Post here success stories with Octoplus Box Samsung Software (2018-2023)

[Dr_Wolodya]

SM-G973U (bit3) Read codes successfully done w/out root and w/out tripping KNOX:

WorkID: 0007C345
Platform: Samsung Android
Selected port: COM37
Selected model: SM-G973U
Operation: Read Codes - General
Detected phone model: SM-G973U
Firmware compiled date: Wed Jan 29 14:31:39 KST 2020
PDA version: FA90_G973USQU3ATA2
CSC version: unknown
SW version: G973USQU3ATA2
Build number: 15005512
Phone SN: R38M20LK7SZ
Android version: 9 (PPR1.180610.011)
Sales code: unknown
Country: unknown
HW platform: msmnile
HW Chip: unknown
HW Modem: SM8150
Security patch level: 2019-01-01
Warranty Void: 0
SIM 1 status: absent
Codename: beyond1qltesq
"Devices with Unlock App (branded to T-Mobile, MetroPCS, etc.) are not supported!

Make sure device requests to enter unlock code and only then perform “Read Codes” operation!"

Continue?
Connecting to server...OK
Checking smart card...OK
Username: Dr_Volodya
Authorizing...OK
Checking balance...OK
Your balance: 231 credits.
Checking operation...OK
Initializing exploit...OK
Preparing phone..OK
Sending device information...OK
Preparing device for Uplode Mode...OK
Searching for device in Uplode Mode...OK
Reading Uplode Mode data...
Searching for signatures...OK
Searching for ADB device...OK
Initializing exploit...OK
Reseting MSL...OK
Phone will restart now. Please don't disconnect cable!
Rebooting phone...OK
Searching for ADB device...OK
Initializing exploit...OK
Bypassing security 1...OK
Phone will restart now. Please don't disconnect cable!
Rebooting phone...OK
Searching for ADB device...OK
Initializing exploit...OK
Bypassing security 2...OK
Phone will restart now. Please don't disconnect cable!
Rebooting phone...OK
FREEZE: 6500422299995004
NET LOCK: 8722644411117226
SUB LOCK: 0000000000000000
SP LOCK: 0000000000000000
CP LOCK: 0000000000000000
SIM LOCK: 00000000
Performed by 3.0.0.1 Software version.

[Dr_Wolodya]

Converting SM-G973U to unbranded version SM-G973U1.

Before:

Platform: Samsung Android
Selected port: COM37
Selected model: SM-G973U
Operation: Read info
Reading info, please wait...
Detected phone model: SM-G973U
Firmware compiled date: Tue Apr 21 11:07:20 KST 2020
PDA version: G973USQS3DTD5
CSC version: G973UOYN3DTD5
SW version: G973USQS3DTD5
Build number: 15687838
Phone SN: R38M20LK7SZ
Android version: 10 (QP1A.190711.020)
Sales code: ATT
Country: USA
HW platform: msmnile
HW Chip: unknown
HW Modem: SM8150
Security patch level: 2020-05-01
Warranty Void: 0
SIM 1 status: absent
Codename: beyond1qltesq
Initializing...failed
Performed by 3.0.0.1 Software version.

EToken Bypass:

WorkID: 00087DFD
Platform: Samsung Android
Selected port: COM37
Selected model: SM-G973U
Operation: EToken Bypass
Detected phone model: SM-G973U
Firmware compiled date: Tue Apr 21 11:07:20 KST 2020
PDA version: G973USQS3DTD5
CSC version: G973UOYN3DTD5
SW version: G973USQS3DTD5
Build number: 15687838
Phone SN: R38M20LK7SZ
Android version: 10 (QP1A.190711.020)
Sales code: ATT
Country: USA
HW platform: msmnile
HW Chip: unknown
HW Modem: SM8150
Security patch level: 2020-05-01
Warranty Void: 0
SIM 1 status: absent
Codename: beyond1qltesq
Connecting to server...
Connecting to server...Ok!
Checking resource files...
Resource files already downloaded.
Rebooting phone in Download Mode...
Waiting for phone...OK
Writing etoken section...OK
Successfully done
Performed by 3.0.0.1 Software version.

Writing combination:

