GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Easy-Jtag / Easy-Jtag Plus

Easy-Jtag / Easy-Jtag Plus The official support section. You can ask here your question and get answer regarding using Easy-Jtag / Easy-Jtag Plus.

Reply
 
LinkBack Thread Tools Display Modes
Old 12-11-2020, 11:39   #1 (permalink)
No Life Poster
 
ishant's Avatar
 
Join Date: May 2012
Location: InfinityBox CM2
Posts: 605
Member: 1763238
Status: Offline
Thanks Meter: 366
UFS DUMP read error


@Layder
Sir try to read Dump from Vivo V19 UFS 2.1 but can't read
small LUN partitions read without any problem but when i read big partition error Exmpl 32mb read with error [B]Command sense Medium error [B







]

Found 1 serial devices
COM8 USB\VID_1781&PID_AAAC&REV_0100&MI_00 EasyJTAG Command Port (COM8)
Selected pinout: GEN2 High Speed Pinout
Change EasyJTAG Pinout OK
Z3X EasyJtag Software ver. 3.7.0.20
UFS Socket Info.
Serial: 0123CB98EDF22D27EE
Description: EasyJTAG UFS Socket BGA-254 by EasyJTAG 11.01.20

Identify UFS Chip.
UFS Chip Voltage: Low
VCC: 3244mV
VCCQ2: 1910mV

Chip Info:
Manufacturer: SAMSUNG
ProductName: KM8V8001JM-B813
SerialNumber: 3cc06a19941d
OemID: SAMSUNG_OEM_ID
Firmware Version: 1.6.0.0
UFS Version: 2.1

Maximum Number of LUs: 8
Number of LUs found: 6
LUN 0:
Block size: 0x1000
Size: 0x1D85000000 / 118,080,000,000B / 118GB
LUN 1 (Boot A):
Block size: 0x1000
Size: 0x400000 / 0,004,000,000B / 4MB
LUN 2 (Boot B):
Block size: 0x1000
Size: 0x400000 / 0,004,000,000B / 4MB
LUN 3:
Block size: 0x1000
Size: 0x2000000 / 0,032,000,000B / 32MB
LUN 4:
Block size: 0x1000
Size: 0x40000000 / 1,000,000,000B / 1GB
LUN 5:
Block size: 0x1000
Size: 0x4000000 / 0,064,000,000B / 64MB
Number of W-LUs found: 1
W-LUN 0xC4 (REPORT LUNS):
Block size: 0x100
Size: 0x1000000 / 0,016,000,000B / 16MB
Full size: 0x1DCC800000 / 119,200,000,000B / 119GB

Health:
Device life time method A: 0x01 (0%-10% device life time used)
Device life time method B: 0x01 (0%-10% device life time used)
Pre End of Life: 0x01 (Used less then 80% of reserved blocks)

