A546e mdm still locked [Answered] - GSM-Forum

blackorder19 · 09-12-2023, 15:10

Work ID: 00000000018ED720
Starting Unlock MDM (Apr.2023)
Selected model: SM-A546E
Make factory data reset and connect the phone on first page of activation stage to PC via USB.
Input device IMEI and serial number
Phone must be in Setup Wizard mode
Input IMEI: 356080128016674
Input SN: RRCW402RKVF
Connecting to server...
Username: blackorder19
Your balance: 100 credits
Sending device information..
OK
Choose unlock method!
QR code method choosen!
Follow these steps :
1. In Android Setup Wizard mode tap on the blank space 6 times.
2. Scan this QR code to install MDM Guard service on your device.
3. Connect to Wi-Fi.
4. Follow the instructions on the screen.
5. Allow USB debugging mode when prompt appears on the screen.
Searching ADB devices...
Press "OK" button on the device to allow USB debugging
OK
QR Code is scanned
Reading info...
Detected model: SM-A546E
Fingerprint: samsung/a54xnsxx/a54x:13/TP1A.220624.014/A546EXXU5AWGJ:user/release-keys
Firmware compiled date: Tue Aug 1 10:57:49 +07 2023
PDA version: A546EXXU5AWGJ
CSC version: A546EOLE5AWGJ
SW version: A546EXXU5AWGK
Build number: QB24701506
Phone SN: RRCW402RKVF
Android version: 13 (TP1A.220624.014)
Sales code: XID
Carrier Id: XID
Country: INDONESIA
HW platform: s5e8835
HW Chip: erd8835
HW Modem: REV0.4
Security patch level: 2023-08-01
Warranty Void: 0
Codename: a54xnsxx
SIM 1 status: ABSENT
SIM 2 status: ABSENT
Modem board: SHANNON5318AP
Your account will be charged for 100 credits. Do you want to continue?
Starting exploit...
Activating service...
High Security Patch detected! In order for MDM Guard to work, the built-in lockscreen will be disabled on device (Equivalent to when None is installed instead of a swipe or password). But you can install third-party applications to emulate lockscreen. Do you want to continue?
MDM Guard service was activated.
Complete the Setup Wizard on the device.
MDM Guard service will restrict OTA updates on your device to prevent relock.
Warning: After rebooting the device, a MDM lock may appear. MDM Guard service will turn off the screen and the MDM lock will disappear. This may happen a few times after reboot.
Warning: If the phone doesn't receive calls when the screen is off, please open 'Help' and read software manual.
Unlock MDM (Apr.2023) done
Execution time 4 minute(s) 13 second(s)
Performed by 4.2.5.3 Software version.

Octopus box · 09-13-2023, 05:39

Hello.

Please, make a Factory Reset then repeat the operation and post here result.

blackorder19 · 09-13-2023, 10:06

yes do it but still relock after reboot

Octopus box · 09-13-2023, 10:17

Please make a video where we can see how the phone locks again after rebooting.

Then post here, we will check it.

blackorder19 · 09-13-2023, 15:08

okay i can sent in ur PM

blackorder19 · 09-16-2023, 11:59

still relock ,,i have 3 devices done unlock mdm but relocking after reboot

Octopus box · 09-18-2023, 05:15

Please, do Factory Reset then repeat Unlock MDM operation with latest software version 4.2.5.4

blackorder19 · 09-18-2023, 10:04

i tried but still same result

Octopus support · 09-18-2023, 10:24

Hello

We already working on this issue.

Please, wait a little, we will prepare test version for you.

cupon · 09-18-2023, 11:16

Quote:

Originally Posted by Octopus support

Hello

We already working on this issue.

Please, wait a little, we will prepare test version for you.

I have the same problem

Octopus support · 09-18-2023, 11:17

Hello

Quote:

cupon

Please, wait a little, we will inform you when we add some corrections

braulio890raul · 09-19-2023, 03:41

I'm also having the same problem.

