UFS memory connection troubles, question, discuss thread
 

UFS memory at test

https://i.postimg.cc/V6v1nbm4/photo5...6533359217.jpg

Reading/Writing by partitions

https://i.postimg.cc/xTT7CSjy/photo5...6533359226.jpg

is not a beta test - it's development screenshot.

ufs memory do not have bus width as eMMC
combobox values will be chanded after

I post this screens at me channel
https://t.me/Z3X_EasyJTAG_Plus

Not ned to be forward it to forum

Here is my log, i read a BGA95 from galaxy s6 edge ;)

https://i596.photobucket.com/albums/...604_125148.jpg


https://i596.photobucket.com/albums/...604_125159.jpg

Ufs 153 chipset read & write speed!!!!!!
 

I BUY UFS 153 ADAPTOR YESTERDAY
NOW MY BOX READ AND WIRTE OPERATION ARE ABOUT 500 KB/s

IS IT NORMAL FOR UFS CHIPSET?????

ITS VERY SLOWLY

its 2.5 MBPS On Moorc 3 in 1 UFS Socket

Realy???????

I have easy jtag orginal adaptor

where is problam

Ufs lun size and count
 

HOW WE CAN CHANGE UFS LUN's SIZE AND GRAET THEM?????

I HAVE U ULTRA DUMP WITH THAT LOGS:


LUN 0:
Block size: 0x1000
Size: 0xEC8C00000 / 59,140,000,000B / 59GB
LUN 1 (Boot A):
Block size: 0x1000
Size: 0x400000 / 0,004,000,000B / 4MB
LUN 2 (Boot B):
Block size: 0x1000
Size: 0x400000 / 0,004,000,000B / 4MB
LUN 3:
Block size: 0x1000
Size: 0xB800000 / 0,184,000,000B / 184MB
LUN 4:
Block size: 0x1000
Size: 0xB000000 / 0,176,000,000B / 176MB
LUN 5:
Block size: 0x1000
Size: 0x6400000 / 0,100,000,000B / 100MB
Number of W-LUs found: 1
W-LUN 0xC4 (REPORT LUNS):
Block size: 0x100
Size: 0x400000 / 0,004,000,000B / 4MB
------

AND ONE UFS CHIP FROM G950F WITH THIS LOGS:

LUN 0:
Block size: 0x1000
Size: 0xEE4800000 / 59,584,000,000B / 59GB
LUN 1 (Boot A):
Block size: 0x1000
Size: 0x400000 / 0,004,000,000B / 4MB
LUN 2 (Boot B):
Block size: 0x1000
Size: 0x800000 / 0,008,000,000B / 8MB
LUN 3:
Block size: 0x1000
Size: 0x800000 / 0,008,000,000B / 8MB
Number of W-LUs found: 1
W-LUN 0xC4 (REPORT LUNS):
Block size: 0x100
Size: 0x1000000 / 0,016,000,000B / 16MB


HOW I CAN CHANGE LUN PARTITION SIZE???????

AND HOW I CAN GRAET OTHER LUN THAT
UFS CHIPSET DOES NOT HAVE IT?????????

UFS LUN's size can changed by "Write Chip Config" file via EasyJTAG Classic software for UFS chips, who have "Re-Configure: Enabled"

this UFS chips can't Re-Configure (OTP zone is set)

==========
UFS Device Information :
UFS Manufacturer: SAMSUNG, UFS ProductName: KM2V7001CM-B706
UFS OemID: SAMSUNG_OEM_ID, UFS SerialNumber: 0x2A90A9BCE90D7ED56F564316F28158423138395430454231
Maximum Number of LUs: 8, Number of LUs found: 4, Number of WLUs found: 1, LUs Re-configure: Disabled
UFS LUN 0 Capacity: 121972 MB (001DC7400000)
UFS LUN 1 (Boot A) Capacity: 4 MB (000000400000)
UFS LUN 2 (Boot B) Capacity: 4 MB (000000400000)
UFS LUN 3 Capacity: 60 MB (000003C00000)
UFS W-LUN 0xC4 (REPORT LUNS) Capacity: 16 MB (000001000000)
UFS Init completed.
==========

Then we have to use same as ufs chipset as the mobile ufs chipset with same lun size and count (how many lun are),yes?????????

that means if i want change g950f ufs chip i have to use another g950f ufs chipset.!!!!
and i cant use any other phone's ufs chip becuse we cant change LUN number and size
and its about 1% to find ufs chip from any other phone Exactly like as that we needed,yes??????????

