N975u read code failed [Answered]
N975u read code failed.
any way to unlock? Quote:
Welcome to Octoplus Samsung Software v.4.0.9.1
Work ID: 0000000001A031B3
Starting Read Info
Selected model: SM-N970U
Turn on USB debugging on the phone.
Connect powered-on phone to PC using USB via ADB.
Searching ADB devices...
Press "OK" button on the device to allow USB debugging
OK
Reading info...
Detected model: SM-N975U
Fingerprint: samsung/d2qsq/d2q:12/SP1A.210812.016/N975USQS7HVH1:user/release-keys
Firmware compiled date: Thu Jul 28 11:51:45 KST 2022
PDA version: N975USQS7HVH1
CSC version: N975UOYN7HVH1
SW version: N975USQS7HVH1
Build number: 22600524
Phone SN: R38MA09LT9W
Android version: 12 (SP1A.210812.016)
Sales code: ATT
Carrier Id: ATT
Country: USA
HW platform: qcom
HW Chip: msmnile
HW Modem: REV1.0
Security patch level: 2022-08-01
Warranty Void: 0
Codename: d2qsq
SIM 1 status: ABSENT
SIM 2 status: ABSENT
Modem board: SM8150
Read Info done
Execution time 5 second(s)
Performed by 4.0.9.1 Software version.
Work ID: 0000000001A0B86A
Starting Read Codes (Jul.2021)
Selected model: SM-N970U
Please, make sure Credit Server Credentials are set.
Read Codes (Jul.2021) failed
Execution time 5 second(s)
Performed by 4.0.9.1 Software version.
Loading account information..
Your balance: 100 credit(s)
Work ID: 0000000001CB7F06
Starting Read Codes (Jul.2021)
Selected model: SM-N970U
Turn on USB debugging on the phone.
Connect powered-on phone to PC using USB via ADB.
Please, don't run any other third party Softwares or start any other operations which can use your CPU/RAM resources during the operation!
Devices with Unlock App (branded to T-Mobile, MetroPCS, etc.) are not supported! Make sure device requests to enter unlock code and only then perform "Read Codes" operation! Do you want to continue?
Searching ADB devices...
Press "OK" button on the device to allow USB debugging
OK
Reading info...
Detected model: SM-N975U
Fingerprint: samsung/d2qsq/d2q:12/SP1A.210812.016/N975USQS7HVH1:user/release-keys
Firmware compiled date: Thu Jul 28 11:51:45 KST 2022
PDA version: N975USQS7HVH1
CSC version: N975UOYN7HVH1
SW version: N975USQS7HVH1
Build number: 22600524
Phone SN: R38MA09LT9W
Android version: 12 (SP1A.210812.016)
Sales code: ATT
Carrier Id: ATT
Country: USA
HW platform: qcom
HW Chip: msmnile
HW Modem: REV1.0
Security patch level: 2022-08-01
Warranty Void: 0
Codename: d2qsq
SIM 1 status: ABSENT
SIM 2 status: ABSENT
Modem board: SM8150
Rebooting device...
OK
Searching ADB devices...
OK
Rebooting device...
OK
Searching ADB devices...
OK
Connecting to server...
Username: rumenshom
Your balance: 100 credits
Searching modem port...
Please type *#0808# or ##3424# on your phone and select 'DM + MODEM + ADB'. After that press 'Ok' to continue operation... *Phone's dialog window may not appear, in that case ignore this step
Searching modem port...
OK
Starting exploit...
Rebooting device to Upload Mode...
Searching upload mode interface...
Not found
Read Codes (Jul.2021) failed
Execution time 5 minute(s) 33 second(s)
Performed by 4.0.9.1 Software version.
Work ID: 0000000001A03373
Starting Read Codes (Jul.2021)
Selected model: SM-N970U
Turn on USB debugging on the phone.
Connect powered-on phone to PC using USB via ADB.
Please, don't run any other third party Softwares or start any other operations which can use your CPU/RAM resources during the operation!
Devices with Unlock App (branded to T-Mobile, MetroPCS, etc.) are not supported! Make sure device requests to enter unlock code and only then perform "Read Codes" operation! Do you want to continue?
Searching ADB devices...
Press "OK" button on the device to allow USB debugging
OK
Reading info...
