GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Easy-Jtag / Easy-Jtag Plus
Reload this Page Warning: Health report is very BAD
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source Mark Forums Read


Easy-Jtag / Easy-Jtag Plus The official support section. You can ask here your question and get answer regarding using Easy-Jtag / Easy-Jtag Plus.

Reply
 
LinkBack Thread Tools Display Modes
Old 01-29-2020, 15:40   #1 (permalink)
No Life Poster
 
shoaibrao's Avatar
 
Join Date: Dec 2006
Location: GSM WORLD
Posts: 3,295
Member: 412843
Status: Offline
Sonork: 100.1604902
Thanks Meter: 497
Donate money to this user
Warning: Health report is very BAD

Oppo F7 CPH1819
Extended CSD rev: 1.8 (MMC 5.1)
Possible To Repair?
Need Help Please

EasyJTAG Plus
Check EMMC/UFS
Code:
Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 36 MHz
CMD Pullup Level: 1823 mV
CMD Active Level: 1876 mV
EMMC Device Information :
EMMC CID: 90014A484347386134A408282905B4AB
EMMC CSD: D02701328F5903FFFFFFFFEF8A400027
EMMC Manufacture : SKHYNIX , EMMC NAME: HCG8a4 , HEX: 484347386134 , S/N: 08282905 , rev. 0xA4
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 11/2017
   EMMC ROM 1 (Main User Data) Capacity: 59640 MB (000E8F800000)
   EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
   EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 60 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x02 , width 8bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: HCG8a4_08282905_20200129_193217.extcsd
EMMC Init completed.

Warning: Health report is very BAD

Device Life Time Estimation (MLC) [269]: 0x02   10% - 20% device life time used
Device Life Time Estimation (SLC) [268]: 0x01   0% - 10% device life time used
Pre EOL information [267]: 0x03   Urgent

Scanning soft partitions
GPT header is found and is valid
Partition: boot_para, [000000008000 - 000000108000], size: 000000100000 (1.00 MB)
Partition: recovery, [000000108000 - 000004108000], size: 000004000000 (64.0 MB)
Partition: para, [000004108000 - 000004188000], size: 000000080000 (512. KB)
Partition: reserve1, [000004188000 - 000004388000], size: 000000200000 (2.00 MB)
Partition: reserve2, [000004388000 - 000005388000], size: 000001000000 (16.0 MB)
Partition: reserve3, [000005388000 - 000005588000], size: 000000200000 (2.00 MB)
Partition: reserve4, [000005588000 - 000006588000], size: 000001000000 (16.0 MB)
Partition: reserve_exp1, [000006588000 - 000006788000], size: 000000200000 (2.00 MB)
Partition: oppo_custom, [000006788000 - 000006888000], size: 000000100000 (1.00 MB)
Partition: expdb, [000006888000 - 000007C88000], size: 000001400000 (20.0 MB)
Partition: frp, [000007C88000 - 000007D88000], size: 000000100000 (1.00 MB)
Partition: nvcfg, [000007D88000 - 000009D88000], size: 000002000000 (32.0 MB)
Partition: nvdata, [000009D88000 - 00000DD88000], size: 000004000000 (64.0 MB)
Partition: metadata, [00000DD88000 - 00000FD88000], size: 000002000000 (32.0 MB)
Partition: protect1, [00000FD88000 - 000010588000], size: 000000800000 (8.00 MB)
Partition: protect2, [000010588000 - 000011000000], size: 000000A78000 (10.4 MB)
Partition: seccfg, [000011000000 - 000011800000], size: 000000800000 (8.00 MB)
Partition: persist, [000011800000 - 000014800000], size: 000003000000 (48.0 MB)
Partition: sec1, [000014800000 - 000014A00000], size: 000000200000 (2.00 MB)
Partition: proinfo, [000014A00000 - 000014D00000], size: 000000300000 (3.00 MB)
Partition: md1img, [000014D00000 - 00001B100000], size: 000006400000 (100. MB)
Partition: spmfw, [00001B100000 - 00001B200000], size: 000000100000 (1.00 MB)
Partition: scp1, [00001B200000 - 00001B800000], size: 000000600000 (6.00 MB)
Partition: scp2, [00001B800000 - 00001BE00000], size: 000000600000 (6.00 MB)
Partition: sspm_1, [00001BE00000 - 00001BF00000], size: 000000100000 (1.00 MB)
Partition: sspm_2, [00001BF00000 - 00001C000000], size: 000000100000 (1.00 MB)
Partition: cam_vpu1, [00001C000000 - 00001CF00000], size: 000000F00000 (15.0 MB)
Partition: cam_vpu2, [00001CF00000 - 00001DE00000], size: 000000F00000 (15.0 MB)
Partition: cam_vpu3, [00001DE00000 - 00001ED00000], size: 000000F00000 (15.0 MB)
Partition: gz1, [00001ED00000 - 00001FD00000], size: 000001000000 (16.0 MB)
Partition: gz2, [00001FD00000 - 000020D00000], size: 000001000000 (16.0 MB)
Partition: nvram, [000020D00000 - 000024D00000], size: 000004000000 (64.0 MB)
Partition: lk, [000024D00000 - 000025200000], size: 000000500000 (5.00 MB)
Partition: lk2, [000025200000 - 000025700000], size: 000000500000 (5.00 MB)
Partition: boot, [000025700000 - 000027700000], size: 000002000000 (32.0 MB)
Partition: logo, [000027700000 - 000028700000], size: 000001000000 (16.0 MB)
Partition: odmdtbo, [000028700000 - 000029700000], size: 000001000000 (16.0 MB)
Partition: tee1, [000029700000 - 000029C00000], size: 000000500000 (5.00 MB)
Partition: tee2, [000029C00000 - 00002A800000], size: 000000C00000 (12.0 MB)
Partition: odm, [00002A800000 - 00003A800000], size: 000010000000 (256. MB)
Partition: vendor, [00003A800000 - 00008D800000], size: 000053000000 (1.30 GB)
Partition: system, [00008D800000 - 00019A800000], size: 00010D000000 (4.20 GB)
Partition: cache, [00019A800000 - 0001B5800000], size: 00001B000000 (432. MB)
Partition: userdata, [0001B5800000 - 000E8BCFBE00], size: 000CD64FBE00 (51.3 GB)
Partition: otp, [000E8BCFBE00 - 000E8E7FBE00], size: 000002B00000 (43.0 MB)
Partition: flashinfo, [000E8E7FBE00 - 000E8F7FBE00], size: 000001000000 (16.0 MB)
GPT header successfully parsed