INFO  : 08.10.2020 16:07:54 > Selected AP file: C:\1\g973u\COMBINATION_FAC_FA90_G973USQU3ATA2_FACFAC_CL15557854_QB28913106_REV00_user_mid_noship_MULTI_CERT.tar.md5
INFO  : 08.10.2020 16:07:58 > Operation was canceled
INFO  : 08.10.2020 16:08:03 > Selected AP file: C:\1\g973u\COMBINATION_FAC_FA90_G973USQU3ATA2_FACFAC_CL15557854_QB28913106_REV00_user_mid_noship_MULTI_CERT.tar.md5
WARN  : 08.10.2020 16:08:05 > Please put the phone into Download Mode and connect USB cable.
WARN  : 08.10.2020 16:08:05 > To put SM-G973U into Download Mode, You have to perform the following steps:
WARN  : 08.10.2020 16:08:05 > 1. Power off the phone.
WARN  : 08.10.2020 16:08:05 > 2. Press and hold "Volume-" + "Bixby" + "Power ON" keys.
WARN  : 08.10.2020 16:08:05 > 3. When phone turns on, press "Volume+" key.
INFO  : 08.10.2020 16:08:05 > Found phone on 
WARN  : 08.10.2020 16:08:05 > Advanced mode!
INFO  : 08.10.2020 16:08:06 > Firmware write started.
INFO  : 08.10.2020 16:08:07 > Writing ABL section...
INFO  : 08.10.2020 16:08:07 > ABL section has been written successfully.
INFO  : 08.10.2020 16:08:07 > Writing XBL section...
INFO  : 08.10.2020 16:08:07 > XBL section has been written successfully.
INFO  : 08.10.2020 16:08:07 > Writing XBL_CONFIG section...
INFO  : 08.10.2020 16:08:07 > XBL_CONFIG section has been written successfully.
INFO  : 08.10.2020 16:08:07 > Writing TZ section...
INFO  : 08.10.2020 16:08:07 > TZ section has been written successfully.
INFO  : 08.10.2020 16:08:07 > Writing HYP section...
INFO  : 08.10.2020 16:08:07 > HYP section has been written successfully.
INFO  : 08.10.2020 16:08:07 > Writing DEVCFG section...
INFO  : 08.10.2020 16:08:07 > DEVCFG section has been written successfully.
INFO  : 08.10.2020 16:08:07 > Writing AOP section...
INFO  : 08.10.2020 16:08:07 > AOP section has been written successfully.
INFO  : 08.10.2020 16:08:07 > Writing BKSECAPP section...
INFO  : 08.10.2020 16:08:08 > BKSECAPP section has been written successfully.
INFO  : 08.10.2020 16:08:08 > Writing CMNLIB section...
INFO  : 08.10.2020 16:08:08 > CMNLIB section has been written successfully.
INFO  : 08.10.2020 16:08:08 > Writing CMNLIB64 section...
INFO  : 08.10.2020 16:08:08 > CMNLIB64 section has been written successfully.
INFO  : 08.10.2020 16:08:08 > Writing KEYMASTER section...
INFO  : 08.10.2020 16:08:08 > KEYMASTER section has been written successfully.
INFO  : 08.10.2020 16:08:08 > Writing QUPFW section...
INFO  : 08.10.2020 16:08:08 > QUPFW section has been written successfully.
INFO  : 08.10.2020 16:08:08 > Writing SECDATA section...
INFO  : 08.10.2020 16:08:08 > SECDATA section has been written successfully.
INFO  : 08.10.2020 16:08:08 > Writing APDP section...
INFO  : 08.10.2020 16:08:08 > APDP section has been written successfully.
INFO  : 08.10.2020 16:08:08 > Writing MSADP section...
INFO  : 08.10.2020 16:08:08 > MSADP section has been written successfully.
INFO  : 08.10.2020 16:08:08 > Writing STORSEC section...
INFO  : 08.10.2020 16:08:08 > STORSEC section has been written successfully.
INFO  : 08.10.2020 16:08:08 > Writing UEFISECAPP section...
INFO  : 08.10.2020 16:08:08 > UEFISECAPP section has been written successfully.
INFO  : 08.10.2020 16:08:08 > Writing APNHLOS section...
INFO  : 08.10.2020 16:08:11 > APNHLOS section has been written successfully.
INFO  : 08.10.2020 16:08:11 > Writing MULTIIMGOEM section...
INFO  : 08.10.2020 16:08:11 > MULTIIMGOEM section has been written successfully.
INFO  : 08.10.2020 16:08:11 > Writing DSP section...
INFO  : 08.10.2020 16:08:14 > DSP section has been written successfully.
INFO  : 08.10.2020 16:08:14 > Writing TOOLSFV section...
INFO  : 08.10.2020 16:08:14 > TOOLSFV section has been written successfully.
INFO  : 08.10.2020 16:08:14 > Writing VBMETA section...
INFO  : 08.10.2020 16:08:14 > VBMETA section has been written successfully.
INFO  : 08.10.2020 16:08:14 > Writing VK section...
INFO  : 08.10.2020 16:08:14 > VK section has been written successfully.
INFO  : 08.10.2020 16:08:14 > Writing BOOT section...
INFO  : 08.10.2020 16:08:16 > BOOT section has been written successfully.
INFO  : 08.10.2020 16:08:16 > Writing RECOVERY section...
INFO  : 08.10.2020 16:08:20 > RECOVERY section has been written successfully.
INFO  : 08.10.2020 16:08:20 > Writing VENDOR section...
INFO  : 08.10.2020 16:08:57 > VENDOR section has been written successfully.
INFO  : 08.10.2020 16:08:57 > Writing SYSTEM section...
INFO  : 08.10.2020 16:10:18 > SYSTEM section has been written successfully.
INFO  : 08.10.2020 16:10:18 > Writing DTBO section...
INFO  : 08.10.2020 16:10:19 > DTBO section has been written successfully.
INFO  : 08.10.2020 16:10:19 > Writing PERSIST section...
INFO  : 08.10.2020 16:10:19 > PERSIST section has been written successfully.
INFO  : 08.10.2020 16:10:19 > Writing CARRIER section...
INFO  : 08.10.2020 16:10:19 > CARRIER section has been written successfully.
INFO  : 08.10.2020 16:10:19 > Writing DQMDBG section...
INFO  : 08.10.2020 16:10:19 > DQMDBG section has been written successfully.
INFO  : 08.10.2020 16:10:19 > Writing MODEM section...
INFO  : 08.10.2020 16:10:22 > MODEM section has been written successfully.
INFO  : 08.10.2020 16:10:22 > Writing CACHE section...
INFO  : 08.10.2020 16:10:23 > CACHE section has been written successfully.
INFO  : 08.10.2020 16:10:23 > Writing PRODUCT section...
INFO  : 08.10.2020 16:10:23 > PRODUCT section has been written successfully.
INFO  : 08.10.2020 16:10:23 > Writing USERDATA section...
INFO  : 08.10.2020 16:10:32 > USERDATA section has been written successfully.
INFO  : 08.10.2020 16:10:32 > Firmware writing successfully completed.

Info in combination:

Platform: Samsung Android
Selected port: COM37
Selected model: SM-G973U
Operation: Read info
Reading info, please wait...
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-G973U
Firmware compiled date: Wed Jan 29 14:31:39 KST 2020
PDA version: FA90_G973USQU3ATA2
CSC version: unknown
SW version: G973USQU3ATA2
Build number: 15005512
Phone SN: R38M20LK7SZ
Android version: 9 (PPR1.180610.011)
Sales code: unknown
Country: unknown
HW platform: msmnile
HW Chip: unknown
HW Modem: SM8150
Security patch level: 2019-01-01
Warranty Void: 0
Codename: beyond1qltesq
Initializing...OK
Security checking...OK
Performed by 3.0.0.1 Software version.

Flashing using G973U1 firmware:

INFO  : 08.10.2020 16:20:27 > Selected BOOT file: C:\1\g973u\G973U1UES4DТН3_ATT_SUA_Android_10\BL_G973U1UES4DТН3_CL18725736_QB33641112_REV00_user_low_ship_MULTI_CERT.tar.md5
INFO  : 08.10.2020 16:20:27 > Selected AP file: C:\1\g973u\G973U1UES4DТН3_ATT_SUA_Android_10\AP_G973U1UES4DТН3_CL18725736_QB33641112_REV00_user_low_ship_MULTI_CERT_meta_OS10.tar.md5
INFO  : 08.10.2020 16:20:27 > Selected CP file: C:\1\g973u\G973U1UES4DТН3_ATT_SUA_Android_10\CP_G973U1UES4DТН3_CP16572722_CL18725736_QB33641112_REV00_user_low_ship_MULTI_CERT.tar.md5
INFO  : 08.10.2020 16:20:27 > Selected CSC file: C:\1\g973u\G973U1UES4DТН3_ATT_SUA_Android_10\CSC_OMC_OYM_G973U1OYM4DТН3_CL18725736_QB33641112_REV00_user_low_ship_MULTI_CERT.tar.md5
WARN  : 08.10.2020 16:20:29 > Please put the phone into Download Mode and connect USB cable.
WARN  : 08.10.2020 16:20:29 > To put SM-G973U into Download Mode, You have to perform the following steps:
WARN  : 08.10.2020 16:20:29 > 1. Power off the phone.
WARN  : 08.10.2020 16:20:29 > 2. Press and hold "Volume-" + "Bixby" + "Power ON" keys.
WARN  : 08.10.2020 16:20:29 > 3. When phone turns on, press "Volume+" key.
INFO  : 08.10.2020 16:20:29 > Found phone on 
WARN  : 08.10.2020 16:20:29 > Advanced mode!
INFO  : 08.10.2020 16:20:30 > Firmware write started.
INFO  : 08.10.2020 16:20:31 > Writing ABL section...
INFO  : 08.10.2020 16:20:31 > ABL section has been written successfully.
INFO  : 08.10.2020 16:20:31 > Writing XBL section...
INFO  : 08.10.2020 16:20:31 > XBL section has been written successfully.
INFO  : 08.10.2020 16:20:31 > Writing XBL_CONFIG section...
INFO  : 08.10.2020 16:20:32 > XBL_CONFIG section has been written successfully.
INFO  : 08.10.2020 16:20:32 > Writing TZ section...
INFO  : 08.10.2020 16:20:32 > TZ section has been written successfully.
INFO  : 08.10.2020 16:20:32 > Writing HYP section...
INFO  : 08.10.2020 16:20:32 > HYP section has been written successfully.
INFO  : 08.10.2020 16:20:32 > Writing DEVCFG section...
INFO  : 08.10.2020 16:20:32 > DEVCFG section has been written successfully.
INFO  : 08.10.2020 16:20:32 > Writing AOP section...
INFO  : 08.10.2020 16:20:32 > AOP section has been written successfully.
INFO  : 08.10.2020 16:20:32 > Writing BKSECAPP section...
INFO  : 08.10.2020 16:20:33 > BKSECAPP section has been written successfully.
INFO  : 08.10.2020 16:20:33 > Writing CMNLIB section...
INFO  : 08.10.2020 16:20:33 > CMNLIB section has been written successfully.
INFO  : 08.10.2020 16:20:33 > Writing CMNLIB64 section...
INFO  : 08.10.2020 16:20:33 > CMNLIB64 section has been written successfully.
INFO  : 08.10.2020 16:20:33 > Writing KEYMASTER section...
INFO  : 08.10.2020 16:20:33 > KEYMASTER section has been written successfully.
INFO  : 08.10.2020 16:20:33 > Writing QUPFW section...
INFO  : 08.10.2020 16:20:33 > QUPFW section has been written successfully.
INFO  : 08.10.2020 16:20:33 > Writing SECDATA section...
INFO  : 08.10.2020 16:20:33 > SECDATA section has been written successfully.
INFO  : 08.10.2020 16:20:33 > Writing APDP section...
INFO  : 08.10.2020 16:20:33 > APDP section has been written successfully.
INFO  : 08.10.2020 16:20:33 > Writing MSADP section...
INFO  : 08.10.2020 16:20:33 > MSADP section has been written successfully.
INFO  : 08.10.2020 16:20:33 > Writing STORSEC section...
INFO  : 08.10.2020 16:20:33 > STORSEC section has been written successfully.
INFO  : 08.10.2020 16:20:33 > Writing UEFISECAPP section...
INFO  : 08.10.2020 16:20:34 > UEFISECAPP section has been written successfully.
INFO  : 08.10.2020 16:20:34 > Writing APNHLOS section...
INFO  : 08.10.2020 16:20:40 > APNHLOS section has been written successfully.
INFO  : 08.10.2020 16:20:40 > Writing MULTIIMGOEM section...
INFO  : 08.10.2020 16:20:40 > MULTIIMGOEM section has been written successfully.
INFO  : 08.10.2020 16:20:40 > Writing DSP section...
INFO  : 08.10.2020 16:20:44 > DSP section has been written successfully.
INFO  : 08.10.2020 16:20:44 > Writing VBMETA section...
INFO  : 08.10.2020 16:20:44 > VBMETA section has been written successfully.
INFO  : 08.10.2020 16:20:44 > Writing VK section...
INFO  : 08.10.2020 16:20:44 > VK section has been written successfully.
INFO  : 08.10.2020 16:20:44 > Writing TOOLSFV section...
INFO  : 08.10.2020 16:20:44 > TOOLSFV section has been written successfully.
INFO  : 08.10.2020 16:20:44 > Writing BOOT section...
INFO  : 08.10.2020 16:20:50 > BOOT section has been written successfully.
INFO  : 08.10.2020 16:20:50 > Writing RECOVERY section...
INFO  : 08.10.2020 16:20:57 > RECOVERY section has been written successfully.
INFO  : 08.10.2020 16:20:57 > Writing VENDOR section...
INFO  : 08.10.2020 16:21:42 > VENDOR section has been written successfully.
INFO  : 08.10.2020 16:21:42 > Writing SYSTEM section...
INFO  : 08.10.2020 16:25:35 > SYSTEM section has been written successfully.
INFO  : 08.10.2020 16:25:35 > Writing DTBO section...
INFO  : 08.10.2020 16:25:36 > DTBO section has been written successfully.
INFO  : 08.10.2020 16:25:36 > Writing PERSIST section...
INFO  : 08.10.2020 16:25:36 > PERSIST section has been written successfully.
INFO  : 08.10.2020 16:25:36 > Writing VBMETA section...
INFO  : 08.10.2020 16:25:36 > VBMETA section has been written successfully.
INFO  : 08.10.2020 16:25:36 > Writing USERDATA section...
INFO  : 08.10.2020 16:26:21 > USERDATA section has been written successfully.
INFO  : 08.10.2020 16:26:21 > Writing CARRIER section...
INFO  : 08.10.2020 16:26:21 > CARRIER section has been written successfully.
INFO  : 08.10.2020 16:26:21 > Writing DQMDBG section...
INFO  : 08.10.2020 16:26:21 > DQMDBG section has been written successfully.
INFO  : 08.10.2020 16:26:21 > Writing MODEM section...
INFO  : 08.10.2020 16:26:29 > MODEM section has been written successfully.
INFO  : 08.10.2020 16:26:29 > Writing CACHE section...
INFO  : 08.10.2020 16:26:29 > CACHE section has been written successfully.
INFO  : 08.10.2020 16:26:29 > Writing PRODUCT section...
INFO  : 08.10.2020 16:26:32 > PRODUCT section has been written successfully.
INFO  : 08.10.2020 16:26:32 > Writing OMR section...
INFO  : 08.10.2020 16:26:32 > OMR section has been written successfully.
INFO  : 08.10.2020 16:26:33 > Firmware writing successfully completed.

