|
samsung i9515 wipe sequrity problame Welcome to Octoplus/Octopus Box Samsung software version 1.8.1 ----------------------------------------------------------------------------------- To connect GT-I9515 phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3.Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. 6. Go to dial window. 7. Enter "*#0808#" number. 8. Select "DM+Modem+ADB". 9. Press Home button. 10. Go to dial window. 11. Enter "*#9090#" number. 12. Set "Diag config" to "USB" value. 13. Restart phone. 14. Press "Read Info" in software. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM1 Selected model: GT-I9515 Phone was not found on the selected port! Searching for USB diagnostic port... Connecting to phone on COM201 Mode: Normal Phone model: GT-I9515 Firmware compiled date: Dec 24 2013 Firmware compiled time: 00:00:00 Firmware released date: Mar 5 2014 Firmware released time: 22:03:35 Phone IMEI: 352168-06-849474-8 SW version: M9615A-CEFWTAZM-4.0.17135 ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM201 Selected model: GT-I9515 Please, press "OK" button on the phone to allow USB debugging.. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM201 Selected model: GT-I9515 Reading info, please wait... Please, press "OK" button on the phone to allow USB debugging.. Detected phone model: GT-I9515 Firmware compiled date: Wed Mar 5 21:20:18 KST 2014 PDA version: I9515XXU1ANC2 CSC version: I9515OJV1AND1 SW version: I9515XXU1ANC2 Phone IMEI: 352168068494748 Phone SN: RF8F815FS4K Android version: 4.4.2 (KOT49H) ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM201 Selected model: GT-I9515 Detected phone model: GT-I9515 Firmware compiled date: Wed Mar 5 21:20:18 KST 2014 PDA version: I9515XXU1ANC2 CSC version: I9515OJV1AND1 SW version: I9515XXU1ANC2 Phone IMEI: 352168068494748 Phone SN: RF8F815FS4K Android version: 4.4.2 (KOT49H) Reading info... Phone was not found on the selected port! ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM202 Selected model: GT-I9515 Reading info, please wait... Detected phone model: GT-I9515 Firmware compiled date: Wed Mar 5 21:20:18 KST 2014 PDA version: I9515XXU1ANC2 CSC version: I9515OJV1AND1 SW version: I9515XXU1ANC2 Phone IMEI: 352168068494748 Phone SN: RF8F815FS4K Android version: 4.4.2 (KOT49H) ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM202 Selected model: GT-I9515 Detected phone model: GT-I9515 Firmware compiled date: Wed Mar 5 21:20:18 KST 2014 PDA version: I9515XXU1ANC2 CSC version: I9515OJV1AND1 SW version: I9515XXU1ANC2 Phone IMEI: 352168068494748 Phone SN: RF8F815FS4K Android version: 4.4.2 (KOT49H) Reading info... Phone was not found on the selected port! ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM202 Selected model: GT-I9515 Detected phone model: GT-I9515 Firmware compiled date: Wed Mar 5 21:20:18 KST 2014 PDA version: I9515XXU1ANC2 CSC version: I9515OJV1AND1 SW version: I9515XXU1ANC2 Phone IMEI: 352168068494748 Phone SN: RF8F815FS4K Android version: 4.4.2 (KOT49H) Reading info... Phone was not found on the selected port! ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM203 Selected model: GT-I9515 Reading info, please wait... Detected phone model: GT-I9515 Firmware compiled date: Wed Mar 5 21:20:18 KST 2014 PDA version: I9515XXU1ANC2 CSC version: I9515OJV1AND1 SW version: I9515XXU1ANC2 Phone IMEI: 352168068494748 Phone SN: RF8F815FS4K Android version: 4.4.2 (KOT49H) ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM203 Selected model: GT-I9515 Detected phone model: GT-I9515 Firmware compiled date: Wed Mar 5 21:20:18 KST 2014 PDA version: I9515XXU1ANC2 CSC version: I9515OJV1AND1 SW version: I9515XXU1ANC2 Phone IMEI: 352168068494748 Phone SN: RF8F815FS4K Android version: 4.4.2 (KOT49H) Reading info... Phone was not found on the selected port! ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM201 Selected model: GT-I9515 Reading info, please wait... Detected phone model: GT-I9515 Firmware compiled date: Wed Mar 5 21:20:18 KST 2014 PDA version: I9515XXU1ANC2 CSC version: I9515OJV1AND1 SW version: I9515XXU1ANC2 Phone IMEI: 352168068494748 Phone SN: RF8F815FS4K Android version: 4.4.2 (KOT49H) ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM201 Selected model: GT-I9515 Detected phone model: GT-I9515 Firmware compiled date: Wed Mar 5 21:20:18 KST 2014 PDA version: I9515XXU1ANC2 CSC version: I9515OJV1AND1 SW version: I9515XXU1ANC2 Phone IMEI: 352168068494748 Phone SN: RF8F815FS4K Android version: 4.4.2 (KOT49H) Reading info... Phone was not found on the selected port! |
You need to connect the phone correctly. To connect GT-I9515, perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3.Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. 6. Go to dial window. 7. Enter "*#0808#" number. 8. Select "DM+Modem+ADB". 9. Press Home button. 10. Go to dial window. 11. Enter "*#9090#" number. 12. Set "Diag config" to "USB" value. 13. Restart phone. 14. Press "Read Info" in software. |