UFS chip, as computer HDD can be partitioning
After partitioning, chip's may be write OTP - close Re-Configure function

if Re-Configure function not close (Enabled), chip can partitioning many times

i have activated my box, latest version and i have Morc Adpters


But when i want to read a UFS give this error.

With EMMC and ISP works normal.

The problem is when i want to read a memory UFS.


Box Drivers version: 3.2.0.0
Z3X Card Serial : AAD1-FXXX , ver: 22
Z3X Card Activation [JTAGPLUS] : ACTIVATED
Z3X Card Activation [LG] : NOT ACTIVATED
Z3X Card Activation [SAMS] : NOT ACTIVATED
Z3X Card Activation [JTAG] : ACTIVATED


Found 1 serial devices
COM5 USB\VID_1781&PID_AAAC&REV_0100&MI_00 MediaTek USB VCOM (Android) (COM5)
Selected pinout: GEN2 High Speed Pinout
Change EasyJTAG Pinout OK
Z3X EasyJtag Software ver. 3.6.1.2
UFS Socket Info.
Serial: 0123C09D037CXXXXX
Description: EasyJTAG UFS Socket 3 in 1 by MOORC 15.05.19

Can't open link, Code: -56, Reason: BOX: Chip not connected
Done.

Z3X EasyJtag Software ver. 3.6.1.2
UFS Socket Info.
Serial: 0123C09D037CC85BEE
Description: EasyJTAG UFS Socket 3 in 1 by MOORC 15.05.19

Can't open link, Code: -56, Reason: BOX: Chip not connected
Done.


Can you help me, please.

https://ibb.co/Byg2nbJ

in Easy jtag plus does not enable me frequency and bus width https://ibb.co/Byg2nbJ

Or i need to buy another activation? where buy that activation?

UFS connection use one freq: 66MHz
UFS not have bus width

1) update you soft to latest version
2) reboll you chip

http://forum.gsmhosting.com/vbb/f672.../#post13726620

http://forum.gsmhosting.com/vbb/f672.../#post13717343

Moorc icfriend Sockets has 2 lanes design. You can open it.
UFS LS 1 lane is 0.6-2.5MB/S. UFS-LS 2 lanes is 5-10MB/S.



从我的 iPhone 发送，使用 Tapatalk

If you buy in 20 June. Please change a new set. Please call resller. We have fixed all
I have test abou 148 models by Easyjtag plus+icfriend ufs 3 in1 Sockets.
We have add Mircon Skhynix BGA254 UFS chips support. Hard work with UFS.
So don’t worry about this. https://uploads.tapatalk-cdn.com/201...9bf75dd528.jpg


从我的 iPhone 发送，使用 Tapatalk

Same error with latest version

And rebolled sim

https://ibb.co/MM0Xz38

Im buyed 04/06/2019

but the Easy jtag reconoice the ICFRIED serial, the problem is that do not reconoce the simcard in UFS mode.

https://smartjtagbox.com/owncloud/in...SDos6gNNijLcHP
Download it. And update your box FW.

1,show me your socket picture
2.and look at the pictures. How to use icfriend socket

. https://uploads.tapatalk-cdn.com/201...b14f305724.jpghttps://uploads.tapatalk-cdn.com/201...d834131b04.jpghttps://uploads.tapatalk-cdn.com/201...7ae8575378.jpg


从我的 iPhone 发送，使用 Tapatalk

Brother. If you buying 4 June. Please change a new version from your resller in your contory. We have fixed all bugs after 20 june.
This is free change.
Thank you.


从我的 iPhone 发送，使用 Tapatalk

https://ibb.co/sRm9pHb

Pictures Moorc https://ibb.co/3C4c9hY

Yes. You need change a new socket. Call resller. Please.