Checking LU0 for partitioning
The protective MBR's 0xEE partition is oversized! Auto-repairing.
LUN0 Have 17 partitions
The protective MBR's 0xEE partition is oversized! Auto-repairing.
LUN1 Have 2 partitions
The protective MBR's 0xEE partition is oversized! Auto-repairing.
LUN2 Have 2 partitions
The protective MBR's 0xEE partition is oversized! Auto-repairing.
LUN3 Have 3 partitions
The protective MBR's 0xEE partition is oversized! Auto-repairing.
LUN4 Have 30 partitions
The protective MBR's 0xEE partition is oversized! Auto-repairing.
LUN5 Have 5 partitions
------ Detected 59 partitions ------
LUN0 (SSD) [0x6000 0x2000] Size: 8.0KB
LUN0 (PERSIST) [0x8000 0x2000000] Size: 32.0MB
LUN0 (MISC) [0x2008000 0x100000] Size: 1.0MB
LUN0 (KEYSTORE) [0x2108000 0x80000] Size: 512.0KB
LUN0 (FRP) [0x2188000 0x80000] Size: 512.0KB
LUN0 (RECOVERY) [0x2208000 0x6000000] Size: 96.0MB
LUN0 (SURVIVAL) [0x8208000 0x6000000] Size: 96.0MB
LUN0 (VGC) [0xe208000 0xc800000] Size: 200.0MB
LUN0 (OEM) [0x1aa08000 0x4000000] Size: 64.0MB
LUN0 (SEED) [0x1ea08000 0x400000] Size: 4.0MB
LUN0 (APANIC) [0x1ee08000 0xa00000] Size: 10.0MB
LUN0 (BACKUP) [0x1f808000 0xa00000] Size: 10.0MB
LUN0 (RESERVED) [0x20208000 0xa00000] Size: 10.0MB
LUN0 (METADATA) [0x20c08000 0x1000000] Size: 16.0MB
LUN0 (SUPER) [0x21c08000 0x200000000] Size: 8.0GB
LUN0 (CACHE) [0x221c08000 0x10000000] Size: 256.0MB
LUN0 (USERDATA) [0x231c08000 0x1b533f3000] Size: 109.299GB
LUN1 (XBL) [0x6000 0x380000] Size: 3.500MB
LUN1 (XBL_CONFIG) [0x386000 0x20000] Size: 128.0KB
LUN2 (XBLBAK) [0x6000 0x380000] Size: 3.500MB
LUN2 (XBL_CONFIGBAK) [0x386000 0x20000] Size: 128.0KB
LUN3 (ALIGN_TO_128K_1) [0x6000 0x1a000] Size: 104.0KB
LUN3 (CDT) [0x20000 0x20000] Size: 128.0KB
LUN3 (DDR) [0x40000 0x100000] Size: 1.0MB
LUN4 (AOP) [0x6000 0x80000] Size: 512.0KB
LUN4 (TZ) [0x86000 0x200000] Size: 2.0MB
LUN4 (HYP) [0x286000 0x80000] Size: 512.0KB
LUN4 (MODEM) [0x306000 0x10000000] Size: 256.0MB
LUN4 (BLUETOOTH) [0x10306000 0x100000] Size: 1.0MB
LUN4 (ABL) [0x10406000 0x4000000] Size: 64.0MB
LUN4 (DSP) [0x14406000 0x2000000] Size: 32.0MB
LUN4 (KEYMASTER) [0x16406000 0x80000] Size: 512.0KB
LUN4 (BOOT) [0x16486000 0x6000000] Size: 96.0MB
LUN4 (CMNLIB) [0x1c486000 0x80000] Size: 512.0KB
LUN4 (CMNLIB64) [0x1c506000 0x80000] Size: 512.0KB
LUN4 (DEVCFG) [0x1c586000 0x20000] Size: 128.0KB
LUN4 (QUPFW) [0x1c5a6000 0x10000] Size: 64.0KB
LUN4 (VBMETA_SYSTEM) [0x1c5b6000 0x10000] Size: 64.0KB
LUN4 (VBMETA) [0x1c5c6000 0x10000] Size: 64.0KB
LUN4 (DTBO) [0x1c5d6000 0x1800000] Size: 24.0MB
LUN4 (STORSEC) [0x1ddd6000 0x20000] Size: 128.0KB
LUN4 (SEC) [0x1ddf6000 0x4000] Size: 16.0KB
LUN4 (DEVINFO) [0x1ddfa000 0x1000000] Size: 16.0MB
LUN4 (DIP) [0x1edfa000 0x100000] Size: 1.0MB
LUN4 (APDP) [0x1eefa000 0x40000] Size: 256.0KB
LUN4 (MSADP) [0x1ef3a000 0x40000] Size: 256.0KB
LUN4 (SPUNVM) [0x1ef7a000 0x800000] Size: 8.0MB
LUN4 (DPO) [0x1f77a000 0x1000] Size: 4.0KB
LUN4 (SPLASH) [0x1f77b000 0x20a4000] Size: 32.640MB
LUN4 (LIMITS) [0x2181f000 0x1000] Size: 4.0KB
LUN4 (TOOLSFV) [0x21820000 0x100000] Size: 1.0MB
LUN4 (LOGFS) [0x21920000 0x800000] Size: 8.0MB
LUN4 (RAWDUMP) [0x22120000 0x8000000] Size: 128.0MB
LUN4 (LOGDUMP) [0x2a120000 0x4000000] Size: 64.0MB
LUN5 (ALIGN_TO_128K_2) [0x6000 0x1a000] Size: 104.0KB
LUN5 (MODEMST1) [0x20000 0x200000] Size: 2.0MB
LUN5 (MODEMST2) [0x220000 0x200000] Size: 2.0MB
LUN5 (FSG) [0x420000 0x200000] Size: 2.0MB
LUN5 (FSC) [0x620000 0x20000] Size: 128.0KB
------------------------------------
Read SYSTEM from LUN0.
The protective MBR's 0xEE partition is oversized! Auto-repairing.
------ Android information ------
Detected LINUX(Android) SUPER : 0x0021C08000 (8.0GB)
Unable to mount SYSTEM , code : 95
---------------------------------------------
Read USERDATA from LUN0.
The protective MBR's 0xEE partition is oversized! Auto-repairing.
Detected USERDATA USERDATA : 0x0231C08000 (109.299GB)
Unable to mount USERDATA , code : 95
Userdata Superblock contents::
78DD6906 480E0000 38990306 DE282201 5CABF60B A9117276 28A10606 20470106 xi.H...8...(".\..rv(.. G..;
BCACF60B 08AFF60B 5CA10606 08AFF60B 78DD6906 480E0000 28A10606 5ADF5101 ...\....xi.H...(..ZQ.;
78DD6906 104C4E01 34367D01 90ABF60B 00000000 A9117276 28A10606 10A25101 xi..LN.46}........rv(...Q.;
E5030000 B0AFF60B 5CA10606 B0AFF60B 78DD6906 480E0000 28A10606 5ADF5101 ....\...xi.H...(..ZQ.;
78DD6906 480E0000 E5030000 5ADF5101 00000000 A9117276 28A10606 10A25101 xi.H......ZQ......rv(...Q.;
E5030000 A9117276 E5030000 A8A15101 E5030000 E5030000 38990306 C6A9DF00 ....rv...Q.......8...Ʃ.;
00000000 A9117276 28ACF60B E8ACF60B 481F7906 90B0F60B 5CA10606 90B0F60B .....rv(..H.y...\....;
78DD6906 480E0000 28A10606 5ADF5101 78DD6906 480E0000 E5030000 5ADF5101 xi.H...(..ZQ.xi.H......ZQ.;
Done.

Z3X EasyJtag Software ver. 3.7.0.20
UFS Socket Info.
Serial: 0123CB98EDF22D27EE
Description: EasyJTAG UFS Socket BGA-254 by EasyJTAG 11.01.20

Identify UFS Chip.
UFS Chip Voltage: Low
VCC: 3220mV
VCCQ2: 1909mV

Chip Info:
Manufacturer: SAMSUNG
ProductName: KM8V8001JM-B813
SerialNumber: 3cc06a19941d
OemID: SAMSUNG_OEM_ID
Firmware Version: 1.6.0.0
UFS Version: 2.1

Maximum Number of LUs: 8
Number of LUs found: 6
LUN 0:
Block size: 0x1000
Size: 0x1D85000000 / 118,080,000,000B / 118GB
LUN 1 (Boot A):
Block size: 0x1000
Size: 0x400000 / 0,004,000,000B / 4MB
LUN 2 (Boot B):
Block size: 0x1000
Size: 0x400000 / 0,004,000,000B / 4MB
LUN 3:
Block size: 0x1000
Size: 0x2000000 / 0,032,000,000B / 32MB
LUN 4:
Block size: 0x1000
Size: 0x40000000 / 1,000,000,000B / 1GB
LUN 5:
Block size: 0x1000
Size: 0x4000000 / 0,064,000,000B / 64MB
Number of W-LUs found: 1
W-LUN 0xC4 (REPORT LUNS):
Block size: 0x100
Size: 0x1000000 / 0,016,000,000B / 16MB
Full size: 0x1DCC800000 / 119,200,000,000B / 119GB

Health:
Device life time method A: 0x01 (0%-10% device life time used)
Device life time method B: 0x01 (0%-10% device life time used)
Pre End of Life: 0x01 (Used less then 80% of reserved blocks)

Check GPT Table
The protective MBR's 0xEE partition is oversized! Auto-repairing.
Found valid GPT with protective MBR; using GPT.

Read UFS LUN0, Address: 0x0 ,Length: 0x231C08000
Output file :E:\UFS_KM8V8001JM-B813_3cc06a19941d_LU0_0x0_0x231c08000.bin
Start
Can't read address 0x800000, Code: -403, Reason: UAP SCSI: Command sense: MEDIUM_ERROR
Read, time taken: 2 sec. Average Reading Speed: 3514 kB/s
Done with errors, check log
Done.

Last edited by ishant; 12-11-2020 at 11:49.
  Reply With Quote
Old 12-11-2020, 13:55   #2 (permalink)
Product Supporter
 
layder's Avatar
 
Join Date: Jun 2002
Location: Belarus
Age: 44
Posts: 3,009
Member: 13148
Status: Offline
Thanks Meter: 2,597
Quote:
Originally Posted by ishant View Post
@Layder
Sir try to read Dump from Vivo V19 UFS 2.1 but can't read
small LUN partitions read without any problem but when i read big partition error Exmpl 32mb read with error [B]Command sense Medium error [B


Chip Info:
Manufacturer: SAMSUNG
ProductName: KM8V8001JM-B813
SerialNumber: 3cc06a19941d
OemID: SAMSUNG_OEM_ID
Firmware Version: 1.6.0.0
UFS Version: 2.1

Read UFS LUN0, Address: 0x0 ,Length: 0x231C08000
Output file :E:\UFS_KM8V8001JM-B813_3cc06a19941d_LU0_0x0_0x231c08000.bin
Start
Can't read address 0x800000, Code: -403, Reason: UAP SCSI: Command sense: MEDIUM_ERROR
Read, time taken: 2 sec. Average Reading Speed: 3514 kB/s
Done with errors, check log
Done.
At some boxes new BGA254 Samsung chip wotk with bad stability
Try this solution: https://forum.gsmhosting.com/vbb/f67...ution-2923071/
  Reply With Quote
The Following User Says Thank You to layder For This Useful Post:
Old 12-12-2020, 19:44   #3 (permalink)
No Life Poster
 
ishant's Avatar
 
Join Date: May 2012
Location: InfinityBox CM2
Posts: 605
Member: 1763238
Status: Offline
Thanks Meter: 366
sir change all 8 resistor 22 ohm but result same


Can't read address 0x800000, Code: -403, Reason: UAP SCSI: Command sense: MEDIUM_ERROR


AND HERE IS EFM RESULT


12.12.2020 16:46:57> UFS: Socket Info:
12.12.2020 16:46:57> S/N: 0x0123CB98EDF22D27EE
12.12.2020 16:46:57> Desc: EasyJTAG UFS Socket BGA-254 by EasyJTAG 11.01.20
12.12.2020 16:46:57> Type: EasyJtag UFS Socket BGA-254
12.12.2020 16:46:57> ID: 1345
12.12.2020 16:46:57>
12.12.2020 16:46:57> UFS: Voltage Info:
12.12.2020 16:46:57> Mode: LOW
12.12.2020 16:46:57> VCC : 3240 mV, VCCQ2: 1910 mV
12.12.2020 16:46:57> 3v3 : 3287 mV, 1v2: 1208 mV
12.12.2020 16:46:57>
12.12.2020 16:46:57> UFS: Memory Info:
12.12.2020 16:46:57> Connection: UNKNOWN SOCKET TYPE
12.12.2020 16:46:57> Vendor: SAMSUNG
12.12.2020 16:46:57> Name: KM8V8001JM-B813
12.12.2020 16:46:57> S/N: 3cc06a19941d
12.12.2020 16:46:57> OEM ID: SAMSUNG_OEM_ID
12.12.2020 16:46:57> Firm Version: 1.6.0.0
12.12.2020 16:46:57> UFS Version: 2.1
12.12.2020 16:46:57> Size: 0x001DCC800000/119.20 GB
12.12.2020 16:46:57> Max LUNs: 8
12.12.2020 16:46:57> LUNs Cnt: 6
12.12.2020 16:46:57> W-LUNs Cnt: 1
12.12.2020 16:46:57> LUNs ReConfig: Enabled
12.12.2020 16:46:57>
12.12.2020 16:46:57> UFS Health Info:
12.12.2020 16:46:57> UFS Life Time A: 0x01 - 0% - 10% Life Time Used
12.12.2020 16:46:57> UFS Life Time B: 0x01 - 0% - 10% Life Time Used
12.12.2020 16:46:57> UFS Pre-EOL Info: 0x01 - Used Less 80% of Reserved Blocks
12.12.2020 16:46:57>
12.12.2020 16:46:57> UFS: LUNs Info:
12.12.2020 16:46:57> LUN 0 - Size: 30953472 Block(s)/118.08 GB
12.12.2020 16:46:57> LUN 1 (Boot A) - Size: 1024 Block(s)/4.00 MB
12.12.2020 16:46:57> LUN 2 (Boot B) - Size: 1024 Block(s)/4.00 MB
12.12.2020 16:46:57> LUN 3 - Size: 8192 Block(s)/32.00 MB
12.12.2020 16:46:57> LUN 4 - Size: 262144 Block(s)/1.00 GB
12.12.2020 16:46:57> LUN 5 - Size: 16384 Block(s)/64.00 MB
12.12.2020 16:46:57> W-LUN 0xC4 (REPORT LUNS) - Size: 65536 Block(s)/16.00 MB
12.12.2020 16:46:57>
12.12.2020 16:46:57> UFS Init OK
12.12.2020 16:46:57> Scanning Data From UFS Chip. Please wait..
12.12.2020 16:46:57>
12.12.2020 16:46:57> Scanning GUID Partition Table from LUN 0
12.12.2020 16:46:57> GUID Partition Table is Found. Max Parts: 32
12.12.2020 16:46:57> GPT: GPT [000000000000 - 000000006000] Size: 24.00 KB
12.12.2020 16:46:57> GPT: SSD [000000006000 - 000000002000] Size: 8.00 KB
12.12.2020 16:46:57> GPT: PERSIST [000000008000 - 000002000000] Size: 32.00 MB
12.12.2020 16:46:57> GPT: MISC [000002008000 - 000000100000] Size: 1.00 MB
12.12.2020 16:46:57> GPT: KEYSTORE [000002108000 - 000000080000] Size: 512.00 KB
12.12.2020 16:46:57> GPT: FRP [000002188000 - 000000080000] Size: 512.00 KB
12.12.2020 16:46:57> GPT: RECOVERY [000002208000 - 000006000000] Size: 96.00 MB
12.12.2020 16:46:57> GPT: SURVIVAL [000008208000 - 000006000000] Size: 96.00 MB