Final info without operator garbage:

WorkID: 0008993F
Platform: Samsung Android
Selected port: 
Selected model: SM-G973U
Operation: Read info
Reading info, please wait...
Please, press "OK" button on the phone to allow USB debugging.
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-G973U1
Firmware compiled date: Fri Aug 14 17:51:12 KST 2020
PDA version: G973U1UES4DТН3
CSC version: G973U1OYM4DТН3
SW version: G973U1UES4DТН3
Build number: 16572722
Phone SN: R38M20LK7SZ
Android version: 10 (QP1A.190711.020)
Sales code: XAA
Country: USA
HW platform: msmnile
HW Chip: unknown
HW Modem: SM8150
Security patch level: 2020-09-01
Warranty Void: 0
SIM 1 status: loaded
Codename: beyond1qlteue
Initializing...failed
Performed by 3.0.0.1 Software version.

[frankcelular1]

Welcome to Octoplus/Octopus Box LG Software version 3.0.5.03
Card S/N : 000000xxxx
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM536
Selected model: P999
Port busy
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM536
Selected model: P999
Port busy
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM536
Selected model: P999
Port busy
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM229
Selected model: P999
Mode: Normal
Phone model: P9992097
SW Version: M6600A-SCAUTNZ-2.0.9720T
IMEI: 012571-00-2967xxx
Bluetooth address: 74:A7:22:8E:04:83
Checking security...OK
Unlocking...
Switching to Download mode...OK
Sending loader...OK
Reading security area...OK
Backup saved to "P999-012571002967xxx_10-10-2020_15-36-
10.sec"
Writing security area...OK
Phone successfully unlocked!
Rebooting phone...

[worldlinkmobil]

j710fg 6.0 frp unlock

Welcome to Octoplus Box Samsung software version 3.0.0
Card S/N :
-----------------------------------------------------------------------------------
To connect SM-J710F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
To connect SM-J710GN phone you have to perform the following
steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
WorkID: 000CB618
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J710GN
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM4
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM4
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/4 attempt)..success
FRP / Reactivation lock is successfully reseted!
Performed by 3.0.0 Software version.

[Malik Shani G]

Samsung S6810 Imei Repair Done By Octoplus Samsung Box

[CYB3R GSM]

INFO  : 22/10/2020 8:46:31 pm > WorkID: 00161633
INFO  : 22/10/2020 8:46:33 pm > Platform: Samsung Android
INFO  : 22/10/2020 8:46:34 pm > Selected port: COM3
INFO  : 22/10/2020 8:46:34 pm > Selected model: SM-A750F
INFO  : 22/10/2020 8:46:35 pm > Operation: Repair Network
WARN  : 22/10/2020 8:46:35 pm > Please, press "OK" button on the phone to allow USB debugging.
INFO  : 22/10/2020 8:46:39 pm > Detected phone model: SM-A750F
INFO  : 22/10/2020 8:46:40 pm > Firmware compiled date: Mon Jan  6 19:39:55 KST 2020
INFO  : 22/10/2020 8:46:40 pm > PDA version: A750FXXS4BTA1
INFO  : 22/10/2020 8:46:41 pm > CSC version: A750FOJM4BTA1
INFO  : 22/10/2020 8:46:41 pm > SW version: A750FNXXU4ATA1
INFO  : 22/10/2020 8:46:41 pm > Build number: QB14859254
INFO  : 22/10/2020 8:46:42 pm > Phone SN: RxxxxxxP
INFO  : 22/10/2020 8:46:42 pm > Android version: 9 (PPR1.180610.011)
INFO  : 22/10/2020 8:46:42 pm > Sales code: PAK
INFO  : 22/10/2020 8:46:43 pm > Country: PAKISTAN
INFO  : 22/10/2020 8:46:44 pm > HW platform: exynos5
INFO  : 22/10/2020 8:46:44 pm > HW Chip: unknown
INFO  : 22/10/2020 8:46:45 pm > HW Modem: SHANNON327
INFO  : 22/10/2020 8:46:45 pm > Security patch level: 2020-01-01
INFO  : 22/10/2020 8:46:45 pm > Warranty Void: 1
INFO  : 22/10/2020 8:46:46 pm > SIM 1 status: absent
INFO  : 22/10/2020 8:46:46 pm > SIM 2 status: absent
INFO  : 22/10/2020 8:46:47 pm > Codename: a7y18ltejt
INFO  : 22/10/2020 8:46:47 pm > Checking Root:
INFO  : 22/10/2020 8:46:47 pm > Phone is Rooted.
INFO  : 22/10/2020 8:46:48 pm > -----------------------------------------------------------------------------------
WARN  : 22/10/2020 8:46:48 pm > Connecting to server ..
INFO  : 22/10/2020 8:46:49 pm > Username: 6XXXXXXXy
INFO  : 22/10/2020 8:46:59 pm > Connect to server successfull.
INFO  : 22/10/2020 8:46:59 pm > Checking smart card...
INFO  : 22/10/2020 8:47:10 pm > Your balance: 100 credits.
INFO  : 22/10/2020 8:47:17 pm > Checking operation...
INFO  : 22/10/2020 8:47:21 pm > OK
INFO  : 22/10/2020 8:47:21 pm > -----------------------------------------------------------------------------------
INFO  : 22/10/2020 8:47:22 pm > Repairing network. Please wait, this can take some time...
INFO  : 22/10/2020 8:47:56 pm > OK
WARN  : 22/10/2020 8:47:56 pm > Network is successfully repaired.
INFO  : 22/10/2020 8:47:59 pm > Performed by 3.0.0 Software version.
INFO  : 22/10/2020 8:57:31 pm > -----------------------------------------------------------------------------------

[ak0101]

N960U Bit5 Tmob Unlocked after writing combination file.



