Klmag2we4a-a002

[ramex]

Are Easy JTAG support Flash KLMAG2WE4A - A002..?
because I tried several time still unsuccessful..
here is log

Z3X EasyJtag Software ver. 2.0.0.0
Loading eMMC Addon Firmware... IO: 1800 mV
Box S/N: 07009004XXXXXXXX, ,FW Ver.: 01.52
CMD Pullup Level:1660 mV
CMD Active Level:1753 mV
Can't init device, Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD]
Done.

br,

ramex

[pai_d]

please check Pinout for correctness.
it should connect if EMMC is good.

i give you a reverence.

[jackjuntak]

Originally Posted by pai_d

please check Pinout for correctness.
it should connect if EMMC is good.

i give you a reverence.

Hi Paid...fr indonesia right?i am too..btw, could You explain in that datasheet table above what is the other name for vcc and vccq? coz, i did not find find vcc n vccq at table list given..need inform plz...

if You don't mind, plz share pic like above for 162 balls emmc.



Br,

[pai_d]

• CLK : Clock input
• CMD : A bidirectional signal used for device initialization and command transfers.
• DAT0-7 : Bidirectional data channels. It operates in push-pull mode.
• RST_n : H/W reset signal pin
• VDDF(VCC) : Supply voltage for flash memory
• VDD(VCCQ) : Supply voltage for memory controller
• VDDi : Internal power node to stabilize regulator output to controller core logics
• VSS : Ground connections
• RFU : Reserved for future use , do not use for any usage

Pay attentions to VDD(VccQ), VDDF(Vcc), VSS(gnd).
maybe you have to connect each all pin together.!

[jackjuntak]

Originally Posted by pai_d

• CLK : Clock input
• CMD : A bidirectional signal used for device initialization and command transfers.
• DAT0-7 : Bidirectional data channels. It operates in push-pull mode.
• RST_n : H/W reset signal pin
• VDDF(VCC) : Supply voltage for flash memory
• VDD(VCCQ) : Supply voltage for memory controller
• VDDi : Internal power node to stabilize regulator output to controller core logics
• VSS : Ground connections
• RFU : Reserved for future use , do not use for any usage

Pay attentions to VDD(VccQ), VDDF(Vcc), VSS(gnd).
maybe you have to connect each all pin together.!

verygreatfull pai..you did awesome things to me...

but, another question i asked there..plz, share 162 balls emmc pic including table as the example you gave..




Br,

[aZimBahar]

Does anyone know KLMAG2WE4A-A002 TP ?

[BABAK NURI]

Originally Posted by ..::One-Man::..

Does anyone know KLMAG2WE4A-A002 TP ?

Hi
Check Installed easy jtag Folder for which Photo is exact with your eMMC then use it