Detected model: SM-N975U
Fingerprint: samsung/d2qsq/d2q:12/SP1A.210812.016/N975USQS7HVH1:user/release-keys
Firmware compiled date: Thu Jul 28 11:51:45 KST 2022
PDA version: N975USQS7HVH1
CSC version: N975UOYN7HVH1
SW version: N975USQS7HVH1
Build number: 22600524
Phone SN: R38MA09LT9W
Android version: 12 (SP1A.210812.016)
Sales code: ATT
Carrier Id: ATT
Country: USA
HW platform: qcom
HW Chip: msmnile
HW Modem: REV1.0
Security patch level: 2022-08-01
Warranty Void: 0
Codename: d2qsq
SIM 1 status: ABSENT
SIM 2 status: ABSENT
Modem board: SM8150
Rebooting device...
OK
Searching ADB devices...
Device didn't load after 45 seconds. Trying to connect.
OK
Connecting to server...
Username: rumenshom
Your balance: 100 credits
Searching modem port...
OK
Starting exploit...
Rebooting device to Upload Mode...
Searching upload mode interface...
Not found
Read Codes (Jul.2021) failed
Execution time 4 minute(s) 20 second(s)
Performed by 4.0.9.1 Software version.
Work ID: 0000000001A0BCE5
Starting Read Codes (Jul.2021)
Selected model: SM-N975U
Turn on USB debugging on the phone.
Connect powered-on phone to PC using USB via ADB.
Please, don't run any other third party Softwares or start any other operations which can use your CPU/RAM resources during the operation!
Devices with Unlock App (branded to T-Mobile, MetroPCS, etc.) are not supported! Make sure device requests to enter unlock code and only then perform "Read Codes" operation! Do you want to continue?
Searching ADB devices...
Press "OK" button on the device to allow USB debugging
OK
Reading info...
Detected model: SM-N975U
Fingerprint: samsung/d2qsq/d2q:12/SP1A.210812.016/N975USQS7HVH1:user/release-keys
Firmware compiled date: Thu Jul 28 11:51:45 KST 2022
PDA version: N975USQS7HVH1
CSC version: N975UOYN7HVH1
SW version: N975USQS7HVH1
Build number: 22600524
Phone SN: R38MA09LT9W
Android version: 12 (SP1A.210812.016)
Sales code: ATT
Carrier Id: ATT
Country: USA
HW platform: qcom
HW Chip: msmnile
HW Modem: REV1.0
Security patch level: 2022-08-01
Warranty Void: 0
Codename: d2qsq
SIM 1 status: ABSENT
SIM 2 status: ABSENT
Modem board: SM8150
Rebooting device...
OK
Searching ADB devices...
OK
Connecting to server...
Username: rumenshom
Could not connect to the server!
Read Codes (Jul.2021) failed
Execution time 1 minute(s) 34 second(s)
Performed by 4.0.9.1 Software version.
Connecting to remote service failed
Starting Read Codes (Jul.2021)
Selected model: SM-N975U
Turn on USB debugging on the phone.
Connect powered-on phone to PC using USB via ADB.
Please, don't run any other third party Softwares or start any other operations which can use your CPU/RAM resources during the operation!
Devices with Unlock App (branded to T-Mobile, MetroPCS, etc.) are not supported! Make sure device requests to enter unlock code and only then perform "Read Codes" operation! Do you want to continue?
Searching ADB devices...
Press "OK" button on the device to allow USB debugging
OK
Reading info...
Detected model: SM-N975U
Fingerprint: samsung/d2qsq/d2q:12/SP1A.210812.016/N975USQS7HVH1:user/release-keys
Firmware compiled date: Thu Jul 28 11:51:45 KST 2022
PDA version: N975USQS7HVH1
CSC version: N975UOYN7HVH1
SW version: N975USQS7HVH1
Build number: 22600524
Phone SN: R38MA09LT9W
Android version: 12 (SP1A.210812.016)
Sales code: ATT
Carrier Id: ATT
Country: USA
HW platform: qcom
HW Chip: msmnile
HW Modem: REV1.0
Security patch level: 2022-08-01
Warranty Void: 0
Codename: d2qsq
SIM 1 status: ABSENT
SIM 2 status: ABSENT
Modem board: SM8150
Rebooting device...
OK
Searching ADB devices...
OK
Connecting to server...
Username:
Your balance: 100 credits
Searching modem port...
OK
Starting exploit...
Rebooting device to Upload Mode...
Searching upload mode interface...
Not found
Read Codes (Jul.2021) failed
Execution time 4 minute(s) 45 second(s)
Performed by 4.0.9.1 Software version.
| | 