Log file "C:\Program Files (x86)\Octoplus\Octoplus_Samsung\LOG\24-10-2020_17-57-26.log" created (10/24/2020 5:57:26 PM).
INFO : 10/24/2020 5:57:36 PM > Set up system language English (file: English.ini)
INFO : 10/24/2020 5:57:36 PM > Welcome to Octoplus Box Samsung software version 3.0.0.3
INFO : 10/24/2020 5:57:36 PM > Card S/N : 0000xxxxx
INFO : 10/24/2020 5:57:42 PM > -----------------------------------------------------------------------------------
INFO : 10/24/2020 5:57:42 PM > Platform: Samsung Anycall
INFO : 10/24/2020 5:57:42 PM > Selected port: COM25
INFO : 10/24/2020 5:57:43 PM > Selected model: SM-N960U
INFO : 10/24/2020 5:58:13 PM > Mode: Emergency
ERROR : 10/24/2020 5:58:14 PM > Unlock for SM-N960U phone in emergency mode can’t be done
INFO : 10/24/2020 5:58:14 PM > Performed by 3.0.0.3 Software version.
INFO : 10/24/2020 5:59:45 PM > -----------------------------------------------------------------------------------
INFO : 10/24/2020 5:59:47 PM > WorkID: 0018368E
INFO : 10/24/2020 5:59:49 PM > Platform: Samsung Android
INFO : 10/24/2020 5:59:49 PM > Selected port: COM25
INFO : 10/24/2020 5:59:49 PM > Selected model: SM-N960U
INFO : 10/24/2020 5:59:49 PM > Operation: Unlock
WARN : 10/24/2020 5:59:52 PM > Please, press "OK" button on the phone to allow USB debugging.
INFO : 10/24/2020 5:59:54 PM > Detected phone model: SM-N960U
INFO : 10/24/2020 5:59:54 PM > Firmware compiled date: Tue Aug 4 09:20:50 KST 2020
INFO : 10/24/2020 5:59:54 PM > PDA version: FA81_N960USQU5ATH1
INFO : 10/24/2020 5:59:54 PM > CSC version: unknown
INFO : 10/24/2020 5:59:54 PM > SW version: N960USQU5ATH1
INFO : 10/24/2020 5:59:54 PM > Build number: 16489019
INFO : 10/24/2020 5:59:54 PM > Phone SN: RF8KA3XLM8X
INFO : 10/24/2020 5:59:55 PM > Android version: 8.1.0 (M1AJQ)
INFO : 10/24/2020 5:59:55 PM > Sales code: unknown
INFO : 10/24/2020 5:59:55 PM > Country: unknown
INFO : 10/24/2020 5:59:55 PM > HW platform: sdm845
INFO : 10/24/2020 5:59:55 PM > HW Chip: SDM845
INFO : 10/24/2020 5:59:55 PM > HW Modem: SDM845
INFO : 10/24/2020 5:59:55 PM > Security patch level: 2018-06-01
INFO : 10/24/2020 5:59:55 PM > Warranty Void: 0
INFO : 10/24/2020 5:59:56 PM > SIM 1 status: absent
INFO : 10/24/2020 5:59:56 PM > Codename: crownqltesq
WARN : 10/24/2020 5:59:56 PM > Phone will restart now. Please don't disconnect cable!
INFO : 10/24/2020 5:59:56 PM > Rebooting phone...
WARN : 10/24/2020 6:00:15 PM > OK
INFO : 10/24/2020 6:00:15 PM > Searching for ADB device...
WARN : 10/24/2020 6:00:28 PM > OK
INFO : 10/24/2020 6:00:28 PM > Searching for USB diagnostic port...
WARN : 10/24/2020 6:00:28 PM > OK
INFO : 10/24/2020 6:00:28 PM > Connecting to server...
WARN : 10/24/2020 6:00:30 PM > OK
INFO : 10/24/2020 6:00:31 PM > Checking smart card...
WARN : 10/24/2020 6:00:39 PM > OK
INFO : 10/24/2020 6:00:40 PM > Username: xxxxxxxxx
INFO : 10/24/2020 6:00:40 PM > Authorizing...
WARN : 10/24/2020 6:00:42 PM > OK
INFO : 10/24/2020 6:00:42 PM > Checking balance...
WARN : 10/24/2020 6:00:45 PM > OK
INFO : 10/24/2020 6:00:45 PM > Your balance: 325 credits.
INFO : 10/24/2020 6:00:45 PM > Checking operation...
WARN : 10/24/2020 6:00:47 PM > OK
INFO : 10/24/2020 6:00:47 PM > Initializing exploit...
WARN : 10/24/2020 6:01:09 PM > OK
INFO : 10/24/2020 6:01:09 PM > Preparing phone..
WARN : 10/24/2020 6:02:17 PM > OK
INFO : 10/24/2020 6:02:19 PM > Searching for USB diagnostic port...
WARN : 10/24/2020 6:02:21 PM > OK
INFO : 10/24/2020 6:02:23 PM > Rebooting phone in Upload Mode...
WARN : 10/24/2020 6:03:51 PM > OK
INFO : 10/24/2020 6:03:54 PM > Searching for device in Uplode Mode...
WARN : 10/24/2020 6:04:10 PM > OK
INFO : 10/24/2020 6:04:10 PM > Reading Uplode Mode data...
WARN : 10/24/2020 6:04:40 PM > OK
WARN : 10/24/2020 6:04:42 PM > Phone will restart now. Please don't disconnect cable!
INFO : 10/24/2020 6:04:44 PM > Rebooting phone...
WARN : 10/24/2020 6:05:03 PM > OK
INFO : 10/24/2020 6:05:05 PM > Searching for ADB device...
WARN : 10/24/2020 6:06:12 PM > OK
INFO : 10/24/2020 6:06:14 PM > Initializing exploit...
WARN : 10/24/2020 6:06:45 PM > OK
INFO : 10/24/2020 6:06:48 PM > Bypassing security 1...
WARN : 10/24/2020 6:06:56 PM > OK
INFO : 10/24/2020 6:06:59 PM > Bypassing security...
WARN : 10/24/2020 6:07:17 PM > OK
INFO : 10/24/2020 6:07:20 PM > Unlocking phone...
WARN : 10/24/2020 6:07:39 PM > OK
INFO : 10/24/2020 6:07:42 PM > Rebooting phone...
WARN : 10/24/2020 6:07:51 PM > OK
INFO : 10/24/2020 6:07:53 PM > Phone is successfully unlocked
INFO : 10/24/2020 6:07:56 PM > Performed by 3.0.0.3 Software version.
INFO : 10/24/2020 6:08:13 PM > -----------------------------------------------------------------------------------
INFO : 10/24/2020 6:08:13 PM > Connecting to server...
INFO : 10/24/2020 6:08:16 PM > Username: xxxxxxxxx
INFO : 10/24/2020 6:08:16 PM > Authorizing...
INFO : 10/24/2020 6:08:19 PM > Checking balance...
WARN : 10/24/2020 6:08:21 PM > Your balance: 265 credits.
INFO : 10/24/2020 6:08:21 PM > Performed by 3.0.0.3 Software version.
Log file "C:\Program Files (x86)\Octoplus\Octoplus_Samsung\LOG\24-10-2020_17-57-26.log" closed (10/24/2020 6:08:28 PM).