Welcome to Octoplus/Octopus Box Samsung software version 1.8.1 ----------------------------------------------------------------------------------- To connect GT-I9515 phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3.Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. 6. Go to dial window. 7. Enter "*#0808#" number. 8. Select "DM+Modem+ADB". 9. Press Home button. 10. Go to dial window. 11. Enter "*#9090#" number. 12. Set "Diag config" to "USB" value. 13. Restart phone. 14. Press "Read Info" in software. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM1 Selected model: GT-I9515 Phone was not found on the selected port! Searching for USB diagnostic port... Connecting to phone on COM201 Mode: Emergency ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM201 Selected model: GT-I9515 Phone was not found on the selected port! Searching for USB diagnostic port... Connecting to phone on COM201 Mode: Emergency ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM202 Selected model: GT-I9515 Mode: Normal Phone model: GT-I9515 Firmware compiled date: Firmware compiled time: Firmware released date: -ù~ Firmware released time: SW version: ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM202 Selected model: GT-I9515 Mode: Normal Phone model: GT-I9515 Firmware compiled date: Firmware compiled time: Firmware released date: -ù~ Firmware released time: SW version: ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM202 Selected model: GT-I9515 Port is busy Phone was not found on the selected port! Searching for USB diagnostic port... Connecting to phone on COM204 Mode: Emergency ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM204 Selected model: GT-I9515 Please, press "OK" button on the phone to allow USB debugging.. Detected phone model: GT-I9515 Firmware compiled date: Tue Apr 15 10:01:27 KST 2014 PDA version: I9515XXU1AND3 CSC version: I9515DBT1AND1 SW version: I9515XXU1AND3 Phone IMEI: 352168068494748 Phone SN: RF8F815FS4K Android version: 4.4.2 (KOT49H) Reading info... Phone was not found on the selected port! ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM204 Selected model: GT-I9515 Detected phone model: GT-I9515 Firmware compiled date: Tue Apr 15 10:01:27 KST 2014 PDA version: I9515XXU1AND3 CSC version: I9515DBT1AND1 SW version: I9515XXU1AND3 Phone IMEI: 352168068494748 Phone SN: RF8F815FS4K Android version: 4.4.2 (KOT49H) Reading info... Phone was not found on the selected port! ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM201 Selected model: GT-I9515 Detected phone model: GT-I9515 Firmware compiled date: Tue Apr 15 10:01:27 KST 2014 PDA version: I9515XXU1AND3 CSC version: I9515DBT1AND1 SW version: I9515XXU1AND3 Phone IMEI: 352168068494748 Phone SN: RF8F815FS4K Android version: 4.4.2 (KOT49H) Reading info... Phone was not found on the selected port! ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM202 Selected model: GT-I9515 Detected phone model: GT-I9515 Firmware compiled date: Tue Apr 15 10:01:27 KST 2014 PDA version: I9515XXU1AND3 CSC version: I9515DBT1AND1 SW version: I9515XXU1AND3 Phone IMEI: 352168068494748 Phone SN: RF8F815FS4K Android version: 4.4.2 (KOT49H) Reading info... Phone was not found on the selected port! ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM201 Selected model: GT-I9515 Detected phone model: GT-I9515 Firmware compiled date: Tue Apr 15 10:01:27 KST 2014 PDA version: I9515XXU1AND3 CSC version: I9515DBT1AND1 SW version: I9515XXU1AND3 Phone IMEI: 352168068494748 Phone SN: RF8F815FS4K Android version: 4.4.2 (KOT49H) Reading info... Phone was not found on the selected port! ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM201 Selected model: GT-I9515 Detected phone model: GT-I9515 Firmware compiled date: Tue Apr 15 10:01:27 KST 2014 PDA version: I9515XXU1AND3 CSC version: I9515DBT1AND1 SW version: I9515XXU1AND3 Phone IMEI: 352168068494748 Phone SN: RF8F815FS4K Android version: 4.4.2 (KOT49H) Reading info... Phone was not found on the selected port! ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM201 Selected model: GT-I9515 Detected phone model: GT-I9515 Firmware compiled date: Tue Apr 15 10:01:27 KST 2014 PDA version: I9515XXU1AND3 CSC version: I9515DBT1AND1 SW version: I9515XXU1AND3 Phone IMEI: 352168068494748 Phone SN: RF8F815FS4K Android version: 4.4.2 (KOT49H) Reading info... Phone was not found on the selected port! Turn on "USB Debugging" option. Enter "*#0808#" number. Select "DM+Modem+ADB". this all ok how to set Set "Diag config" to "USB" value. in 4.4.2 version in "*#9090#" number plz guide.. |
Re-flash the phone, make Factory data reset and wipe cache partition, enter "*#0808#" number, select "DM+Modem+ADB" and try to read info via "Read info" button at "Main" tab in the Software. |