Get firmware version

Manufacturer = OPPO
CPU Abi = arm64-v8a
Android release = 8.1.0
Brand = OPPO
Device = CPH1819
Model = CPH1819
Firmware version = CPH1819EX_11_A.38
Firmware date = Mon Oct 28 11:14:00 CST 2019

EasyJTAG Plus
S.M.A.R.T Report
Code:
Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 36 MHz
CMD Pullup Level: 1822 mV
CMD Active Level: 1876 mV
EMMC Device Information :
EMMC CID: 90014A484347386134A408282905B4AB
EMMC CSD: D02701328F5903FFFFFFFFEF8A400027
EMMC Manufacture : SKHYNIX , EMMC NAME: HCG8a4 , HEX: 484347386134 , S/N: 08282905 , rev. 0xA4
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 11/2017
   EMMC ROM 1 (Main User Data) Capacity: 59640 MB (000E8F800000)
   EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
   EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 60 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x02 , width 8bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: HCG8a4_08282905_20200129_193823.extcsd
EMMC Init completed.

Operation: Reading S.M.A.R.T Report ...

Device Life Time Estimation (MLC) [269]: 0x01   0% - 10% device life time used
Device Life Time Estimation (SLC) [268]: 0x01   0% - 10% device life time used
Pre EOL information [267]: 0x03   Urgent

Optimal Read Size [266]: 0x40   256 KB
Optimal Write Size [265]: 0x40   256 KB
Optimal Trim Unit Size [264]: 0x07   28 KB
Z3X EasyJtag Software ver. 3.6.2.1
Detect
Code:
---------- eMMC Device Information ----------

eMMC CID : 90014A484347386134A408282905B4AB
eMMC CSD : D02701328F5903FFFFFFFFEF8A400027
eMMC Manufacturer ID: 0090 , OEM ID: 014A
eMMC Date: 11/2017  Rev.0xA4
eMMC NAME: HCG8a4 , S/N:  136849669
eMMC NAME (HEX): 484347386134 
EMMC ROM1 (Main User Data)   Capacity: 59640 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC RPMB is programmed and written 60 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
  Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x02 , width 8bits  , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
 Device support partitioning feature
 Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: HCG8a4_ 136849669_20200129_1944.extcsd
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 747C000 sectors 58.2 GiB 
Soft (Partitioned) Disk/Image size: 747BFBC sectors 58.2 GiB 
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200  bytes ,First/Last usable sector: 34,122142686
Partition info successfully found
------ Detected 46 partitions ------
P0 (BOOT_PARA) [0x8000 0x100000] Size: 1.0MB
P1 (RECOVERY) [0x108000 0x4000000] Size: 64.0MB
P2 (PARA) [0x4108000 0x80000] Size: 512.0KB
P3 (RESERVE1) [0x4188000 0x200000] Size: 2.0MB
P4 (RESERVE2) [0x4388000 0x1000000] Size: 16.0MB
P5 (RESERVE3) [0x5388000 0x200000] Size: 2.0MB
P6 (RESERVE4) [0x5588000 0x1000000] Size: 16.0MB
P7 (RESERVE_EXP1) [0x6588000 0x200000] Size: 2.0MB
P8 (OPPO_CUSTOM) [0x6788000 0x100000] Size: 1.0MB
P9 (EXPDB) [0x6888000 0x1400000] Size: 20.0MB
P10 (FRP) [0x7c88000 0x100000] Size: 1.0MB
P11 (NVCFG) [0x7d88000 0x2000000] Size: 32.0MB
P12 (NVDATA) [0x9d88000 0x4000000] Size: 64.0MB
P13 (METADATA) [0xdd88000 0x2000000] Size: 32.0MB
P14 (PROTECT1) [0xfd88000 0x800000] Size: 8.0MB
P15 (PROTECT2) [0x10588000 0xa78000] Size: 10.468MB
P16 (SECCFG) [0x11000000 0x800000] Size: 8.0MB
P17 (PERSIST) [0x11800000 0x3000000] Size: 48.0MB
P18 (SEC1) [0x14800000 0x200000] Size: 2.0MB
P19 (PROINFO) [0x14a00000 0x300000] Size: 3.0MB
P20 (MD1IMG) [0x14d00000 0x6400000] Size: 100.0MB
P21 (SPMFW) [0x1b100000 0x100000] Size: 1.0MB
P22 (SCP1) [0x1b200000 0x600000] Size: 6.0MB
P23 (SCP2) [0x1b800000 0x600000] Size: 6.0MB
P24 (SSPM_1) [0x1be00000 0x100000] Size: 1.0MB
P25 (SSPM_2) [0x1bf00000 0x100000] Size: 1.0MB
P26 (CAM_VPU1) [0x1c000000 0xf00000] Size: 15.0MB
P27 (CAM_VPU2) [0x1cf00000 0xf00000] Size: 15.0MB
P28 (CAM_VPU3) [0x1de00000 0xf00000] Size: 15.0MB
P29 (GZ1) [0x1ed00000 0x1000000] Size: 16.0MB
P30 (GZ2) [0x1fd00000 0x1000000] Size: 16.0MB
P31 (NVRAM) [0x20d00000 0x4000000] Size: 64.0MB
P32 (LK) [0x24d00000 0x500000] Size: 5.0MB
P33 (LK2) [0x25200000 0x500000] Size: 5.0MB
P34 (BOOT) [0x25700000 0x2000000] Size: 32.0MB
P35 (LOGO) [0x27700000 0x1000000] Size: 16.0MB
P36 (ODMDTBO) [0x28700000 0x1000000] Size: 16.0MB
P37 (TEE1) [0x29700000 0x500000] Size: 5.0MB
P38 (TEE2) [0x29c00000 0xc00000] Size: 12.0MB
P39 (ODM) [0x2a800000 0x10000000] Size: 256.0MB
P40 (VENDOR) [0x3a800000 0x53000000] Size: 1.296GB
P41 (SYSTEM) [0x8d800000 0x10d000000] Size: 4.203GB
P42 (CACHE) [0x19a800000 0x1b000000] Size: 432.0MB
P43 (USERDATA) [0x1b5800000 0xcd64fbe00] Size: 51.347GB
P44 (OTP) [0xe8bcfbe00 0x2b00000] Size: 43.0MB
P45 (FLASHINFO) [0xe8e7fbe00 0x1000000] Size: 16.0MB
------------------------------------
------ Android information ------
Detected LINUX(Android) SYSTEM : 0x008D800000 (4.203GB)
Short EXT fs info:
Size: 4.203GB
Block size: 4.0KB
Inode size: 256
Inodes: 275808
Short Android info:
Backup saved: BuildProp_20200129_1944.txt
Build ID:  O11019
Release Base ID:  8.1.0
Security Path:  2019-11-05
Architecture ABI:  arm64-v8a
Device manufacturer:  OPPO
Build Description:  full_oppo6771_17331-user 8.1.0 O11019 1572232253 release-keys
---------------------------------------------
Detected USERDATA USERDATA : 0x01B5800000 (51.347GB)
Unable to mount USERDATA , code : 95
Userdata Superblock contents::
 0FC8CE9F 6BB27BB7 B3664C29 EBB4CC17 4074B21B 50158A4E B943A8F9 F5663E4B     .ÈΟk²{·³fL)ë´Ì.@t².P.ŠN¹C¨ùõf>K;
 E5281A12 2EF2817B 8973367C 48F05A03 5BFC0B40 827BBCF3 9D37FDE4 6841B04E     å(...ò.{‰s6|HðZ.[ü.@‚{¼ó.7ýähA°N;
 B9EF1CA9 6852035D D9745A97 3BFAF228 055658C4 A96519E9 15F18E0E 4981F1F2     ¹ï.©hR.]ÙtZ—;úò(.VXÄ©e.é.ñŽ.I.ñò;
 8885D265 B88A3A66 42CF0497 0B2F1DEB A0BB67F7 FDD89228 370DF1A3 1578360E     .…Òe¸Š:fBÏ.—./.ë*»g÷ýØ’(7.ñ£.x6.;
 A00332DB 6E36E740 C77264EA 0E815B6C E8CFD0E7 690810F6 DF745119 68647D87     *.2Ûn6ç@Çrdê..[lèÏÐçi..ößtQ.hd}‡;
 7689324C A659F36B 0AC20433 21278EA7 AB3C50EA E29DB3EC EA658B28 DFFFEB26     v‰2L¦Yók.Â.3!'Ž§«<Pêâ.³ìêe‹(ßÿë&;
 E1727F8F F6EE5903 E9BA12F9 4010F8BF 39CEF1BB 7FF35344 EE2E52AB DF73A178     ár..öîY.éº.ù@.ø¿9Îñ».óSDî.R«ßs¡x;
 808F1B7C BCD8489C F28BD804 FD86A4E5 C85C0E8E 23E39EF9 064E33E1 FF8F2909     ...|¼ØHœò‹Ø.ý†¤åÈ\.Ž#ãžù.N3áÿ.)	;
Done.