[serik_cook]

Samsung s5 (G900) remove screen lock
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM79
Selected model: SM-G900F
Connecting to server...
Connecting to server...Ok!
Checking resource files...
Resource files already downloaded.
Please put the phone into Download Mode and connect USB cable.
To put SM-G900F into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Waiting for phone...
Firmware write started.
Writing Recovery section...
Recovery section has been written successfully.
Please, put the phone into Recovery Mode and connect USB cable.
To put SM-G900F into Recovery Mode, please, perform the following
steps:
1. Reconnect the battery.
2. Press and hold "Volume+" + "Home" + "Power ON" keys.
3. Release the "Power ON" key when the Samsung logo appears.
Searching for a phone. Please wait...
Preparing phone..
Resetting Screen Lock...
Reset Screen Lock successfully completed.
To unlock screen please input any password or pattern!
Performed by 3.0.0.6 Software version.

[hunnyck]

SM-J327P Unlock successfully done

-----------------------------------------------------------------------------------
WorkID: 0017A17F
Platform: Samsung Android
Selected port: COM11
Selected model: SM-J327P
Operation: Read info
Reading info, please wait...
Proper android device not found. Make sure that "USB debug" option on
the device is turned on.
Performed by 3.0.0.1 Software version.
-----------------------------------------------------------------------------------
WorkID: 0017A228
Platform: Samsung Android
Selected port: COM63
Selected model: SM-J327P
Operation: Read info
Reading info, please wait...
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-J327P
Firmware compiled date: Mon Dec 18 16:36:53 KST 2017
PDA version: J327PVPU3AQL3
CSC version: J327PSPT3AQL3
SW version: J327PVPU3AQL3
Build number:
Phone SN: 00000000000
Android version: 6.0.1 (MMB29M)
Sales code: BST
Country: USA
HW platform: msm8937
HW Chip: MSM8937
HW Modem: MSM8917
Security patch level: 2017-12-01
Warranty Void: 0
SIM 1 status: absent
Codename: j3popltespr
Performed by 3.0.0.1 Software version.
-----------------------------------------------------------------------------------
WorkID: 0017A2BB
Platform: Samsung Android
Selected port: COM63
Selected model: SM-J327P
Operation: Unlock
Detected phone model: SM-J327P
Firmware compiled date: Mon Dec 18 16:36:53 KST 2017
PDA version: J327PVPU3AQL3
CSC version: J327PSPT3AQL3
SW version: J327PVPU3AQL3
Build number:
Phone SN: 00000000000
Android version: 6.0.1 (MMB29M)
Sales code: BST
Country: USA
HW platform: msm8937
HW Chip: MSM8937
HW Modem: MSM8917
Security patch level: 2017-12-01
Warranty Void: 0
SIM 1 status: absent
Codename: j3popltespr
Initializing...OK
Reading info...
Mode: Normal
Firmware compiled date: Sep 01 2017
Firmware compiled time: J327P.03
Firmware released date: Dec 18 2017
Firmware released time: 09:53:53
SW Version: 09:53:53Sep 01 2017J327P.038937.gen:ÿd
Sending SPC...OK
Unlocking phone...OK
Restoring QCN...
Writing NV items...
NV items write successfully
Phone is successfully unlocked
Performed by 3.0.0.1 Software version.

[Dr_Wolodya]

Samsung SM-G935F (G935FXXS2DRAB) Reset FRP by UART successfully done:

Work ID: 0000000000175C05
Platform: Samsung Android
Selected port: COM4
Selected model: SM-G935F
Operation: Reset FRP - UART UFS
Please put the phone into Download Mode and connect USB cable.
Waiting for phone...
Reading PIT...
PIT was read successfully.
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Checking operation...OK
Resetting FRP lock..
FRP / Reactivation lock is successfully reseted!
Performed by 3.0.0.6 Software version.

[Dr_Wolodya]

Samsung SM-A307FN (A307FNXXU2BTI4, Android 10) Device's modem is not supported for read codes:

Work ID: 00000000001A483A
Platform: Samsung Android
Selected port: COM5
Selected model: SM-A307FN
Operation: Read Codes - Via DIAG and ADB (June 2020 Method)
Detected phone model: SM-A307FN
Firmware compiled date: Tue Sep 29 14:44:07 KST 2020
PDA version: A307FNXXU2BTI4
CSC version: A307FNOEM2BTI4
SW version: A307FNXXU2BTI4
Build number: QB16982172
Phone SN: RF8N82FAAQK
Android version: 10 (QP1A.190711.020)
Sales code: ITV
Country: ITALY
HW platform: universal7904
HW Chip: unknown
HW Modem: SHANNON327
Security patch level: 2020-10-01
Warranty Void: 0
SIM 1 status: absent
SIM 2 status: absent
Codename: a30seea
Searching for USB diagnostic port...OK
Connecting...OK
Connecting to server...OK
Checking smart card...OK
Username: Dr_Volodya
Authorizing...OK
Checking balance...OK
Your balance: 121 credits.
Checking operation...OK
Checking operation...OK
Device's modem A307FNXXU2BTI4 (QB16982172) is not supported!
Read codes failed
Performed by 3.0.0.7 Software version.

Downgrade with firmware from support "A307FNXXU2ATB1_Bulgaria_Android_9.zip".

SM-A307FN (9.0) "Read Codes" successfully done w/out root and w/out tripping KNOX:

Work ID: 00000000001A6416
Platform: Samsung Android
Selected port: COM5
Selected model: SM-A307FN
Operation: Read Codes - Via ADB
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-A307FN
Firmware compiled date: Tue Feb  4 11:39:42 KST 2020
PDA version: A307FNXXU2ATB1
CSC version: A307FNOEM2ASL3
SW version: A307FNXXU2ATB1
Build number: QB15046140
Phone SN: RF8N82FAAQK
Android version: 9 (PPR1.180610.011)
Sales code: ITV
Country: ITALY
HW platform: exynos5
HW Chip: unknown
HW Modem: SHANNON327
Security patch level: 2020-01-01
Warranty Void: 0
SIM 1 status: absent
SIM 2 status: absent
Codename: a30seea
-----------------------------------------------------------------------------------
Connecting to server ..
Username: Dr_Volodya
Connect to server successfull.
Checking smart card...
Checking operation...OK
Your balance: 121 credits.
-----------------------------------------------------------------------------------
Checking Root:
Phone is not Rooted.
Rebooting phone
Searching for a phone. Please wait...OK
Reading codes...OK
FREEZE: 19808291
NET LOCK: 61151716
SUB LOCK: 00000000
SP LOCK: 00000000
CP LOCK: 00000000
SIM LOCK: 00000000
Performed by 3.0.0.7 Software version.