Welcome to Octoplus/Octopus Box Samsung software version 1.8.1 ----------------------------------------------------------------------------------- To connect GT-I9515 phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3.Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. 6. Go to dial window. 7. Enter "*#0808#" number. 8. Select "DM+Modem+ADB". 9. Press Home button. 10. Go to dial window. 11. Enter "*#9090#" number. 12. Set "Diag config" to "USB" value. 13. Restart phone. 14. Press "Read Info" in software. Selected firmware file: I9515XXU1AND3_I9515DBT1AND1_DBT_Germany_Android_4. 4.2.oct Please put the phone into Download Mode and connect USB cable. To put GT-I9515 into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Found phone on Firmware write started. Writing ABOOT section... ABOOT section has been written successfully. Writing SBL1 section... SBL1 section has been written successfully. Writing SBL2 section... SBL2 section has been written successfully. Writing SBL3 section... SBL3 section has been written successfully. Writing RPM section... RPM section has been written successfully. Writing TZ section... TZ section has been written successfully. Writing BOOT section... BOOT section has been written successfully. Writing RECOVERY section... RECOVERY section has been written successfully. Writing SYSTEM section... SYSTEM section has been written successfully. Writing MDM section... MDM section has been written successfully. Writing APNHLOS section... APNHLOS section has been written successfully. Writing CACHE section... CACHE section has been written successfully. Writing HIDDEN section... HIDDEN section has been written successfully. Writing PERSDATA section... PERSDATA section has been written successfully. Firmware writing successfully completed. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM1 Selected model: GT-I9515 Phone was not found on the selected port! Searching for USB diagnostic port... Connecting to phone on COM201 Mode: Emergency Welcome to Octoplus/Octopus Box Samsung software version 1.8.1 ----------------------------------------------------------------------------------- To connect GT-I9515 phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3.Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. 6. Go to dial window. 7. Enter "*#0808#" number. 8. Select "DM+Modem+ADB". 9. Press Home button. 10. Go to dial window. 11. Enter "*#9090#" number. 12. Set "Diag config" to "USB" value. 13. Restart phone. 14. Press "Read Info" in software. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM1 Selected model: GT-I9515 Phone was not found on the selected port! Searching for USB diagnostic port... No diagnostic ports found! Connecting to phone on COM3 Phone connection failed ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM1 Selected model: GT-I9515 Phone was not found on the selected port! Searching for USB diagnostic port... Connecting to phone on COM201 Port is busy Connecting to phone on COM202 Mode: Normal Phone model: GT-I9515 Firmware compiled date: Firmware compiled time: Firmware released date: -ù~ Firmware released time: SW version: ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM201 Selected model: GT-I9515 Phone was not found on the selected port! Searching for USB diagnostic port... Connecting to phone on COM201 Mode: Emergency ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM202 Selected model: GT-I9515 Port is busy Phone was not found on the selected port! Searching for USB diagnostic port... Connecting to phone on COM201 Port is busy Connecting to phone on COM202 Mode: Normal Phone model: GT-I9515 Firmware compiled date: Firmware compiled time: Firmware released date: -ù~ Firmware released time: SW version: ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM203 Selected model: GT-I9515 Phone was not found on the selected port! Searching for USB diagnostic port... Connecting to phone on COM201 Mode: Emergency ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM201 Selected model: GT-I9515 Port is busy Phone was not found on the selected port! Searching for USB diagnostic port... Connecting to phone on COM201 Mode: Emergency ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM1 Selected model: GT-I9515 Phone was not found on the selected port! Searching for USB diagnostic port... Connecting to phone on COM201 Mode: Emergency reflash ok make Factory data reset and wipe cache partition ok enter "*#0808#" number, select "DM+Modem+ADB" ok but read information in main softwear not boot |
Contact us to Skype or Yahoo! Messenger, we will look remotely, where can be the problem with your phone. Our contacts You can find in our profile. |
Ok thanx i will contect soon tommorow Thanx for the quick reply |