从我的 iPhone 发送，使用 Tapatalk

https://uploads.tapatalk-cdn.com/201...a7084365a4.jpg
This is new socket


从我的 iPhone 发送，使用 Tapatalk

My wechat moorc2014
Facebook:icfriend


从我的 iPhone 发送，使用 Tapatalk

I'm glad to see the new re-design of you adapter ))))

Moorc Has Relaunch Its Adapter With Some Changes How Can I Know I Am Using Old One Or New One Is There Any Difference On Apprentice...?How Can I Check ?

See attached picture

UFS memory connection troubles, question, discuss thread
 

Post you questions at this thread

Few Questions In My Head Kindly Clear It Friend


When Easy Socket For 254 Available In Market...?

Is Easy Socket Also Available In 2 Diff Hardware? Rev. 2 After Fix Speed Issue Or Came With 1 Varient Only Works Well With All Latest Chip Available In Market?

How To Identify Chip Is UFS Or EMCP... Can We Use ISP On Ufs?

Easy JTAG Plus Adapter Also Support EMCP+UFS Or UFS Only... Pinout Different Or Same For UFS Or EMCP What Additional Needed For Ufs? Why There is need for new Socket..

From Z3x - After we check't it with many UFS IC (next few mounth)

At BGA254 - by IT'S NAME (see dataseet)

Easy UFS BGA 153 Also need some re-design Release, like MOORC Socket ? or its already fixed from the start ? or such Change only for BGA254 In Moorc Socket to more support like UFS CH1 & CH2 For some speed ?

No, current revisions are work is good. We will released next revision later with another power stabilizator

OLD MOORC soket use olny 1 channel, MOORC is replaced it to new revision.
NEW revision of MOORC is at testing now, and work good

read and write speed with too slow ufs

Read this:

http://forum.gsmhosting.com/vbb/f672.../#post13726765

Is Easy Adapter Support Emmc + UFS Both Chip Or UFS Only...?

emmc and UFS is different technology
sockets is differents

https://scontent.fdel5-1.fna.fbcdn.n...41&oe=5DBC221E


According To This Image Txt ICFriend Socket Support UFS + EMMC Both ...While Easy Socket Only Support UFS Right...?

this socket support only UFS chips
maybe if use another bottom basem, upper socket can use for eMMC BGA 153/254, but I can't know this

At photo I see complect only with UFS bottom plate

when will your next revision be released (with another power stabilizer) for UFS BGA 153? Current revision has any limitation without another stabilizer?

current Moork and our revision is work good

Pls help me ! I buy UFS socket ICFriend 2in1 (Ver new) by Moorc but speed read and write very slow. (6xxkB/s to 7xxkB/s) How to solve the problem ?

https://i.ibb.co/NS9fxbp/HTC-11-Plus-ok-2.jpg

You need read 7-th post of this thread

We have no add adapter. So don’t support emcp bga254. If you have eMate x. Why you need ?


从我的 iPhone 发送，使用 Tapatalk

can handle ufs like emmc test point? or need to chip off

emmc 5.1 and somr 5.0 have signed eMMC firmware, not wiped eMMC

we can't have info about UFS firmware.

But if it are exist, we can't restore dead IC, becouse it not wipe internal NAND after it run

what does the following message mean after identify UFS ? tks

Can't init device, Code: -101, Reason: UTP: Received unexpected response

what's the difference between wipe userdata and format userdata? tks

I do wipe user data to samsung A50 and the phone hang on the samsung logo, :(

SKHYNIX h2mu64122mar UFS JTAG NOT SUPPORTED
 

I want to recover data from samsung sm-g925f with chip-off
Any info on this problem?
-----------------------------------------------------

Setting interface to EasyJtag2/UFS
Socket Information :
Socket Mark: EasyJTAG UFS Socket BGA-95 by EasyJTAG 26.05.19
Socket Serial: 012XXXXXXXXX63C6EE
UFS Power Information :
Mode: Low, VCC: 3259mV, VCCQ2: 1828mV
UFS Device Information :
UFS Manufacturer: SKHYNIX, UFS ProductName: HBG4a
UFS OemID: 01AD, UFS SerialNumber: 0x0228052D7A80
Maximum Number of LUs: 0, Number of LUs found: 0, Number of WLUs found: 0, LUs Re-configure: Enabled
This UFS is temporarily not supported.
UFS Init completed.

this eMMC is down sometime when it connect.
we are temporary disable it, becouse it may be dead at read/write operations