[Dr_Wolodya]

SM-A715F (Android 10, A715FXXU3ATI8) "Read Codes" successfully done w/out root and w/out tripping KNOX:

Work ID: 00000000001C886E
Platform: Samsung Android
Selected port: COM5
Selected model: SM-A715F
Operation: Read Codes - General
"Devices with Unlock App (branded to T-Mobile, MetroPCS, etc.) are not supported!

Make sure device requests to enter unlock code and only then perform “Read Codes” operation!"

NOTE:
Please, don't run any other third party Softwares or start any other operations which can use your CPU/RAM resources during the operation!

Continue?
Searching for a phone. Please wait...
Detected phone model: SM-A715F
Firmware compiled date: Tue Sep 29 20:38:39 KST 2020
PDA version: A715FXXU3ATI8
CSC version: A715FOXM3ATI8
SW version: A715FXXU3ATI5
Build number: 16918304
Android version: 10 (QP1A.190711.020)
Sales code: BTU
Country: UK & IRE
HW platform: sm6150
HW Chip: unknown
HW Modem: SM7150
Security patch level: 2020-10-01
Warranty Void: 0
SIM 1 status: absent
SIM 2 status: absent
Codename: a71naeea
-----------------------------------------------------------------------------------
Connecting to server ..
Username: Dr_Volodya
Connect to server successfull.
Checking smart card...
Your balance: 471 credits.
-----------------------------------------------------------------------------------
Detecting high security level.
Rebooting phone in Upload Mode...
Insert sim card. "SIM network unlock PIN" screen must be active on your device. Enter 33445566 unlock code, and preess "Unlock" button on your device.
Searching for a phone. Please wait...OK
Reading data...OK
Detecting security type...(1)
Searching for signatures...OK
Searching for signatures...OK
Sending request...OK
Calculating codes. Please wait...
FREEZE: 46194685
NET LOCK: 50742695
SUB LOCK: 00000000
SP LOCK: 00000000
CP LOCK: 00000000
Performed by 3.0.0.7 Software version.

[Denis20]

INFO : 11/13/2020 9:10:09 PM > Work ID: 00000000001D1F08
INFO : 11/13/2020 9:10:11 PM > Platform: Samsung Android
INFO : 11/13/2020 9:10:11 PM > Selected port: COM4
INFO : 11/13/2020 9:10:11 PM > Selected model: SM-N975U
INFO : 11/13/2020 9:10:11 PM > Operation: Read info
INFO : 11/13/2020 9:10:11 PM > Reading info, please wait...
INFO : 11/13/2020 9:10:13 PM > Detected phone model: SM-N975U
INFO : 11/13/2020 9:10:13 PM > Firmware compiled date: Wed May 20 11:09:38 KST 2020
INFO : 11/13/2020 9:10:13 PM > PDA version: N975USQU3CTE7
INFO : 11/13/2020 9:10:13 PM > CSC version: N975UOYN3CTE7
INFO : 11/13/2020 9:10:13 PM > SW version: N975USQU3CTE7
INFO : 11/13/2020 9:10:13 PM > Build number: 15900473
INFO : 11/13/2020 9:10:13 PM > Phone SN: RF8MB014LRH
INFO : 11/13/2020 9:10:13 PM > Android version: 10 (QP1A.190711.020)
INFO : 11/13/2020 9:10:13 PM > Sales code: SPR
INFO : 11/13/2020 9:10:13 PM > Country: USA
INFO : 11/13/2020 9:10:13 PM > HW platform: msmnile
INFO : 11/13/2020 9:10:13 PM > HW Chip: unknown
INFO : 11/13/2020 9:10:13 PM > HW Modem: SM8150
INFO : 11/13/2020 9:10:13 PM > Security patch level: 2020-06-01
INFO : 11/13/2020 9:10:13 PM > Warranty Void: 0
INFO : 11/13/2020 9:10:13 PM > SIM 1 status: absent
INFO : 11/13/2020 9:10:14 PM > Codename: d2qsq
INFO : 11/13/2020 9:10:16 PM > Performed by 3.0.0.7 Software version.
INFO : 11/13/2020 9:10:23 PM > -----------------------------------------------------------------------------------
INFO : 11/13/2020 9:10:27 PM > Work ID: 00000000001D1F11
INFO : 11/13/2020 9:10:28 PM > Platform: Samsung Android
INFO : 11/13/2020 9:10:28 PM > Selected port: COM4
INFO : 11/13/2020 9:10:28 PM > Selected model: SM-N975U
INFO : 11/13/2020 9:10:28 PM > Operation: Unlock
INFO : 11/13/2020 9:10:31 PM > Detected phone model: SM-N975U
INFO : 11/13/2020 9:10:31 PM > Firmware compiled date: Wed May 20 11:09:38 KST 2020
INFO : 11/13/2020 9:10:31 PM > PDA version: N975USQU3CTE7
INFO : 11/13/2020 9:10:31 PM > CSC version: N975UOYN3CTE7
INFO : 11/13/2020 9:10:31 PM > SW version: N975USQU3CTE7
INFO : 11/13/2020 9:10:31 PM > Build number: 15900473
INFO : 11/13/2020 9:10:32 PM > Phone SN: RF8MB014LRH
INFO : 11/13/2020 9:10:32 PM > Android version: 10 (QP1A.190711.020)
INFO : 11/13/2020 9:10:32 PM > Sales code: SPR
INFO : 11/13/2020 9:10:32 PM > Country: USA
INFO : 11/13/2020 9:10:32 PM > HW platform: msmnile
INFO : 11/13/2020 9:10:32 PM > HW Chip: unknown
INFO : 11/13/2020 9:10:32 PM > HW Modem: SM8150
INFO : 11/13/2020 9:10:32 PM > Security patch level: 2020-06-01
INFO : 11/13/2020 9:10:32 PM > Warranty Void: 0
INFO : 11/13/2020 9:10:32 PM > SIM 1 status: absent
INFO : 11/13/2020 9:10:32 PM > Codename: d2qsq
INFO : 11/13/2020 9:10:32 PM > Searching for USB diagnostic port...
WARN : 11/13/2020 9:10:32 PM > OK
INFO : 11/13/2020 9:10:35 PM > Attention: The Unlock process may take up to 10 minutes, in some cases period of waiting may be extended up to 48 hours!
WARN : 11/13/2020 9:10:35 PM > Phone will restart now. Please don't disconnect cable!
INFO : 11/13/2020 9:10:35 PM > Rebooting phone...
WARN : 11/13/2020 9:10:41 PM > OK
INFO : 11/13/2020 9:10:41 PM > Searching for ADB device...
WARN : 11/13/2020 9:11:12 PM > OK
INFO : 11/13/2020 9:11:17 PM > Connecting to server...
WARN : 11/13/2020 9:11:20 PM > OK
INFO : 11/13/2020 9:11:20 PM > Checking smart card...
WARN : 11/13/2020 9:11:29 PM > OK
INFO : 11/13/2020 9:11:29 PM > Username: XXXXX
INFO : 11/13/2020 9:11:29 PM > Authorizing...
WARN : 11/13/2020 9:11:35 PM > OK
INFO : 11/13/2020 9:11:35 PM > Checking balance...
WARN : 11/13/2020 9:11:45 PM > OK
INFO : 11/13/2020 9:11:45 PM > Your balance: 400 credits.
INFO : 11/13/2020 9:11:45 PM > Checking operation...
WARN : 11/13/2020 9:11:48 PM > OK
INFO : 11/13/2020 9:11:50 PM > Initializing exploit...
WARN : 11/13/2020 9:12:16 PM > OK
INFO : 11/13/2020 9:12:16 PM > Preparing phone..
WARN : 11/13/2020 9:13:43 PM > OK
INFO : 11/13/2020 9:13:45 PM > Checking security...
WARN : 11/13/2020 9:13:59 PM > OK
INFO : 11/13/2020 9:14:05 PM > Calculating. Please Wait...
WARN : 11/13/2020 9:14:31 PM > OK
INFO : 11/13/2020 9:14:33 PM > Restoring EFS...
WARN : 11/13/2020 9:15:30 PM > OK
INFO : 11/13/2020 9:15:33 PM > Bypassing security 1...
WARN : 11/13/2020 9:16:41 PM > OK
INFO : 11/13/2020 9:16:45 PM > Bypassing security 2...
WARN : 11/13/2020 9:17:33 PM > OK
INFO : 11/13/2020 9:17:36 PM > Reseting MSL...
WARN : 11/13/2020 9:19:32 PM > OK
INFO : 11/13/2020 9:19:35 PM > Bypassing security 3...
WARN : 11/13/2020 9:20:33 PM > OK
INFO : 11/13/2020 9:20:36 PM > Reseting MSL...
WARN : 11/13/2020 9:22:32 PM > OK
INFO : 11/13/2020 9:22:34 PM > Unlocking phone...
WARN : 11/13/2020 9:23:09 PM > OK
INFO : 11/13/2020 9:23:15 PM > Rebooting phone...
WARN : 11/13/2020 9:23:29 PM > OK
INFO : 11/13/2020 9:23:32 PM > Phone is successfully unlocked
INFO : 11/13/2020 9:23:33 PM > Performed by 3.0.0.7 Software version.