Welcome to Octoplus/Octopus Box Samsung software version 1.8.1 ----------------------------------------------------------------------------------- To connect GT-I9515 phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3.Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. 6. Go to dial window. 7. Enter "*#0808#" number. 8. Select "DM+Modem+ADB". 9. Press Home button. 10. Go to dial window. 11. Enter "*#9090#" number. 12. Set "Diag config" to "USB" value. 13. Restart phone. 14. Press "Read Info" in software. Selected firmware file: I9515XXU1AND3_I9515YJV1ANE1_KSA_Saudi_Arabia_Andro id_4.4.2.oct Please put the phone into Download Mode and connect USB cable. To put GT-I9515 into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Found phone on Firmware write started. Writing ABOOT section... ABOOT section has been written successfully. Writing SBL1 section... SBL1 section has been written successfully. Writing SBL2 section... SBL2 section has been written successfully. Writing SBL3 section... SBL3 section has been written successfully. Writing RPM section... RPM section has been written successfully. Writing TZ section... TZ section has been written successfully. Writing BOOT section... BOOT section has been written successfully. Writing RECOVERY section... RECOVERY section has been written successfully. Writing SYSTEM section... SYSTEM section has been written successfully. Writing MDM section... MDM section has been written successfully. Writing APNHLOS section... APNHLOS section has been written successfully. Writing CACHE section... CACHE section has been written successfully. Writing HIDDEN section... HIDDEN section has been written successfully. Firmware writing successfully completed. Selected firmware file: PIT_I9195XXUBML4_2340422_MULTI_CERT.oct Please put the phone into Download Mode and connect USB cable. To put GT-I9515 into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Found phone on Firmware write started. Writing PIT section... Writing Firmware Failed Please put the phone into Download Mode and connect USB cable. To put GT-I9515 into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Found phone on Firmware write started. Writing PIT section... Writing Firmware Failed flash compleat after hang on samsung now phone e: failled to mount/system(invalid argument) |
Why You have written firmware "PIT_I9195XXUBML4_2340422_MULTI_CERT.oct"? Fully charge phone's battery abd write another firmwares. |
Welcome to Octoplus/Octopus Box Samsung software version 1.8.1 ----------------------------------------------------------------------------------- To connect GT-I9515 phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3.Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. 6. Go to dial window. 7. Enter "*#0808#" number. 8. Select "DM+Modem+ADB". 9. Press Home button. 10. Go to dial window. 11. Enter "*#9090#" number. 12. Set "Diag config" to "USB" value. 13. Restart phone. 14. Press "Read Info" in software. Selected firmware file: PIT_I9195XXUBML4_2340422_MULTI_CERT.oct Please put the phone into Download Mode and connect USB cable. To put GT-I9515 into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Found phone on Firmware write started. Writing PIT section... Writing Firmware Failed battaer full charge but get this error |
Why You have wrietten firmware for GT-I9195 into your GT-I9515??? |
ohh ..just over looked the model @nazarkhan |
Welcome to Octoplus/Octopus Box Samsung software version 1.8.1 ----------------------------------------------------------------------------------- To connect GT-I9515 phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3.Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. 6. Go to dial window. 7. Enter "*#0808#" number. 8. Select "DM+Modem+ADB". 9. Press Home button. 10. Go to dial window. 11. Enter "*#9090#" number. 12. Set "Diag config" to "USB" value. 13. Restart phone. 14. Press "Read Info" in software. Selected firmware file: PIT_I9195XXUBML4_2340422_MULTI_CERT.oct Please put the phone into Download Mode and connect USB cable. To put GT-I9515 into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Found phone on Firmware write started. Writing PIT section... Writing Firmware Failed Selected firmware file: I9515XXU1AND3_I9515OXX1AND2_PHE_Spain_Android_4.4. 2.oct Please put the phone into Download Mode and connect USB cable. To put GT-I9515 into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Found phone on Firmware write started. Writing ABOOT section... ABOOT section has been written successfully. Writing SBL1 section... SBL1 section has been written successfully. Writing SBL2 section... SBL2 section has been written successfully. Writing SBL3 section... SBL3 section has been written successfully. Writing RPM section... RPM section has been written successfully. Writing TZ section... TZ section has been written successfully. Writing BOOT section... BOOT section has been written successfully. Writing RECOVERY section... RECOVERY section has been written successfully. Writing SYSTEM section... SYSTEM section has been written successfully. Writing MDM section... MDM section has been written successfully. Writing APNHLOS section... APNHLOS section has been written successfully. Writing CACHE section... CACHE section has been written successfully. Writing HIDDEN section... HIDDEN section has been written successfully. Firmware writing successfully completed. e: failled to mount/system(invalid argument) |
Make Factory data reset and wipe cache partition, and write other firmwares. Try to find PIT for this phone and write firmware with PIT. If the problem is the same, this can be HW issue. |
now phone hang in samsung |
| All times are GMT +1. The time now is 15:30. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -