Need Firmware full with PIT! GT-i9300

[Maurioski]

is why need, have a GT-I9300 16GB, and can flash, =/

Bienvenido en Octoplus/Octopus Box Samsung software versión 1.1.8
-----------------------------------------------------------------------------------
To connect GT-I9300 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Connect usb cable to phone.
6. Go to dial window.
7. Enter *#9090# number.
8. Set speed to 115200.
9. Reboot phone.
10. Press "Read Info" in software.
Seleccione el archivo de firmware: I9300BUALE6_I9300VFGALE6
_I9300BUALE6_HOME.oct
Please switch your phone to the download mode and connect it to a
PC.
To put GT-I9300 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
Firmware write started.
Please select firmware with PIT
Writing Firmware Failed

[FLIPOXP]

https://www.dropbox.com/s/xnifrn99vi...XEMC2_HOME.oct

and for root
https://www.dropbox.com/s/8hgpromd80...ot-SGS3-v6.oct

[Maurioski]

ty!! testing tomorrow =)

[Octopus box]

@ Maurioski

Most likely, the problem with phone's HW (with phone's flash chip). Try to write original firmware using original Samsung flasher. If the problem with creating phone's partitions will arise - this is HW problem.

[Maurioski]

Originally Posted by Octopus box

@ Maurioski

Most likely, the problem with phone's HW (with phone's flash chip). Try to write original firmware using original Samsung flasher. If the problem with creating phone's partitions will arise - this is HW problem.

y, is HW problem , look



Uploaded with ImageShack.us

is dead =/, can repair this?

[FLIPOXP]

check you baseband is correct?

[Maurioski]

Originally Posted by FLIPOXP

check you baseband is correct?

can't flash anithing,, ._.

[FLIPOXP]

https://www.dropbox.com/s/ikt0sdant4...20GT-I9300.oct

Try to flash this file .. a greeting

[Maurioski]

can't flash anything ....

[debeliamark]

Originally Posted by Maurioski

can't flash anything ....

Your phone say: PRODUCT NAME / empty /

This is because eMMC is damaged / wrong partitioned / ect... problems related to logical structure, sometime caused by flashing custom firmware. There till now no way to repartition this eMMC ( same situation and on SGSN2 N7100 ) in phone ( even you have still not dead phone ) and no JTAG.

3 ways to solve it:
1. If it's under warranty ( in mostly cases = MUST be still - EU warranty is 2 years! ) - give it to Samsung service centre - they will repair it ( exchange PCB ) for free.
2. If you find info HOW to make right partitions and fill some important data - then you can use any microSD card like eMMC or new / used / empty eMMC IC.
3. Buy from someone SGS3 ( i9300 ) eMMC IC - you will find here on forum some info about - and exchange it.

1 way to cover partialy costs:
1. Leave phone for parts and sell it - at least still combo LCD+Touch screen is expensive - near at 80% of second hand phone price ... - so sell also battery, charger ect ... you will get near 85 - 90% back.

WBR, DebeliaMark, Bulgaria

[Maurioski]

Originally Posted by debeliamark

Your phone say: PRODUCT NAME / empty /

This is because eMMC is damaged / wrong partitioned / ect... problems related to logical structure, sometime caused by flashing custom firmware. There till now no way to repartition this eMMC ( same situation and on SGSN2 N7100 ) in phone ( even you have still not dead phone ) and no JTAG.

3 ways to solve it:
1. If it's under warranty ( in mostly cases = MUST be still - EU warranty is 2 years! ) - give it to Samsung service centre - they will repair it ( exchange PCB ) for free.
2. If you find info HOW to make right partitions and fill some important data - then you can use any microSD card like eMMC or new / used / empty eMMC IC.
3. Buy from someone SGS3 ( i9300 ) eMMC IC - you will find here on forum some info about - and exchange it.

1 way to cover partialy costs:
1. Leave phone for parts and sell it - at least still combo LCD+Touch screen is expensive - near at 80% of second hand phone price ... - so sell also battery, charger ect ... you will get near 85 - 90% back.

WBR, DebeliaMark, Bulgaria

i know it, is dead =/

close!!!!

[tommy67911]

no need to try, emmc problem , replace emmc

[thanhhieunguyen]

give me the room I9300XXALE8_OLBALE5 VIETNAM full 4 file thanks a lot

[hasifkepm]

Originally Posted by debeliamark

Your phone say: PRODUCT NAME / empty /

This is because eMMC is damaged / wrong partitioned / ect... problems related to logical structure, sometime caused by flashing custom firmware. There till now no way to repartition this eMMC ( same situation and on SGSN2 N7100 ) in phone ( even you have still not dead phone ) and no JTAG.

3 ways to solve it:
1. If it's under warranty ( in mostly cases = MUST be still - EU warranty is 2 years! ) - give it to Samsung service centre - they will repair it ( exchange PCB ) for free.
2. If you find info HOW to make right partitions and fill some important data - then you can use any microSD card like eMMC or new / used / empty eMMC IC.
3. Buy from someone SGS3 ( i9300 ) eMMC IC - you will find here on forum some info about - and exchange it.

1 way to cover partialy costs:
1. Leave phone for parts and sell it - at least still combo LCD+Touch screen is expensive - near at 80% of second hand phone price ... - so sell also battery, charger ect ... you will get near 85 - 90% back.

WBR, DebeliaMark, Bulgaria

how to odin pit file formating