🐙 Octoplus/Octopus Box Samsung v.2.6.3 - Read codes for various Exynos devices 🐙

[Dulaljan]

Originally Posted by Octopus box

@ Dulaljan


Probably, this combination firmware is not compatible to your phone. Try to find and write another combination firmware. Also, please read this: http://forum.gsmhosting.com/vbb/f684...rrors-2189001/.

Thanks I download from easy firmware site it's combination file are in good working.

Please add J5 Pro (j530f) reset FRP/Reactivation options
thanks teams

[rajpootkhoaf]

Thnks Team after write securty i repeat unlock process its succesffuly unlocked and Network is ok






But i have a question after flash or reset mobile its not effect on its network ?
one more thing on mobile screen it showing Unauthorized actions have been detected

[Octopus box]

After writing firmware phone will remains unlocked.

[allumts]

@rajpootkhoaf

It's Definitive Unlock, you can flash/reset phone w/o problem.

for this:

Unauthorized actions have been detected

Not worry, is just a notify.

BR

[rajpootkhoaf]

Ok Thnks for ur support

[toninhosantos]

Originally Posted by srst16275

octopus team

Added "Read Cert" via Diag Port (KNOX must be 0, no root needed, no credits needed) operation for the following devices:

- SM-A520F, SM-A520K, SM-A520L, SM-A520S, SM-A520W
- SM-A720F

what About write cert ?????

Need write cert option in A520f

[gsm4supers]

Welcome to Octoplus Box Samsung software version 2.6.3
-----------------------------------------------------------------------------------
To connect SM-G928F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-A510F
Searching for UART interface.. COM42
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM42
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Searching for UART interface.. COM42
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock..unsuccessful
This version of "sBoot" is not supported, try to change "sBoot"!
Operation was failed!
Performed by 2.6.3 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-A510F
Searching for UART interface.. COM42
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM42
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Searching for UART interface.. COM42
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock..unsuccessful
This version of "sBoot" is not supported, try to change "sBoot"!
Operation was failed!
Performed by 2.6.3 Software version.
Selected AP file: D:\Smart Phones Software\Samsung\Roms By
SamMobile\SM-A510F\COMBINATION_FAC_FA51_A510FXXU4AQC1
\COMBINATION_FAC_FA51_A510FXXU4AQC1_FAC_CL9213193
_QB12832200_REV00_user_mid_noship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-A510F into Download Mode, You have to perform the
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Firmware writing successfully completed.
Performed by 2.6.3 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-A510F
Searching for a phone (waiting for ADB device)...timeout
Phone not found.
Operation was failed!
Performed by 2.6.3 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-A510F
Searching for UART interface..
Found more then one box connected to COM42 COM42
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface..
Found more then one box connected to COM42 COM42
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock..unsuccessful
This version of "sBoot" is not supported, try to change "sBoot"!
Operation was failed!
Performed by 2.6.3 Software version.
Selected AP file: D:\Smart Phones Software\Samsung\Roms By
SamMobile\SM-A510F\COMBINATION_FAC_FA51_A510FXXU4AQC1
\COMBINATION_FAC_FA51_A510FXXU4AQC1_FAC_CL9213193
_QB12832200_REV00_user_mid_noship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-A510F into Download Mode, You have to perform the
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing PERSDATA section...
PERSDATA section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Firmware writing successfully completed.
Performed by 2.6.3 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-A510F
Searching for a phone (waiting for ADB device)...
Reading info...
Detected phone model: SM-A510F
Firmware compiled date: Thu Mar 9 17:05:10 KST 2017
PDA version: FA51_A510FXXU4AQC1
CSC version: unknown
SW version: A510FXXU4AQC2
Phone SN: R58H11XJXNM
Android version: 5.1.1 (LMY47X)
Sales code: unknown
Country: unknown
HW platform: exynos5
HW Chip: exynos7580
HW Modem: SHANNON310
Security patch level: 2015-11-01
SIM 1 status: absent
SIM 2 status: absent
Codename: a5xeltexx
Resetting FRP lock..
FRP lock is successfully reseted!
Goto "Menu->Settings->Backup and reset" and make "Factory data
reset"
Performed by 2.6.3 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-A510F
Searching for UART interface..
Found more then one box connected to COM42 COM42
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface..
Found more then one box connected to COM42 COM42
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock..unsuccessful
This version of "sBoot" is not supported, try to change "sBoot"!
Operation was failed!
Performed by 2.6.3 Software version.
Selected AP file: D:\Smart Phones Software\Samsung\Roms By
SamMobile\SM-A510F\A510FXXS2BPG1_A510FOJV2BPG1_TUR_6.0.1
\A510FXXS2BPG1_A510FOJV2BPG1_A510FXXU2BPFF_HOME.ta r.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-A510F into Download Mode, You have to perform the
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
Writing Firmware Failed
Performed by 2.6.3 Software version.
Selected AP file: D:\Smart Phones Software\Samsung\Roms By
SamMobile\SM-A510F\A510FXXS2BPG1_A510FOJV2BPG1_TUR_6.0.1
\A510FXXS2BPG1_A510FOJV2BPG1_A510FXXU2BPFF_HOME.ta r.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-A510F into Download Mode, You have to perform the
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing SYSTEM section...
Writing Firmware Failed
Performed by 2.6.3 Software version.
Selected AP file: D:\Smart Phones Software\Samsung\Roms By
SamMobile\SM-A510F\COMBINATION_FAC_FA51_A510FXXU4AQC1
\COMBINATION_FAC_FA51_A510FXXU4AQC1_FAC_CL9213193
_QB12832200_REV00_user_mid_noship.tar.md5
Operation was canceled
Selected AP file: D:\Smart Phones Software\Samsung\Roms By
SamMobile\SM-A510F\COMBINATION_FAC_FA51_A510FXXU4AQC1
\COMBINATION_FAC_FA51_A510FXXU4AQC1_FAC_CL9213193
_QB12832200_REV00_user_mid_noship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-A510F into Download Mode, You have to perform the
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing PERSDATA section...
PERSDATA section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Firmware writing successfully completed.
Performed by 2.6.3 Software version.