Work ID: 00000000018F039C
Starting Unlock MDM (Apr.2023)
Selected model: SM-A235M
Make factory data reset and connect the phone on first page of activation stage to PC via USB.
Input device IMEI and serial number
Phone must be in Setup Wizard mode
Input IMEI: 35249878
Input SN: R58TA1
Connecting to server...
Username: braulio8
Your balance: 0 credits
Sending device information..
OK
Choose unlock method!
*#0*# (ADB) method choosen!
Searching modem port...
OK
Please wait...
Please type *#0*#. Wait until the HW Test screen appears. Then press 'Ok' to continue...
OK
Searching ADB devices...
Press "OK" button on the device to allow USB debugging
OK
Reading info...
Detected model: SM-A235M
Fingerprint: samsung/a23ub/a23:13/TP1A.220624.014/A235MUBU1BVL1:user/release-keys
Firmware compiled date: Wed Dec 7 08:49:19 KST 2022
PDA version: A235MUBU1BVL1
CSC version: A235MOWO1BVL1
SW version: A235MUBU1BVK6
Build number: 23331694
Phone SN: R58TA1C8CSR
Android version: 13 (TP1A.220624.014)
Sales code: TPA
Carrier Id: TPA
Country: PANAMA
HW platform: qcom
HW Chip: bengal
HW Modem: REV0.3
Security patch level: 2022-11-01
Warranty Void: 0
Codename: a23ub
SIM 1 status: ABSENT
SIM 2 status: ABSENT
Modem board: SM6225
Starting exploit...
Activating service...
Using method #1
MDM Guard service was activated.
Complete the Setup Wizard on the device.
MDM Guard service will restrict OTA updates on your device to prevent relock.
Unlock MDM (Apr.2023) done
Execution time 4 minute(s) 6 second(s)
Performed by 4.2.5.4 Software version.

Octopus support · 09-19-2023, 07:51

Hello

Quote:

braulio890raul

Please, chekc your PM!

braulio890raul · 09-21-2023, 08:17

Quote:

Originally Posted by Octopus support

Hello

Please, chekc your PM!

I checked the link and is not working.

Octopus support · 09-21-2023, 09:39

Hello

Please, contact us in Telegram we will send you version directly

Telegram: (https://t.me/Octoplus_Support)

09-12-2023, 15:10	#1 (permalink)
blackorder19 Major Poster Join Date: Jun 2023 Location: kediri Posts: 40 Member: 3041173 Status: Offline Thanks Meter: 2	A546e mdm still locked [Answered] Work ID: 00000000018ED720 Starting Unlock MDM (Apr.2023) Selected model: SM-A546E Make factory data reset and connect the phone on first page of activation stage to PC via USB. Input device IMEI and serial number Phone must be in Setup Wizard mode Input IMEI: 356080128016674 Input SN: RRCW402RKVF Connecting to server... Username: blackorder19 Your balance: 100 credits Sending device information.. OK Choose unlock method! QR code method choosen! Follow these steps : 1. In Android Setup Wizard mode tap on the blank space 6 times. 2. Scan this QR code to install MDM Guard service on your device. 3. Connect to Wi-Fi. 4. Follow the instructions on the screen. 5. Allow USB debugging mode when prompt appears on the screen. Searching ADB devices... Press "OK" button on the device to allow USB debugging OK QR Code is scanned Reading info... Detected model: SM-A546E Fingerprint: samsung/a54xnsxx/a54x:13/TP1A.220624.014/A546EXXU5AWGJ:user/release-keys Firmware compiled date: Tue Aug 1 10:57:49 +07 2023 PDA version: A546EXXU5AWGJ CSC version: A546EOLE5AWGJ SW version: A546EXXU5AWGK Build number: QB24701506 Phone SN: RRCW402RKVF Android version: 13 (TP1A.220624.014) Sales code: XID Carrier Id: XID Country: INDONESIA HW platform: s5e8835 HW Chip: erd8835 HW Modem: REV0.4 Security patch level: 2023-08-01 Warranty Void: 0 Codename: a54xnsxx SIM 1 status: ABSENT SIM 2 status: ABSENT Modem board: SHANNON5318AP Your account will be charged for 100 credits. Do you want to continue? Starting exploit... Activating service... High Security Patch detected! In order for MDM Guard to work, the built-in lockscreen will be disabled on device (Equivalent to when None is installed instead of a swipe or password). But you can install third-party applications to emulate lockscreen. Do you want to continue? MDM Guard service was activated. Complete the Setup Wizard on the device. MDM Guard service will restrict OTA updates on your device to prevent relock. Warning: After rebooting the device, a MDM lock may appear. MDM Guard service will turn off the screen and the MDM lock will disappear. This may happen a few times after reboot. Warning: If the phone doesn't receive calls when the screen is off, please open 'Help' and read software manual. Unlock MDM (Apr.2023) done Execution time 4 minute(s) 13 second(s) Performed by 4.2.5.3 Software version.