12.12.2020 16:46:58> GPT: VGC [00000E208000 - 00000C800000] Size: 200.00 MB
12.12.2020 16:46:58> GPT: OEM [00001AA08000 - 000004000000] Size: 64.00 MB
12.12.2020 16:46:58> GPT: SEED [00001EA08000 - 000000400000] Size: 4.00 MB
12.12.2020 16:46:58> GPT: APANIC [00001EE08000 - 000000A00000] Size: 10.00 MB
12.12.2020 16:46:58> GPT: BACKUP [00001F808000 - 000000A00000] Size: 10.00 MB
12.12.2020 16:46:58> GPT: RESERVED [000020208000 - 000000A00000] Size: 10.00 MB
12.12.2020 16:46:58> GPT: METADATA [000020C08000 - 000001000000] Size: 16.00 MB
12.12.2020 16:46:58> GPT: SUPER [000021C08000 - 000200000000] Size: 8.00 GB
12.12.2020 16:46:58> GPT: CACHE [000221C08000 - 000010000000] Size: 256.00 MB
12.12.2020 16:46:58> GPT: USERDATA [000231C08000 - 001B533F3000] Size: 109.30 GB
12.12.2020 16:46:58> GPT: BACKUP_GPT [001D84FFB000 - 000000005000] Size: 20.00 KB
12.12.2020 16:46:58> Reading Table Completed
12.12.2020 16:46:58> Scanning GUID Partition Table from LUN 1
12.12.2020 16:46:58> GUID Partition Table is Found. Max Parts: 32
12.12.2020 16:46:58> GPT: GPT [000000000000 - 000000006000] Size: 24.00 KB
12.12.2020 16:46:58> GPT: XBL [000000006000 - 000000380000] Size: 3.50 MB
12.12.2020 16:46:58> GPT: XBL_CONFIG [000000386000 - 000000020000] Size: 128.00 KB
12.12.2020 16:46:58> GPT: LAST_PARTI [0000003A6000 - 000000055000] Size: 340.00 KB
12.12.2020 16:46:58> GPT: BACKUP_GPT [0000003FB000 - 000000005000] Size: 20.00 KB
12.12.2020 16:46:58> Reading Table Completed
12.12.2020 16:46:58> Scanning GUID Partition Table from LUN 2
12.12.2020 16:46:58> GUID Partition Table is Found. Max Parts: 32
12.12.2020 16:46:58> GPT: GPT [000000000000 - 000000006000] Size: 24.00 KB
12.12.2020 16:46:58> GPT: XBLBAK [000000006000 - 000000380000] Size: 3.50 MB
12.12.2020 16:46:58> GPT: XBL_CONFIGBAK [000000386000 - 000000020000] Size: 128.00 KB
12.12.2020 16:46:58> GPT: LAST_PARTI [0000003A6000 - 000000055000] Size: 340.00 KB
12.12.2020 16:46:58> GPT: BACKUP_GPT [0000003FB000 - 000000005000] Size: 20.00 KB
12.12.2020 16:46:58> Reading Table Completed
12.12.2020 16:46:58> Scanning GUID Partition Table from LUN 3
12.12.2020 16:46:58> GUID Partition Table is Found. Max Parts: 32
12.12.2020 16:46:58> GPT: GPT [000000000000 - 000000006000] Size: 24.00 KB
12.12.2020 16:46:58> GPT: ALIGN_TO_128K_1 [000000006000 - 00000001A000] Size: 104.00 KB
12.12.2020 16:46:58> GPT: CDT [000000020000 - 000000020000] Size: 128.00 KB
12.12.2020 16:46:58> GPT: DDR [000000040000 - 000000100000] Size: 1.00 MB
12.12.2020 16:46:58> GPT: LAST_PARTI [000000140000 - 000001EBB000] Size: 30.73 MB
12.12.2020 16:46:58> GPT: BACKUP_GPT [000001FFB000 - 000000005000] Size: 20.00 KB
12.12.2020 16:46:58> Reading Table Completed
12.12.2020 16:46:58> Scanning GUID Partition Table from LUN 4
12.12.2020 16:46:59> GUID Partition Table is Found. Max Parts: 32
12.12.2020 16:46:59> GPT: GPT [000000000000 - 000000006000] Size: 24.00 KB
12.12.2020 16:46:59> GPT: AOP [000000006000 - 000000080000] Size: 512.00 KB
12.12.2020 16:46:59> GPT: TZ [000000086000 - 000000200000] Size: 2.00 MB
12.12.2020 16:46:59> GPT: HYP [000000286000 - 000000080000] Size: 512.00 KB
12.12.2020 16:46:59> GPT: MODEM [000000306000 - 000010000000] Size: 256.00 MB
12.12.2020 16:46:59> GPT: BLUETOOTH [000010306000 - 000000100000] Size: 1.00 MB
12.12.2020 16:46:59> GPT: ABL [000010406000 - 000004000000] Size: 64.00 MB
12.12.2020 16:46:59> GPT: DSP [000014406000 - 000002000000] Size: 32.00 MB
12.12.2020 16:46:59> GPT: KEYMASTER [000016406000 - 000000080000] Size: 512.00 KB
