samsung i9300 after repair emmc phone dead - GSM-Forum

probir telecom · 09-14-2014, 08:34

hi
i9300 it was hang on logo and in odin mode it was blank display and not detect in pc. i tried with emmc repair after write its dead. plz help me.

here is log :

Quote:

Z3X EasyJtag Software ver. 1.6.0.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 0CFFB00893, ,FW Ver.: 01.50
CMD Pullup Level:1185 mV
CMD Active Level:1567 mV
eMMC Device Information
EMMC CID : 110100303136473932309F4E740D606E
EMMC CSD : D00E00320F5903FFFFFFFFEF92400044
EMMC Manufacturer ID: 0011 , OEM ID: 0100
EMMC Date: 06/2013 Rev.0x30
EMMC NAME: 016G92 , S/N: 2672718861
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 kB
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: 016G92_2672718861_20140800_1312.extcsd
Done.
Running:SAMSUNG: MoviNAND Reset + Format...

Z3X EasyJtag Software ver. 1.6.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1185 mV
CMD Active Level:1567 mV
ERROR: This eMMC are not Samsung!
Done!
extCSD file...C:\Program Files\Z3X\EASYJTAG\Backups\016G92_2672718861_20140 800_1310.extcsd
Running:Repair extCSD...

Z3X EasyJtag Software ver. 1.6.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1185 mV
CMD Active Level:1567 mV
Writing...
Done!
Done.
Please don't forget to repair extCSD from backup!!!

Z3X EasyJtag Software ver. 1.6.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1185 mV
CMD Active Level:1567 mV
Input file : E:\Z3x\jtag\Emmc dump\I9300\EMMC_ROM2_2Mb_BOOT\EMMC_ROM2_00000000_0 0200000.bin
Writing 000000200000 bytes to 00000000 ...ROM2 (BOOT1 ROM)
Write Speed: 1067 kB/s
Done !!!

Z3X EasyJtag Software ver. 1.6.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1185 mV
CMD Active Level:1567 mV
Input file : E:\Z3x\jtag\Emmc dump\I9300\EMMC_ROM1_512Mb_USER\EMMC_ROM1_00000000 _20000000.bin
Writing 000020000000 bytes to 00000000 ...ROM1 (USER ROM)
Write Speed: 6350 kB/s
Done !!!

now phone is dead

plz sugest me .
thanks

rasheedc007 · 09-15-2014, 09:17

chek clk resister .thats fuse maybe desoldering time shake.just short then chek..........

probir telecom · 09-21-2014, 08:35

The main problem is here :

EMMC Date: 06/2013 Rev.0x30
EMMC NAME: 016G92 , S/N: 2672718861
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB

2nd is:

Running:SAMSUNG: MoviNAND Reset + Format...

Z3X EasyJtag Software ver. 1.6.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1185 mV
CMD Active Level:1567 mV
ERROR: This eMMC are not Samsung!
Done!

but rom 1 rom 2 has written, after that phone dead.

dear members have any idea about this problem plz share with me .

ifactoryunlocked · 09-21-2014, 18:26

select advanced options

select SAMSUNG: VTU00M Name "00000" Repair

after select UNİVERSAL: Repair extCSD to select first backup

after rom2 write

probir telecom · 09-25-2014, 08:23

Quote:

Originally Posted by ifactoryunlocked

select advanced options

select SAMSUNG: VTU00M Name "00000" Repair

after select UNİVERSAL: Repair extCSD to select first backup

after rom2 write

when i try this its showing this emmc is not samsung emmc.

psytr0nic · 09-25-2014, 12:10

a normal Log

Quote:

EMMC NAME: VTU00M , S/N: 921189815
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB normal
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB Normal
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB

your Log

Quote:

EMMC NAME: 016G92 , S/N: 2672718861
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB wrong
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB wrong

Go to Advanced Option do : VTUM 0000 Repair / format and reset and back to do Set i9300/i7100 Config boot !

probir telecom · 09-30-2014, 07:40

what i m trying to do always asking this is not samsung emmc

drjaved_akhter · 10-01-2014, 15:49

Quote:

Originally Posted by probir telecom

what i m trying to do always asking this is not samsung emmc

this emmc not repaired in easy jtag.you replced this.
or try to resize boot1 and 2 2mb if this posibale then write rom1 and rom2

09-15-2014, 09:17	#2 (permalink)
rasheedc007 No Life Poster Join Date: Feb 2010 Location: india. kerala. Posts: 1,539 Member: 1245320 Status: Offline Sonork: 100.1612126 Thanks Meter: 140	chek clk resister .thats fuse maybe desoldering time shake.just short then chek..........

09-21-2014, 08:35	#3 (permalink)
probir telecom Major Poster Join Date: Jul 2007 Location: anywhere Posts: 45 Member: 546769 Status: Offline Sonork: 100.1603791 Thanks Meter: 2	The main problem is here : EMMC Date: 06/2013 Rev.0x30 EMMC NAME: 016G92 , S/N: 2672718861 EMMC ROM1 (Main User Data) Capacity: 15028 MB EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB 2nd is: Running:SAMSUNG: MoviNAND Reset + Format... Z3X EasyJtag Software ver. 1.6.0.0 Skip loading eMMC Addon Firmware CMD Pullup Level:1185 mV CMD Active Level:1567 mV ERROR: This eMMC are not Samsung! Done! but rom 1 rom 2 has written, after that phone dead. dear members have any idea about this problem plz share with me .

09-21-2014, 18:26	#4 (permalink)
ifactoryunlocked Freak Poster Join Date: Oct 2012 Location: TURKEY Posts: 379 Member: 1823773 Status: Offline Sonork: 100.1622605 Thanks Meter: 97	select advanced options select SAMSUNG: VTU00M Name "00000" Repair after select UNİVERSAL: Repair extCSD to select first backup after rom2 write

09-30-2014, 07:40	#7 (permalink)
probir telecom Major Poster Join Date: Jul 2007 Location: anywhere Posts: 45 Member: 546769 Status: Offline Sonork: 100.1603791 Thanks Meter: 2	what i m trying to do always asking this is not samsung emmc