G973U1 bit 4 read codes failed [Answered]
 

Welcome to Octoplus Box Samsung software version 3.0.1.9
Card S/N : 100003C97
-----------------------------------------------------------------------------------
Work ID: 00000000008FCA0D
Platform: Samsung Android
Selected port: COM147
Selected model: SM-G973U
Operation: Read Codes - General
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-G973U
Firmware compiled date: Tue Jun 16 19:13:36 KST 2020
PDA version: FA90_G973USQU4ATF1
CSC version: unknown
SW version: G973USQU4ATF1
Build number: 16121330
Phone SN: RF8M33AEY3N
Android version: 9 (PPR1.180610.011)
Sales code: unknown
Country: unknown
HW platform: msmnile
HW Chip: unknown
HW Modem: SM8150
Security patch level: 2019-01-01
Warranty Void: 0
SIM 1 status: absent
Codename: beyond1qltesq
"Devices with Unlock App (branded to T-Mobile, MetroPCS, etc.) are not supported!

Make sure device requests to enter unlock code and only then perform “Read Codes” operation!"

Continue?
Searching for USB diagnostic port...failed
Initializing exploit...OK
Initializing diagnostic port...OK
Searching for ADB device...
Can't kill external ADB references. Please, close all programs that use ADB server.OK
Initializing exploit...OK
Searching for USB diagnostic port...OK
Reading QCN:
Send SPC...OK
Reading mobile property...OK
Reading feature mask...OK
Reading roaming list 0...OK
Reading NV items...OK
Reading NV SIM1 items...OK
Reading NV SIM2 items...OK
Reading NV items...OK
Reading EFS...OK
Reading provisioning items...OK
Reading QCN done!
Backup saved as C:\Program Files (x86)\Octoplus\Octoplus_Samsung\BACKUP\QCN-SM-G973U-10-02-2021_10-02-11.qcn file
Connecting to server...OK
Checking smart card...OK
Username: levi280
Authorizing...OK
Checking balance...OK
Your balance: 430 credits.
Checking operation...OK
Initializing exploit...OK
Preparing phone..OK
Sending device information...OK
Preparing device for Uplode Mode...OK
Searching for device in Uploade Mode...OK
Reading Uplode Mode data...
Searching for signatures...OK
Searching for ADB device...OK
Initializing exploit...OK
Reseting MSL...OK
Phone will restart now. Please don't disconnect cable!
Rebooting phone...OK
Searching for ADB device...OK
Initializing exploit...OK
Bypassing security 1...OK
Phone will restart now. Please don't disconnect cable!
Rebooting phone...OK
Searching for ADB device...
Can't kill external ADB references. Please, close all programs that use ADB server.
Can't kill external ADB references. Please, close all programs that use ADB server.OK
Initializing exploit...OK
Bypassing security 2...OK
Searching for USB diagnostic port...failed
Initializing diagnostic port...OK
Searching for ADB device...
Please, press "OK" button on the phone to allow USB debugging.OK
Searching for USB diagnostic port...failed
Please type *#0808# enter code, goto "Qualcomm USB settings" and select "DM+MODEM+ADB"
Searching for USB diagnostic port...OK
Send SPC...OK
Writing QCN:
Writing NV items...OK
Writing NV SIM1 items...OK
Writing NV SIM2 items...OK
Wrting EFS...OK
Writing provisioning items...OK
Writing QCN done
Phone will restart now. Please don't disconnect cable!
Rebooting phone...OK
FREEZE: 7211 6640 0666 2116
NET LOCK: 8322 7751 1777 3227
SUB LOCK: 0000 0000 0000 0000
SP LOCK: 0000 0000 0000 0000
CP LOCK: 0000 0000 0000 0000
SIM LOCK: 0000 0000
Performed by 3.0.1.9 Software version.

all incorrect :/
phone show now: "SIM network PIN blocked. Enter SIM network PUK.
thanks.

Here are the codes put stock and put codes


Enviado desde mi iPhone utilizando Tapatalk

must stock to put codes?
now trying in combination mode.
all incorrect :/
phone show now: "SIM network PIN blocked. Enter SIM network PUK.
thanks.

Yes can try


Puk=freeze


Enviado desde mi iPhone utilizando Tapatalk

Hello.

Unfortunately, for T-Mobile devices Read codes operation is not supported.

but my phone no have unlock app, just ask code.
for that use your tool :/

how you know is TMB ?

flash stock G973U1UES4ETL1_G973U1OYM4ETL1_XAA
now phone not recognizing the SIM... and no ask for code

As we can see from the software log, you written combination file in order for the phone to start asking for codes, this method does not work for us and is not supported.

We watched it on our server.

What was the exact state of the phone before any operations were performed with it?

Also, what is original brand of network in the phone?

was ask code for region lock
sales code XAA