[allumts]

@gsm4supers

Why all these flash? you problem is only this by UART MODE:

This version of "sBoot" is not supported, try to change "sBoot"

Select one more Old version of FW, in "Advance Mode" ceck only "Sboot" and flash, then repeat FRP Remove in UART MODE, done.

Do all at you risk!!!!

[varalex]

Connecting to server..
Username: ********
Authorization..
Checking smart card...
Smart card successfully checked.
Checking balance..
Your balance: 58 credits.
Performed by 2.6.3 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM101
Selected model: SM-N950F
Searching for a phone. Please wait...
Found phone on COM101
Reading info...
Detected phone model: SM-N950F
HW Version: O2U
PDA version: N950FXXS1AQK9
CSC version: N950FOTF1AQH3
CP version: N950FXXU1AQHB
Phone SN: R58JA******
Phone IMEI: 352003-**-******-*
Searching for USB diagnostic port...OK
Connecting...OK
Reading HWID...OK
-----------------------------------------------------------------------------------
Connecting to server ..
Username: ********
Connect to server successfull.
Checking smart card...
Smart card successfully checked.
Your balance: 58 credits.
-----------------------------------------------------------------------------------
Reading NV Data...OK
To get unlock code you need to have 58 credits. Continue?
Sending request...OK
Calculating codes. Please wait...
FREEZE: 41752062
NET LOCK: 02681481
SUB LOCK: 00000000
SP LOCK: 00000000
CP LOCK: 00000000
SIM LOCK: 00000000
Performed by 2.6.3 Software version.

[RAJBHATIA]

Originally Posted by Octopus box

@ RAJBHATIA

Try to use combination firmwares from the Support Area. All combination firmwares, which we have at the moment are present on the Support Area.

Also, read this: http://forum.gsmhosting.com/vbb/f684...rrors-2189001/.

