Galaxy note n7000 imei repair done
 

GALAXY NOTE N7000 IMEI REPAIR DONE

n7000 plz
 

[IMG]http://imageshack.us/a/img404/9083/1nzi.png[/IMG]Welcome to Octoplus/Octopus Box Samsung software version 1.4.4
-----------------------------------------------------------------------------------
To connect GT-N7000 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "PDA" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-N7000
Mode: Emergency
Write IMEI failed
-----------------------------------------------------------------------------------
Platform: Samsung Androidhttp://forum.gsmhosting.com/vbb/[IMG.../9083/1nzi.png[/IMG]
Selected port: COM1
Selected model: GT-N7000
Reading info, please wait...
Detected phone model: GT-N7000
Firmware compiled date: Tue Oct 4 04:48:28 KST 2011
PDA version: N7000XXKJ1
CSC version: Unknown
SW version: N7000XXLT3
Phone IMEI: 004999010640000
Phone SN: RF1C71QNHFK
Android version: 2.3.5 (GINGERBREAD)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-N7000
Mode: Emergency
Write IMEI failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-N7000
Reading info, please wait...
Detected phone model: GT-N7000
Firmware compiled date: Tue Oct 4 04:48:28 KST 2011
PDA version: N7000XXKJ1
CSC version: Unknown
SW version: N7000XXLT3
Phone IMEI: 004999010640000
Phone SN: RF1C71QNHFK
Android version: 2.3.5 (GINGERBREAD)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-N7000
Mode: Emergency
Write IMEI failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-N7000
Reading info, please wait...
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.

Platform: Samsung Android
Selected port: COM1
Selected model: GT-N7000
Reading info, please wait...
Detected phone model: GT-N7000
Firmware compiled date: Tue Oct 4 04:48:28 KST 2011
PDA version: N7000XXKJ1
CSC version: Unknown
SW version: N7000XXLT3
Phone IMEI: 004999010640000
Phone SN: RF1C71QNHFK
Android version: 2.3.5 (GINGERBREAD)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-N7000

Hello.
This error means You have not connected the device correctly. To connect GT-N7000 you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "PDA" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.

still same any idea sir

octopus team help
 

http://img20.imageshack.us/img20/5223/wl4u.pngWelcome to Octoplus/Octopus Box Samsung software version 1.4.4
-----------------------------------------------------------------------------------
To connect GT-I9100 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "PDA" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect GT-N7000 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "PDA" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-N7000
Reading info, please wait...
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-N7000
Reading info, please wait...
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.

Platform: Samsung Android
Selected port: COM1
Selected model: GT-N7000
Reading info, please wait...
Detected phone model: GT-N7000
Firmware compiled date: Mon Jun 24 19:06:11 KST 2013
PDA version: N7000ZSLR1
CSC version: N7000OZSLR1
SW version: N7000XXLT3
Phone IMEI: 004999010640000
Phone SN: RF1C71QNHFK
Android version: 4.1.2 (JZO54K)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-N7000
Mode: Emergency
Write IMEI failed
-----------------------------------------------------------------------------------
http://imageshack.us/photo/my-images/20/wl4u.png/

We will prepare test Software version, which performs "Repair IMEI"/"Unlock" operations via ADB, not via Diagnostic port. Please wait, this will occupy some time.

@ zarar

We have sent You test Software version to your PM. Please try to make "Repair IMEI" with this Software version and write the result here.

Dear Octopus / Octoplus Samsung tool developers,
Can you attach a same tool to me. I have one N7000 with damaged IMEI ( from who knows who ) and same behavior to test it...
WBR, DebeliaMark, BG

@ debeliamark

Yes, of course, please check your PM, we have sent You this test Software version also.

The SW is OK... but:


-----------------------------------------------------------------------------------
To connect GT-N7000 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "PDA" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM48
Selected model: GT-N7000
Detected phone model: GT-N7000
Firmware compiled date: Wed Jul 11 19:41:13 KST 2012
PDA version: N7000XXLRI
CSC version: N7000OXXLP8
SW version: Unknown
Phone IMEI: Unknown
Android version: 4.0.4 (IMM76D)
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as D:\Program Files (x86)\Octoplus\Octoplus_Samsung
\BACKUP\Security-GT-N7000-Unknown09-01-2014_12-03-21-.asec file
Cheking security type...
Old security type is detected
Old IMEI: Unknown
New IMEI: 353058-05-xxxxxx-8
Repairing IMEI ...
Executing exploit...

And stay here ...

As I see from this log, modem part is damaged in your phone or You have written unsuitable firmware:
At first, try to re-flash the phone with different firmwares and check whether modem is correct and only then perform "Repair IMEI" operation.

Welcome to Octoplus/Octopus Box Samsung software version 1.4.4
-----------------------------------------------------------------------------------
To connect GT-N7000 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "PDA" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM91
Selected model: GT-N7000
Detected phone model: GT-N7000
Firmware compiled date: Fri Nov 11 14:46:53 KST 2011
PDA version: N7000XXKKA
CSC version: N7000XENKK1
SW version: Unknown
Phone IMEI: Unknown
Android version: 2.3.6 (GINGERBREAD)
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as D:\Program Files (x86)\Octoplus\Octoplus_Samsung
\BACKUP\Security-GT-N7000-Unknown09-01-2014_16-53-15-.asec file
Cheking security type...
Old security type is detected
Old IMEI: Unknown
New IMEI: 353058-05-6xxxx8-8
Repairing IMEI ...
Executing exploit...

As I have said above, there is still problem with phone's modem part:
Please re-flash the phone with another firmwares (try 4.1.2) and check, whether modem is correct. If the problem will be the same with all firmwares, which You will test - this can be HW problem.

Phone was working, just so damaged frame - you know - there SGN loose metal painting very fast and come so ugly ... I have another board from phone with damaged PCB, but want to fit it in numbers on back sticker, just to avoid stupid questions when sale it. Do not think that will be a problem. I was use Octopus / Octoplus Samsung tool due to count less issues after Samsung Android phones EFS repair regarding other tools at me ( Z3x, SPT, NsPro, SGTool ) when catch it on WaveTek for testing after this. Anyway - will open it again - hope not damaged by mistake when assembling.

WBR, DebeliaMark, BG