Warning: Health report is very BAD - GSM-Forum

JLALAT · 11-07-2018, 12:11

hi easy team
some one can help me to solve this problm on samsung j200h
Warning: Health report is very BAD
im traying many time but same error

Changelog:

06.08.2018 (ver 1520)
Fix: Bugs that have been found through your crash report
Fix: Writing ROM2 for Samsung (Write by vendor)
Fix: Freezing the program on a RandomVerify
Add: Folder for saving to Explorer (in settings)
Add: Extract from storevol from emmc (explorer)
Add: Automatic repair of damaged storevol when extracting (Explorer)
Add: Adding MountPoints for partitions (efs, userdata) when formatting
Add: Checking for an empty EFS before backup (Read by Vendor Samsung)

Setting frequence to 14 Mhz
CMD Pullup Level: 2361 mV
CMD Active Level: 2743 mV
EMMC Device Information :
EMMC CID: 90014A483847347421012275201373E6
EMMC CSD: D07F01320F5903FFFFFFFFEF8A400012
EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4t , HEX: 483847347400 , S/N: 22752013 , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 7/2016
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H8G4t_22752013_20181107_112607extcsd
EMMC Init completed.

Warning: Health report is very BAD

Device Life Time Estimation (MLC) [269]: 0x06 50% - 60% device life time used
Device Life Time Estimation (SLC) [268]: 0x01 0% - 10% device life time used
Pre EOL information [267]: 0x03 Urgent

Get firmware version
Firmware info not found

thanks in advance

mutewitness · 11-07-2018, 12:52

do hardware partition some times work

JLALAT · 11-07-2018, 13:00

can you give steps to do this
im new in jtag

durgesh4rbl · 11-07-2018, 13:27

Quote:

Originally Posted by JLALAT

can you give steps to do this
im new in jtag

this forum help u but language different try to google translate

Îñîáåííîñòè ñîçäàíèÿ ðàçäåëà GP1

layder · 11-07-2018, 23:06

Quote:

Originally Posted by JLALAT

hi easy team

some one can help me to solve this problm on samsung j200h
Warning: Health report is very BAD

Warning: Health report is very BAD

Device Life Time Estimation (MLC) [269]: 0x06 50% - 60% device life time used
Device Life Time Estimation (SLC) [268]: 0x01 0% - 10% device life time used
Pre EOL information [267]: 0x03 Urgent

What is you problem?

At log are written:
the chip is worn by 50-60%

Want the report to be better? Change the chip to a new one.

JLALAT · 11-08-2018, 15:41

so there is no solution to fix it with easy ??

layder · 11-08-2018, 19:03

Quote:

Originally Posted by JLALAT

so there is no solution to fix it with easy ??

can you make an old person young? you have solution for this?

memory cells wear out and they have a number of write cycles after which their operation is practically impossible

abdul alim · 04-30-2021, 17:29

I Have Same Problem How To Work

Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100414A544434520037E0F0E055D5
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: AJTD4R , HEX: 414A54443452 , S/N: 37E0F0E0 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 5/2018
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 2 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x01 , width 4bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: AJTD4R_37E0F0E0_20210430_221348.extcsd
EMMC Init completed.

Warning: Health report is very BAD

Device Life Time Estimation (MLC) [269]: 0x08 70% - 80% device life time used
Device Life Time Estimation (SLC) [268]: 0x08 70% - 80% device life time used
Pre EOL information [267]: 0x01 Normal

Scanning soft partitions
Partition table not found

Get firmware version
Firmware info not found

..::GMSR::.. · 04-30-2021, 17:38

Warning: Health Report is Very BAD Solution by Easy JTAG try this procedure with your phone.

layder · 04-30-2021, 19:43

Quote:

Originally Posted by abdul alim

I Have Same Problem How To Work

https://forum.gsmhosting.com/vbb/f67...tatus-2923093/

11-07-2018, 12:11	#1 (permalink)
JLALAT Junior Member Join Date: Apr 2016 Posts: 15 Member: 2565912 Status: Offline Sonork: SZZSZS Thanks Meter: 7	Warning: Health report is very BAD hi easy team some one can help me to solve this problm on samsung j200h Warning: Health report is very BAD im traying many time but same error Changelog: 06.08.2018 (ver 1520) Fix: Bugs that have been found through your crash report Fix: Writing ROM2 for Samsung (Write by vendor) Fix: Freezing the program on a RandomVerify Add: Folder for saving to Explorer (in settings) Add: Extract from storevol from emmc (explorer) Add: Automatic repair of damaged storevol when extracting (Explorer) Add: Adding MountPoints for partitions (efs, userdata) when formatting Add: Checking for an empty EFS before backup (Read by Vendor Samsung) Setting frequence to 14 Mhz CMD Pullup Level: 2361 mV CMD Active Level: 2743 mV EMMC Device Information : EMMC CID: 90014A483847347421012275201373E6 EMMC CSD: D07F01320F5903FFFFFFFFEF8A400012 EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4t , HEX: 483847347400 , S/N: 22752013 , rev. 0x01 EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 7/2016 EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000) EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000) EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No Extended CSD Information : Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1) Boot Bus Config: 0x00 , width 1bit H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled Supported partition features [PARTITIONING_SUPPORT]: 0x07 Device supports partitioning features Device can have enhanced technological features in partitions and user data area Device can have extended partitions attribute Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00 Backup saved: H8G4t_22752013_20181107_112607extcsd EMMC Init completed. Warning: Health report is very BAD Device Life Time Estimation (MLC) [269]: 0x06 50% - 60% device life time used Device Life Time Estimation (SLC) [268]: 0x01 0% - 10% device life time used Pre EOL information [267]: 0x03 Urgent Get firmware version Firmware info not found thanks in advance

04-30-2021, 17:29	#8 (permalink)
abdul alim Junior Member Join Date: Jul 2010 Location: mirzapur Posts: 31 Member: 1353284 Status: Offline Sonork: mirzapur Thanks Meter: 2	I Have Same Problem How To Work Setting interface to EasyJtag2/E-Socket Setting bus width to 8 Bit Setting frequence to 42 MHz EMMC Device Information : EMMC CID: 150100414A544434520037E0F0E055D5 EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D EMMC Manufacture : SAMSUNG , EMMC NAME: AJTD4R , HEX: 414A54443452 , S/N: 37E0F0E0 , rev. 0x00 EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 5/2018 EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000) EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000) EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 2 , Response: Not Clean EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No Extended CSD Information : Extended CSD rev: 1.8 (MMC 5.1) Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1) Boot Bus Config: 0x01 , width 4bit H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled Supported partition features [PARTITIONING_SUPPORT]: 0x07 Device supports partitioning features Device can have enhanced technological features in partitions and user data area Device can have extended partitions attribute Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00 Backup saved: AJTD4R_37E0F0E0_20210430_221348.extcsd EMMC Init completed. Warning: Health report is very BAD Device Life Time Estimation (MLC) [269]: 0x08 70% - 80% device life time used Device Life Time Estimation (SLC) [268]: 0x08 70% - 80% device life time used Pre EOL information [267]: 0x01 Normal Scanning soft partitions Partition table not found Get firmware version Firmware info not found Last edited by layder; 04-30-2021 at 19:43. Reason: merge posts

04-30-2021, 17:38	#9 (permalink)
..::GMSR::.. No Life Poster Join Date: Nov 2010 Location: RSA-2048 Age: 38 Posts: 1,716 Member: 1444462 Status: Offline Thanks Meter: 1,337	Warning: Health Report is Very BAD Solution by Easy JTAG Warning: Health Report is Very BAD Solution by Easy JTAG try this procedure with your phone.

11-07-2018, 12:52	#2 (permalink)
mutewitness Freak Poster Join Date: Oct 2011 Location: Pakistan Posts: 205 Member: 1674109 Status: Offline Thanks Meter: 36	do hardware partition some times work

11-07-2018, 13:00	#3 (permalink)
JLALAT Junior Member Join Date: Apr 2016 Posts: 15 Member: 2565912 Status: Offline Sonork: SZZSZS Thanks Meter: 7	can you give steps to do this im new in jtag

11-08-2018, 15:41	#6 (permalink)
JLALAT Junior Member Join Date: Apr 2016 Posts: 15 Member: 2565912 Status: Offline Sonork: SZZSZS Thanks Meter: 7	so there is no solution to fix it with easy ??