12.12.2020 16:46:59> GPT: BOOT [000016486000 - 000006000000] Size: 96.00 MB
12.12.2020 16:46:59> GPT: CMNLIB [00001C486000 - 000000080000] Size: 512.00 KB
12.12.2020 16:46:59> GPT: CMNLIB64 [00001C506000 - 000000080000] Size: 512.00 KB
12.12.2020 16:46:59> GPT: DEVCFG [00001C586000 - 000000020000] Size: 128.00 KB
12.12.2020 16:46:59> GPT: QUPFW [00001C5A6000 - 000000010000] Size: 64.00 KB
12.12.2020 16:46:59> GPT: VBMETA_SYSTEM [00001C5B6000 - 000000010000] Size: 64.00 KB
12.12.2020 16:46:59> GPT: VBMETA [00001C5C6000 - 000000010000] Size: 64.00 KB
12.12.2020 16:46:59> GPT: DTBO [00001C5D6000 - 000001800000] Size: 24.00 MB
12.12.2020 16:46:59> GPT: STORSEC [00001DDD6000 - 000000020000] Size: 128.00 KB
12.12.2020 16:46:59> GPT: SEC [00001DDF6000 - 000000004000] Size: 16.00 KB
12.12.2020 16:46:59> GPT: DEVINFO [00001DDFA000 - 000001000000] Size: 16.00 MB
12.12.2020 16:46:59> GPT: DIP [00001EDFA000 - 000000100000] Size: 1.00 MB
12.12.2020 16:46:59> GPT: APDP [00001EEFA000 - 000000040000] Size: 256.00 KB
12.12.2020 16:46:59> GPT: MSADP [00001EF3A000 - 000000040000] Size: 256.00 KB
12.12.2020 16:46:59> GPT: SPUNVM [00001EF7A000 - 000000800000] Size: 8.00 MB
12.12.2020 16:46:59> GPT: DPO [00001F77A000 - 000000001000] Size: 4.00 KB
12.12.2020 16:46:59> GPT: SPLASH [00001F77B000 - 0000020A4000] Size: 32.64 MB
12.12.2020 16:46:59> GPT: LIMITS [00002181F000 - 000000001000] Size: 4.00 KB
12.12.2020 16:46:59> GPT: TOOLSFV [000021820000 - 000000100000] Size: 1.00 MB
12.12.2020 16:46:59> GPT: LOGFS [000021920000 - 000000800000] Size: 8.00 MB
12.12.2020 16:46:59> GPT: RAWDUMP [000022120000 - 000008000000] Size: 128.00 MB
12.12.2020 16:46:59> GPT: LOGDUMP [00002A120000 - 000004000000] Size: 64.00 MB
12.12.2020 16:46:59> GPT: LAST_PARTI [00002E120000 - 000011EDB000] Size: 286.86 MB
12.12.2020 16:46:59> GPT: BACKUP_GPT [00003FFFB000 - 000000005000] Size: 20.00 KB
12.12.2020 16:46:59> Reading Table Completed
12.12.2020 16:46:59> Scanning GUID Partition Table from LUN 5
12.12.2020 16:46:59> GUID Partition Table is Found. Max Parts: 32
12.12.2020 16:46:59> GPT: GPT [000000000000 - 000000006000] Size: 24.00 KB
12.12.2020 16:46:59> GPT: ALIGN_TO_128K_2 [000000006000 - 00000001A000] Size: 104.00 KB
12.12.2020 16:46:59> GPT: MODEMST1 [000000020000 - 000000200000] Size: 2.00 MB
12.12.2020 16:46:59> GPT: MODEMST2 [000000220000 - 000000200000] Size: 2.00 MB
12.12.2020 16:46:59> GPT: FSG [000000420000 - 000000200000] Size: 2.00 MB
12.12.2020 16:46:59> GPT: FSC [000000620000 - 000000020000] Size: 128.00 KB
12.12.2020 16:46:59> GPT: LAST_PARTI [000000640000 - 0000039BB000] Size: 57.73 MB
12.12.2020 16:46:59> GPT: BACKUP_GPT [000003FFB000 - 000000005000] Size: 20.00 KB
12.12.2020 16:46:59> Reading Table Completed
12.12.2020 16:46:59>
12.12.2020 16:46:59> Partition #4 mount as [/mnt/vendor/persist] - 32.00 MB
12.12.2020 16:47:00> Partition #10 mount as [/vgc] - 200.00 MB
12.12.2020 16:47:00> Partition #11 mount as [/oem] - 64.00 MB
12.12.2020 16:47:00> Partition #16 mount as [/dev_16] - 16.00 MB
12.12.2020 16:47:00> Partition #18 mount as [/cache] - 256.00 MB
12.12.2020 16:47:00> Partition #19 mount as [/USERDATA] - 109.30 GB
12.12.2020 16:47:01> Partition #45 mount as [/MODEM] - 256.00 MB
12.12.2020 16:47:01> Partition #46 mount as [/BLUETOOTH] - 1.00 MB
12.12.2020 16:47:01> Partition #48 mount as [/dev_48] - 32.00 MB
12.12.2020 16:47:02> Partition #69 mount as [/LOGFS] - 8.00 MB
12.12.2020 16:47:05>
12.12.2020 16:47:05> EmptyCheck:
12.12.2020 16:47:05> EMPTY - #2 - [SSD]