Selected eMMC Interface
Last edited by shoaibrao; 01-29-2020 at 15:47.
  Reply With Quote
Old 02-01-2020, 12:16   #2 (permalink)
Product Supporter
 
layder's Avatar
 
Join Date: Jun 2002
Location: Belarus
Age: 47
Posts: 3,187
Member: 13148
Status: Offline
Thanks Meter: 2,948
what type of repair you need?

Bad health eMMC status?
If ypu have HDD with bad smart status, how you repair it?

Replace eMMC is best solution
  Reply With Quote
The Following 3 Users Say Thank You to layder For This Useful Post:
Show/Hide list of the thanked
Old 02-01-2020, 13:12   #3 (permalink)
No Life Poster
 
shoaibrao's Avatar
 
Join Date: Dec 2006
Location: GSM WORLD
Posts: 3,295
Member: 412843
Status: Offline
Sonork: 100.1604902
Thanks Meter: 497
Donate money to this user
Quote:
Originally Posted by layder View Post
what type of repair you need?

Bad health eMMC status?
If ypu have HDD with bad smart status, how you repair it?

Replace eMMC is best solution
Before Doing Any Thing Taken Backup Of
1-EXTCSD
2-EMMC_ROM1 512MB
3-EMMC_ROM2 4MB
4-EMMC_ROM3 4MB

After Taken BackUp
With EasyJTAG Plus
Made
GP1 Size 0MB
GP2 Size 0MB
GP3 Size 0MB
Gp3 Size OMB
After Final Write
Code:
Operation: Reading S.M.A.R.T Report ...
Device Life Time Estimation (MLC) [269]: 0x01   0% - 10% device life time used
Device Life Time Estimation (SLC) [268]: 0x01   0% - 10% device life time used
Pre EOL information [267]: 0x01   Normal
 
Optimal Read Size [266]: 0x40   256 KB
Optimal Write Size [265]: 0x40   256 KB
Optimal Trim Unit Size [264]: 0x07   28 KB
After That Written Backup Taken Before Doing Any Thing
After That Unpacked OPF File With EasyJTAG Plus
Written Extracted Firmware With EasyJTAG Plus
Write by vendor " MediaTak "
All processes Ok
EasyJTAG Plus Showing Info OK
Code:
Get firmware version

Manufacturer = OPPO
CPU Abi = arm64-v8a
Android release = 8.1.0
Brand = OPPO
Device = CPH1819
Model = CPH1819
Firmware version = CPH1819EX_11_A.38
Firmware date = Mon Oct 28 11:14:00 CST 2019
But Fone Not Getting Power On
Seems Oppo Has Some Any Extra Security On EMMC
Need More Help Please If Possible
Thanks Anticipation
  Reply With Quote
Old 02-01-2020, 19:01   #4 (permalink)
No Life Poster
 
hitech care's Avatar
 
Join Date: Nov 2012
Location: Ek India Happy Wala.. :-)
Posts: 2,828
Member: 1834832
Status: Offline
Thanks Meter: 1,450
Quote:
Originally Posted by shoaibrao View Post
Before Doing Any Thing Taken Backup Of
1-EXTCSD
2-EMMC_ROM1 512MB
3-EMMC_ROM2 4MB
4-EMMC_ROM3 4MB

After Taken BackUp
With EasyJTAG Plus
Made
GP1 Size 0MB
GP2 Size 0MB
GP3 Size 0MB
Gp3 Size OMB
After Final Write
Code:
Operation: Reading S.M.A.R.T Report ...
Device Life Time Estimation (MLC) [269]: 0x01   0% - 10% device life time used
Device Life Time Estimation (SLC) [268]: 0x01   0% - 10% device life time used
Pre EOL information [267]: 0x01   Normal
 
Optimal Read Size [266]: 0x40   256 KB
Optimal Write Size [265]: 0x40   256 KB
Optimal Trim Unit Size [264]: 0x07   28 KB
After That Written Backup Taken Before Doing Any Thing
After That Unpacked OPF File With EasyJTAG Plus
Written Extracted Firmware With EasyJTAG Plus
Write by vendor " MediaTak "
All processes Ok
EasyJTAG Plus Showing Info OK
Code:
Get firmware version

Manufacturer = OPPO
CPU Abi = arm64-v8a
Android release = 8.1.0
Brand = OPPO
Device = CPH1819
Model = CPH1819
Firmware version = CPH1819EX_11_A.38
Firmware date = Mon Oct 28 11:14:00 CST 2019
But Fone Not Getting Power On
Seems Oppo Has Some Any Extra Security On EMMC
Need More Help Please If Possible
Thanks Anticipation
Post Read Info Full Log With Plus Module I Will Check N Try To Help U..Few Days Back I Did Same Handset Boot Repair
  Reply With Quote
Old 02-01-2020, 20:39   #5 (permalink)
No Life Poster
 
shoaibrao's Avatar
 
Join Date: Dec 2006
Location: GSM WORLD
Posts: 3,295
Member: 412843
Status: Offline
Sonork: 100.1604902
Thanks Meter: 497
Donate money to this user
Quote:
Originally Posted by hitech care View Post
Post Read Info Full Log With Plus Module I Will Check N Try To Help U..Few Days Back I Did Same Handset Boot Repair
Thanks Sir For Replying For Help
Which Log You Need?
Before Repair [When Was Alive]?
Or After Completion [Dead Fone Log] ?
  Reply With Quote
Old 02-01-2020, 21:06   #6 (permalink)
Product Supporter
 
layder's Avatar
 
Join Date: Jun 2002
Location: Belarus
Age: 47
Posts: 3,187
Member: 13148
Status: Offline
Thanks Meter: 2,948
Quote:
Originally Posted by shoaibrao View Post
But Fone Not Getting Power On
Seems Oppo Has Some Any Extra Security On EMMC
Need More Help Please If Possible
Wow - you get phone power-on
But it will be dead next week-month

You do work for people and take money from it.
But you do not put yourself in the place of a user whose device fails through a dividend or a month.

Would you be nice to use such a device?

That's why I do not respect people like you

You are money-maker piople, and I will not give solutions for you, that do not guarantee the device normally work in the future
  Reply With Quote
The Following 6 Users Say Thank You to layder For This Useful Post:
Show/Hide list of the thanked
Old 02-01-2020, 21:13   #7 (permalink)
No Life Poster
 
shoaibrao's Avatar
 
Join Date: Dec 2006
Location: GSM WORLD
Posts: 3,295
Member: 412843
Status: Offline
Sonork: 100.1604902
Thanks Meter: 497
Donate money to this user
Quote:
Originally Posted by layder View Post
Wow - you get phone power-on
But it will be dead next week-mounth

You do people work and take money.
But you do not put yourself in the place of a user whose device fails through a dividend or a month.

Would you be nice to use such a device?

That's why I do not respect people like you
Respected Sir
Please Respect Others So They Respect You.
And Please Read Again Carefully What I Said.
Fone Is Still Dead.
And I M Not Hungry Of Money.
How You Assumed ?
This Thread Just For Learning.
No Regards
  Reply With Quote
The Following 2 Users Say Thank You to shoaibrao For This Useful Post:
Old 02-01-2020, 23:54   #8 (permalink)
Product Supporter
 
layder's Avatar
 
Join Date: Jun 2002
Location: Belarus
Age: 47
Posts: 3,187
Member: 13148
Status: Offline
Thanks Meter: 2,948
Quote:
Originally Posted by shoaibrao View Post
Respected Sir
Please Respect Others So They Respect You.
And Please Read Again Carefully What I Said.
Fone Is Still Dead.
And I M Not Hungry Of Money.
How You Assumed ?
This Thread Just For Learning.
No Regards
You eMMC health status have:
Quote:
Device Life Time Estimation (MLC) [269]: 0x01 0% - 10% device life time used
Device Life Time Estimation (SLC) [268]: 0x01 0% - 10% device life time used
Pre EOL information [267]: 0x03 Urgent

Pre EOL information: overall status for reserved blocks. Possible values are:

0x00 - Not defined.
0x01 - Normal: consumed less than 80% of the reserved blocks.
0x02 - Warning: consumed 80% of the reserved blocks.
0x03 - Urgent: consumed 90% of the reserved blocks.


You eMMC use over 90% of reserved bad blocks

It need be replace
  Reply With Quote
The Following 3 Users Say Thank You to layder For This Useful Post:
Show/Hide list of the thanked
Old 02-02-2020, 04:43   #9 (permalink)
No Life Poster
 
kothamamun's Avatar
 
Join Date: Apr 2016
Location: B A N G L A D E S H
Posts: 3,186
Member: 2556542
Status: Offline
Thanks Meter: 1,790
no need replace emmc just make partition and write dum file and flash officiall firmware
phone will alive 100%
  Reply With Quote
Old 02-02-2020, 07:50   #10 (permalink)
No Life Poster
 
shoaibrao's Avatar
 
Join Date: Dec 2006
Location: GSM WORLD
Posts: 3,295
Member: 412843
Status: Offline
Sonork: 100.1604902
Thanks Meter: 497
Donate money to this user
Quote:
Originally Posted by layder View Post
You eMMC health status have:



Pre EOL information: overall status for reserved blocks. Possible values are:

0x00 - Not defined.
0x01 - Normal: consumed less than 80% of the reserved blocks.
0x02 - Warning: consumed 80% of the reserved blocks.
0x03 - Urgent: consumed 90% of the reserved blocks.


You eMMC use over 90% of reserved bad blocks

It need be replace
Thank You So Much For Helping Sir
  Reply With Quote
Old 02-02-2020, 07:52   #11 (permalink)
No Life Poster
 
shoaibrao's Avatar
 
Join Date: Dec 2006
Location: GSM WORLD
Posts: 3,295
Member: 412843
Status: Offline
Sonork: 100.1604902
Thanks Meter: 497
Donate money to this user
Quote:
Originally Posted by kothamamun View Post
no need replace emmc just make partition and write dum file and flash officiall firmware
phone will alive 100%
Sir Already Tried
But Fone Still Dead
Even Flashed With USB In Brom Mode With Other Tool
  Reply With Quote
Old 02-02-2020, 08:42   #12 (permalink)
Major Poster
 