09-13-2023, 05:39	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,931 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,421	Hello. Please, make a Factory Reset then repeat the operation and post here result.

09-13-2023, 10:06	#3 (permalink)
blackorder19 Major Poster Join Date: Jun 2023 Location: kediri Posts: 40 Member: 3041173 Status: Offline Thanks Meter: 2	yes do it but still relock after reboot

09-13-2023, 10:17	#4 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,931 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,421	Please make a video where we can see how the phone locks again after rebooting. Then post here, we will check it.

09-13-2023, 15:08	#5 (permalink)
blackorder19 Major Poster Join Date: Jun 2023 Location: kediri Posts: 40 Member: 3041173 Status: Offline Thanks Meter: 2	okay i can sent in ur PM

09-16-2023, 11:59	#6 (permalink)
blackorder19 Major Poster Join Date: Jun 2023 Location: kediri Posts: 40 Member: 3041173 Status: Offline Thanks Meter: 2	still relock ,,i have 3 devices done unlock mdm but relocking after reboot

09-18-2023, 05:15	#7 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,931 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,421	Please, do Factory Reset then repeat Unlock MDM operation with latest software version 4.2.5.4

09-18-2023, 10:04	#8 (permalink)
blackorder19 Major Poster Join Date: Jun 2023 Location: kediri Posts: 40 Member: 3041173 Status: Offline Thanks Meter: 2	i tried but still same result

09-18-2023, 10:24	#9 (permalink)
Octopus support Product Supporter Join Date: Jan 2019 Location: USA, New York Posts: 10,216 Member: 2891705 Status: Offline Thanks Meter: 2,160	Hello We already working on this issue. Please, wait a little, we will prepare test version for you.

09-19-2023, 03:41	#12 (permalink)
braulio890raul Junior Member Join Date: Aug 2018 Location: Mexico Posts: 5 Member: 2860920 Status: Offline Thanks Meter: 1	I'm also having the same problem. Work ID: 00000000018F039C Starting Unlock MDM (Apr.2023) Selected model: SM-A235M Make factory data reset and connect the phone on first page of activation stage to PC via USB. Input device IMEI and serial number Phone must be in Setup Wizard mode Input IMEI: 35249878 Input SN: R58TA1 Connecting to server... Username: braulio8 Your balance: 0 credits Sending device information.. OK Choose unlock method! #0# (ADB) method choosen! Searching modem port... OK Please wait... Please type #0#. Wait until the HW Test screen appears. Then press 'Ok' to continue... OK Searching ADB devices... Press "OK" button on the device to allow USB debugging OK Reading info... Detected model: SM-A235M Fingerprint: samsung/a23ub/a23:13/TP1A.220624.014/A235MUBU1BVL1:user/release-keys Firmware compiled date: Wed Dec 7 08:49:19 KST 2022 PDA version: A235MUBU1BVL1 CSC version: A235MOWO1BVL1 SW version: A235MUBU1BVK6 Build number: 23331694 Phone SN: R58TA1C8CSR Android version: 13 (TP1A.220624.014) Sales code: TPA Carrier Id: TPA Country: PANAMA HW platform: qcom HW Chip: bengal HW Modem: REV0.3 Security patch level: 2022-11-01 Warranty Void: 0 Codename: a23ub SIM 1 status: ABSENT SIM 2 status: ABSENT Modem board: SM6225 Starting exploit... Activating service... Using method #1 MDM Guard service was activated. Complete the Setup Wizard on the device. MDM Guard service will restrict OTA updates on your device to prevent relock. Unlock MDM (Apr.2023) done Execution time 4 minute(s) 6 second(s) Performed by 4.2.5.4 Software version.

09-21-2023, 09:39	#15 (permalink)
Octopus support Product Supporter Join Date: Jan 2019 Location: USA, New York Posts: 10,216 Member: 2891705 Status: Offline Thanks Meter: 2,160	Hello Please, contact us in Telegram we will send you version directly Telegram: (https://t.me/Octoplus_Support)