12.12.2020 16:47:05> EMPTY - #5 - [KEYSTORE]
12.12.2020 16:47:06> EMPTY - #6 - [FRP]
12.12.2020 16:47:06> EMPTY - #11 - [SEED]
12.12.2020 16:47:06> EMPTY - #12 - [APANIC]
12.12.2020 16:47:06> EMPTY - #14 - [RESERVED]
12.12.2020 16:47:07> EMPTY - #24 - [LAST_PARTI]
12.12.2020 16:47:07> EMPTY - #30 - [LAST_PARTI]
12.12.2020 16:47:07> EMPTY - #34 - [ALIGN_TO_128K_1]
12.12.2020 16:47:07> EMPTY - #35 - [CDT]
12.12.2020 16:47:07> EMPTY - #37 - [LAST_PARTI]
12.12.2020 16:47:08> EMPTY - #60 - [DIP]
12.12.2020 16:47:09> EMPTY - #61 - [APDP]
12.12.2020 16:47:09> EMPTY - #62 - [MSADP]
12.12.2020 16:47:09> EMPTY - #63 - [SPUNVM]
12.12.2020 16:47:09> EMPTY - #64 - [DPO]
12.12.2020 16:47:09> EMPTY - #65 - [SPLASH]
12.12.2020 16:47:09> EMPTY - #66 - [LIMITS]
12.12.2020 16:47:09> EMPTY - #67 - [TOOLSFV]
12.12.2020 16:47:09> EMPTY - #69 - [RAWDUMP]
12.12.2020 16:47:10> EMPTY - #70 - [LOGDUMP]
12.12.2020 16:47:10> EMPTY - #71 - [LAST_PARTI]
12.12.2020 16:47:10> EMPTY - #75 - [ALIGN_TO_128K_2]
12.12.2020 16:47:10> EMPTY - #79 - [FSC]
12.12.2020 16:47:10> EMPTY - #80 - [LAST_PARTI]
12.12.2020 16:47:10> EmptyCheck: Done
12.12.2020 16:47:17>
12.12.2020 16:47:17> Android Info:
12.12.2020 16:47:17> Device = 1933
12.12.2020 16:47:20>
12.12.2020 16:47:20> Scanner Thread Terminated
12.12.2020 16:47:20> Elapsed: 00:00:37:395
12.12.2020 16:47:20> Found 82 Partition(s)..
12.12.2020 16:47:20> Scan Done. Init Main Engine...
12.12.2020 16:47:20>
12.12.2020 16:47:20> Use EasyJtag UFS Device: KM8V8001JM-B813
12.12.2020 16:47:20>
12.12.2020 16:47:20> Reader Engine Initialized.. 0/OK
12.12.2020 16:47:20> Source: EasyJtag Port [UFS]
12.12.2020 16:47:20> Power Mode: LOW
12.12.2020 16:47:20> Generation: GPT [QC/SAMS/BCM/INTEL/MTK]
12.12.2020 16:47:20> Config: 1011111111101111
12.12.2020 16:47:20> Operation Done: [Init Engine], Elapsed: 00:00:00:047
12.12.2020 16:47:20>
12.12.2020 16:48:46> Multi Read Partitons:
12.12.2020 16:48:46> Path: E:\vivo v19\
12.12.2020 16:48:46> Initializing Reader Engine..
12.12.2020 16:48:46>
12.12.2020 16:48:46> Part Name: 'GPT_LAYOUT_LUN0'
12.12.2020 16:48:46> LUN: 0, Addr: 0x000000000000, Size: 24.00 KB
12.12.2020 16:48:46> Reading Partition..
12.12.2020 16:48:46> Read Done. Count: 6
12.12.2020 16:48:46>
12.12.2020 16:48:46> Part Name: 'PERSIST'
12.12.2020 16:48:46> LUN: 0, Addr: 0x000000008000, Size: 32.00 MB
12.12.2020 16:48:46> Reading Partition..
12.12.2020 16:48:48>
12.12.2020 16:48:48> Error Reading Sector: 2056, Count: 256, Err: -403/ERROR_UFS_CHIP_HWPART_JEDEC_PSREQ
12.12.2020 16:48:48> Try Again #1
12.12.2020 16:48:49>
12.12.2020 16:48:49> Error Reading Sector: 2056, Count: 256, Err: -403/ERROR_UFS_CHIP_HWPART_JEDEC_PSREQ
12.12.2020 16:48:49> Try Again #2
12.12.2020 16:48:49>
12.12.2020 16:48:49> Error Reading Sector: 2056, Count: 256, Err: -403/ERROR_UFS_CHIP_HWPART_JEDEC_PSREQ
12.12.2020 16:48:49> Try Again #3
12.12.2020 16:48:49>
12.12.2020 16:48:49> Too Many Errors. Stopped. Err: -403/ERROR_UFS_CHIP_HWPART_JEDEC_PSREQ
12.12.2020 16:48:49> Error While Erasing Data. Break..
12.12.2020 16:48:49> Error Code: -403
12.12.2020 16:48:49> Read Fail. Break..
12.12.2020 16:48:49>
12.12.2020 16:48:49> Read Done..
12.12.2020 16:48:49> Total Readed Partitions: 2
12.12.2020 16:48:49> Total Readed Files Size: 0x000000806000 Bytes/8.02 MB
12.12.2020 16:48:49> Path: E:\vivo v19\
12.12.2020 16:48:49> Operation Done: [Read Partitions], Elapsed: 00:00:02:996
12.12.2020 16:48:49>
  Reply With Quote
Old 12-13-2020, 16:39   #4 (permalink)
Product Supporter
 