Join Date: Aug 2015
Posts: 50
Member: 2442914
Status: Offline
Thanks Meter: 9
change emmmc new,.. fix very bad .... the fix will only solve the problem ... when bad sectors come up the logo will hang
  Reply With Quote
Old 02-02-2020, 09:49   #13 (permalink)
No Life Poster
 
shoaibrao's Avatar
 
Join Date: Dec 2006
Location: GSM WORLD
Posts: 3,295
Member: 412843
Status: Offline
Sonork: 100.1604902
Thanks Meter: 497
Donate money to this user
Quote:
Originally Posted by hitech care View Post
Post Read Info Full Log With Plus Module I Will Check N Try To Help U..Few Days Back I Did Same Handset Boot Repair
Sir Here Is Info After Repaired With Easy Jtag Plus

Code:
EasyJTAG Box Firmware = 2.50
Setting interface to EasyJtag2/ISP_HiPower
Setting bus width to 1 Bit
HiPower mode is ON
Setting frequence to 36 MHz
CMD Pullup Level: 1824 mV
CMD Active Level: 1876 mV
eMMC Init returned = 0
EMMC Device Information :
EMMC CID: 90014A484347386134A408282905B4AB
EMMC CSD: D02701328F5903FFFFFFFFEF8A400027
EMMC Manufacture : SKHYNIX , EMMC NAME: HCG8a4 , HEX: 484347386134 , S/N: 08282905 , rev. 0xA4
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 11/2017
EMMC ROM 1 (Main User Data) Capacity: 59640 MB (000E8F800000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 60 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: HCG8a4_08282905_20200130_212212.extcsd
EMMC Init completed.
 
Scanning soft partitions
GPT header is found and is valid
Partition: boot_para, [000000008000 - 000000108000], size: 000000100000 (1.00 MB)
Partition: recovery, [000000108000 - 000004108000], size: 000004000000 (64.0 MB)
Partition: para, [000004108000 - 000004188000], size: 000000080000 (512. KB)
Partition: reserve1, [000004188000 - 000004388000], size: 000000200000 (2.00 MB)
Partition: reserve2, [000004388000 - 000005388000], size: 000001000000 (16.0 MB)
Partition: reserve3, [000005388000 - 000005588000], size: 000000200000 (2.00 MB)
Partition: reserve4, [000005588000 - 000006588000], size: 000001000000 (16.0 MB)
Partition: reserve_exp1, [000006588000 - 000006788000], size: 000000200000 (2.00 MB)
Partition: oppo_custom, [000006788000 - 000006888000], size: 000000100000 (1.00 MB)
Partition: expdb, [000006888000 - 000007C88000], size: 000001400000 (20.0 MB)
Partition: frp, [000007C88000 - 000007D88000], size: 000000100000 (1.00 MB)
PM> Partition: nvcfg, [000007D88000 - 000009D88000], size: 000002000000 (32.0 MB)
PM> Partition: nvdata, [000009D88000 - 00000DD88000], size: 000004000000 (64.0 MB)
PM> Partition: metadata, [00000DD88000 - 00000FD88000], size: 000002000000 (32.0 MB)
PM> Partition: protect1, [00000FD88000 - 000010588000], size: 000000800000 (8.00 MB)
PM> Partition: protect2, [000010588000 - 000011000000], size: 000000A78000 (10.4 MB)
Partition: seccfg, [000011000000 - 000011800000], size: 000000800000 (8.00 MB)
Partition: persist, [000011800000 - 000014800000], size: 000003000000 (48.0 MB)
Partition: sec1, [000014800000 - 000014A00000], size: 000000200000 (2.00 MB)
Partition: proinfo, [000014A00000 - 000014D00000], size: 000000300000 (3.00 MB)
Partition: md1img, [000014D00000 - 00001B100000], size: 000006400000 (100. MB)
Partition: spmfw, [00001B100000 - 00001B200000], size: 000000100000 (1.00 MB)
Partition: scp1, [00001B200000 - 00001B800000], size: 000000600000 (6.00 MB)
Partition: scp2, [00001B800000 - 00001BE00000], size: 000000600000 (6.00 MB)
Partition: sspm_1, [00001BE00000 - 00001BF00000], size: 000000100000 (1.00 MB)
Partition: sspm_2, [00001BF00000 - 00001C000000], size: 000000100000 (1.00 MB)
Partition: cam_vpu1, [00001C000000 - 00001CF00000], size: 000000F00000 (15.0 MB)
Partition: cam_vpu2, [00001CF00000 - 00001DE00000], size: 000000F00000 (15.0 MB)
Partition: cam_vpu3, [00001DE00000 - 00001ED00000], size: 000000F00000 (15.0 MB)
Partition: gz1, [00001ED00000 - 00001FD00000], size: 000001000000 (16.0 MB)
Partition: gz2, [00001FD00000 - 000020D00000], size: 000001000000 (16.0 MB)
Partition: nvram, [000020D00000 - 000024D00000], size: 000004000000 (64.0 MB)
Partition: lk, [000024D00000 - 000025200000], size: 000000500000 (5.00 MB)
Partition: lk2, [000025200000 - 000025700000], size: 000000500000 (5.00 MB)
Partition: boot, [000025700000 - 000027700000], size: 000002000000 (32.0 MB)
Partition: logo, [000027700000 - 000028700000], size: 000001000000 (16.0 MB)
Partition: odmdtbo, [000028700000 - 000029700000], size: 000001000000 (16.0 MB)
Partition: tee1, [000029700000 - 000029C00000], size: 000000500000 (5.00 MB)
Partition: tee2, [000029C00000 - 00002A800000], size: 000000C00000 (12.0 MB)
Partition: odm, [00002A800000 - 00003A800000], size: 000010000000 (256. MB)
Partition: vendor, [00003A800000 - 00008D800000], size: 000053000000 (1.30 GB)
Partition: system, [00008D800000 - 00019A800000], size: 00010D000000 (4.20 GB)
Partition: cache, [00019A800000 - 0001B5800000], size: 00001B000000 (432. MB)
Partition: userdata, [0001B5800000 - 000E8BCFBE00], size: 000CD64FBE00 (51.3 GB)
Partition: otp, [000E8BCFBE00 - 000E8E7FBE00], size: 000002B00000 (43.0 MB)
Partition: flashinfo, [000E8E7FBE00 - 000E8F7FBE00], size: 000001000000 (16.0 MB)
GPT header successfully parsed
 
