Operation Condition
Downgrade boot after Android 4.3

Cannot repair eMMC with name 00000 ( at this moment )
Cannot repair eMMC that won't go in Operation Condition