[mtb116]

A217F u2 unlock done

WorkID: 001EF2CF
Platform: Samsung Android
Selected port: COM3
Selected model: SM-A217F
Operation: Read Codes - Via DIAG and ADB (June 2020 Method)
Please, press "OK" button on the phone to allow USB debugging.
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-A217F
Firmware compiled date: Thu Jul 16 14:28:54 KST 2020
PDA version: A217FXXU2ATG5
CSC version: A217FOLM2ATG6
SW version: A217FXXU2ATG5
Build number: QB16353903
Phone SN: R58N80S5E3Z
Android version: 10 (QP1A.190711.020)
Sales code: OPP
Country: Australia
HW platform: universal3830
HW Chip: unknown
HW Modem: SHANNON318
Security patch level: 2020-07-01
Warranty Void: 0
SIM 1 status: absent
Codename: a21snnxx
Searching for USB diagnostic port...OK
Connecting...OK
Connecting to server...OK
Checking smart card...OK
Username: m***********
Authorizing...OK
Checking balance...OK
Your balance: 171 credits.
Checking operation...OK
Checking operation...OK
Initializing exploit...OK
Reading additional info...
Connecting to modem port...
Found modem port on COM38
Sending device information...OK
Searching for USB diagnostic port...OK
Connecting...OK
Creating patch...OK
Writing patch...OK
Reading codes...
Step 1...
Step 2...OK
Rebooting phone...OK
FREEZE: 15818015
NET LOCK: 61161561
SUB LOCK: 00000000
SP LOCK: 00000000
CP LOCK: 00000000
SIM LOCK: 00000000
Performed by 3.0.0 Software version.

[Dr_Wolodya]

SM-A715F (Android 10, A715FXXU3ATH8) "Read Codes" successfully done w/out root and w/out tripping KNOX:

Work ID: 000000000021DAE4
Platform: Samsung Android
Selected port: COM40
Selected model: SM-A715F
Operation: Read Codes - General
"Devices with Unlock App (branded to T-Mobile, MetroPCS, etc.) are not supported!

Make sure device requests to enter unlock code and only then perform “Read Codes” operation!"

NOTE:
Please, don't run any other third party Softwares or start any other operations which can use your CPU/RAM resources during the operation!

Continue?
Searching for a phone. Please wait...
Detected phone model: SM-A715F
Firmware compiled date: Fri Aug 28 20:21:57 KST 2020
PDA version: A715FXXU3ATH8
CSC version: A715FOXM3ATH8
SW version: A715FXXU3ATGL
Build number: 16455491
Phone SN: R58N82K2AGL
Android version: 10 (QP1A.190711.020)
Sales code: ITV
Country: ITALY
HW platform: sm6150
HW Chip: unknown
HW Modem: SM7150
Security patch level: 2020-08-01
Warranty Void: 0
SIM 1 status: absent
SIM 2 status: regional locked
Codename: a71naeea
-----------------------------------------------------------------------------------
Connecting to server ..
Username: Dr_Volodya
Connect to server successfull.
Checking smart card...
Your balance: 361 credits.
-----------------------------------------------------------------------------------
Detecting high security level.
Rebooting phone in Upload Mode...
Insert sim card. "SIM network unlock PIN" screen must be active on your device. Enter 33445566 unlock code, and preess "Unlock" button on your device.
Searching for a phone. Please wait...OK
Reading data...OK
Detecting security type...(1)
Searching for signatures...OK
Searching for signatures...OK
Sending request...OK
Calculating codes. Please wait...
FREEZE: 51508407
NET LOCK: 69505194
SUB LOCK: 00000000
SP LOCK: 00000000
CP LOCK: 00000000
Performed by 3.0.0.7 Software version.