Get firmware version

Manufacturer = OPPO
CPU Abi = arm64-v8a
Android release = 8.1.0
Brand = OPPO
Device = CPH1819
CPH1819Firmware version = CPH1819EX_11_A.38
Firmware date = Mon Oct 28 11:14:00 CST 2019
  Reply With Quote
Old 02-02-2020, 21:50   #14 (permalink)
Freak Poster
 
Join Date: Oct 2016
Location: india
Posts: 336
Member: 2636476
Status: Offline
Thanks Meter: 61
After repair emmc show smart report also
  Reply With Quote
Old 02-04-2020, 07:56   #15 (permalink)
No Life Poster
 
shoaibrao's Avatar
 
Join Date: Dec 2006
Location: GSM WORLD
Posts: 3,295
Member: 412843
Status: Offline
Sonork: 100.1604902
Thanks Meter: 497
Donate money to this user
Quote:
Originally Posted by coderinside View Post
After repair emmc show smart report also
Here Is
Code:
Operation: Changing GP sizes (final write) ...
 
GP1 size: 0 MB , WR_REL: 1 , ENH 1
GP2 size: 0 MB , WR_REL: 1 , ENH 1
GP3 size: 0 MB , WR_REL: 1 , ENH 1
GP4 size: 0 MB , WR_REL: 1 , ENH 1

Zero sizes. This may damage your eMMC
Do you want to continue?
 
Successfully
 
Reconnect all eMMC Lines [POWER, CMD, CLK, DAT0] to finalize operation

After reconnect, make sure that the size of ROM1 has been changed.
Code:
Operation: Reading S.M.A.R.T Report ...
 
Device Life Time Estimation (MLC) [269]: 0x01   0% - 10% device life time used
Device Life Time Estimation (SLC) [268]: 0x01   0% - 10% device life time used
Pre EOL information [267]: 0x01   Normal
 
Optimal Read Size [266]: 0x40   256 KB
Optimal Write Size [265]: 0x40   256 KB
Optimal Trim Unit Size [264]: 0x07   28 KB
  Reply With Quote
The Following User Says Thank You to shoaibrao For This Useful Post:
Reply

Bookmarks

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 



All times are GMT +1. The time now is 00:00.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.34056 seconds with 8 queries

SEO by vBSEO