layder's Avatar
 
Join Date: Jun 2002
Location: Belarus
Age: 44
Posts: 3,009
Member: 13148
Status: Offline
Thanks Meter: 2,597
Quote:
Originally Posted by ishant View Post
sir change all 8 resistor 22 ohm but result same


Can't read address 0x800000, Code: -403, Reason: UAP SCSI: Command sense: MEDIUM_ERROR
if problem not solved - it's a problem with read
ufs chip CRC and data not valid
it'a most problem with QLC and TLC memory - data at cells is destoyed

this cell can be readed and work normally after erase it or write
but current data can't readed

usually this problem comes from the chip when id de-soldering
  Reply With Quote
The Following User Says Thank You to layder For This Useful Post:
Old 12-14-2020, 11:47   #5 (permalink)
No Life Poster
 
ishant's Avatar
 
Join Date: May 2012
Location: InfinityBox CM2
Posts: 605
Member: 1763238
Status: Offline
Thanks Meter: 366
Ok sir
Can i flash with efm split firmware ?

Now mobile status when i power on direct goes fastboot mode
  Reply With Quote
Old 12-14-2020, 13:10   #6 (permalink)
Product Supporter
 
layder's Avatar
 
Join Date: Jun 2002
Location: Belarus
Age: 44
Posts: 3,009
Member: 13148
Status: Offline
Thanks Meter: 2,597
Quote:
Originally Posted by ishant View Post
Ok sir
Can i flash with efm split firmware ?

Now mobile status when i power on direct goes fastboot mode
Why not? Try to flash
  Reply With Quote
The Following User Says Thank You to layder For This Useful Post:
Old 12-14-2020, 17:35   #7 (permalink)
No Life Poster
 
ishant's Avatar
 
Join Date: May 2012
Location: InfinityBox CM2
Posts: 605
Member: 1763238
Status: Offline
Thanks Meter: 366
done my vivo v19 write firmware by efm


https://imgur.com/a/FaQn86B
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 23:09.



Powered by Searchlight © 2021 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.23975 seconds with 7 queries

SEO by vBSEO