Octopus team Downloaded boot 7 file but showing its for N930t


Log file "C:\program files (x86)\octoplus\octoplus_samsung\LOG\18-12-2017_14-45-48.log" created (12/18/2017 2:45:50 PM).
INFO : 12/18/2017 2:46:01 PM > Set up system language English (file: English.ini)
INFO : 12/18/2017 2:46:01 PM > Welcome to Octoplus Box Samsung software version 2.6.3
INFO : 12/18/2017 2:55:37 PM > Selected firmware file: boot_G930T_7.0.oct
WARN : 12/18/2017 2:55:42 PM > Please put the phone into Download Mode and connect USB cable.
WARN : 12/18/2017 2:55:42 PM > To put SM-G930A into Download Mode, You have to perform the following steps:
WARN : 12/18/2017 2:55:42 PM > 1. Reconnect the battery.
WARN : 12/18/2017 2:55:42 PM > 2. Press and hold "Volume-" + "Home" + "Power ON" keys.
WARN : 12/18/2017 2:55:42 PM > 3. When phone turns on, press "Volume+" key.
INFO : 12/18/2017 2:55:42 PM > Found phone on
INFO : 12/18/2017 2:55:43 PM > Selected file is declared for SM-N910T model!
ERROR : 12/18/2017 2:55:43 PM > File has been created for a different phone model.
INFO : 12/18/2017 2:55:43 PM > Performed by 2.6.3 Software version.
INFO : 12/18/2017 2:56:28 PM > -----------------------------------------------------------------------------------
INFO : 12/18/2017 2:56:28 PM > To connect SM-G935T phone you have to perform the following steps:
INFO : 12/18/2017 2:56:28 PM > 1. Disconnect USB cable from phone.
INFO : 12/18/2017 2:56:28 PM > 2. Go to Menu->Settings->More->About Device.
INFO : 12/18/2017 2:56:28 PM > 3.Tap on "Build number" 7 times to enable developer options.
INFO : 12/18/2017 2:56:28 PM > 4. Go to Menu->Settings->More->Developer options.
INFO : 12/18/2017 2:56:28 PM > 5. Turn on "USB Debugging" option.
WARN : 12/18/2017 2:56:34 PM > Please put the phone into Download Mode and connect USB cable.
WARN : 12/18/2017 2:56:34 PM > To put SM-G935T into Download Mode, You have to perform the following steps:
WARN : 12/18/2017 2:56:34 PM > 1. Reconnect the battery.
WARN : 12/18/2017 2:56:34 PM > 2. Press and hold "Volume-" + "Home" + "Power ON" keys.
WARN : 12/18/2017 2:56:34 PM > 3. When phone turns on, press "Volume+" key.
INFO : 12/18/2017 2:56:43 PM > Found phone on
INFO : 12/18/2017 2:56:43 PM > Selected file is declared for SM-N910T model!
ERROR : 12/18/2017 2:56:43 PM > File has been created for a different phone model.
INFO : 12/18/2017 2:56:43 PM > Performed by 2.6.3 Software version.

[allumts]

@RAJBHATIA

Loock carefully in "Support Area" for Right "Combination", no there are 7 Boot file but only 2 Easy "Combination":

1) COMBINATION_FA60_G930AUCU4AQE5_CL7396706_QB1361996 3_REV02_user_mid_noship_MULTI_CERT.oct
2) COMBINATION_FA60_G930AUCU4AQG1_CL7396706_QB1429958 2_REV02.oct

Loock what Firmware version have in you phone and Download "Right" Combination!!!

Read Carefully this schema below and loock if one is compatible with you Firmware version:
http://forum.gsmhosting.com/vbb/f684...rrors-2189001/

[Koler Gaan]

Platform: Samsung Android
Selected port: COM15
Selected model: SM-G925T
Please put the phone into Download Mode and connect USB cable.
Waiting for phone...
Reading PIT...
PIT was read successfully.
Searching for UART interface.. COM15
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP / Reactivation lock is successfully reseted!
Performed by 2.6.3 Software version.

[RAJBHATIA]

Originally Posted by allumts

@RAJBHATIA

Loock carefully in "Support Area" for Right "Combination", no there are 7 Boot file but only 2 Easy "Combination":


Loock what Firmware version have in you phone and Download "Right" Combination!!!

Read Carefully this schema below and loock if one is compatible with you Firmware version:
http://forum.gsmhosting.com/vbb/f684...rrors-2189001/

Hi, Octopus team can you please upload a firmware & related combination file for 7 version For G930A & G930T?
Help will be appreciated

[zultopo]

nice update octupos team

[apah richie]

Please octoplus team I just purchased my octoplus box when I lunch any of the software they said i should register I don't know what to do. Please can you give me directory

Sent from my SM-N900K using Tapatalk