SGH-M919 read codes via UART. all done!!!! Thx!!!!

[Drunya_L]

I enter *#7284# and select MODEM, then "read codes"

Welcome to Octoplus/Octopus Box Samsung software version 1.4.4
-----------------------------------------------------------------------------------
To connect SGH-M919 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Builds numbers" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Close window.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM2
Selected model: SGH-M919
Mode: Normal
Phone model: SGH-M919
Firmware compiled date: Mar 28 2013
Firmware compiled time: 09:00:00
Firmware released date: Apr 26 2013
Firmware released time: 18:24:03
Phone IMEI: 355537-05-766305-8
SW version: M9615A-CEFWTAZM-4.0.17062
Reading phone unlock codes. It can take some time, please wait...
Connecting to server...
Connect successfully to server
Checking smart card...
Smart card successfully checked
Checking operation...
Operation successfully checked
NCK unlock code: *#7465625*638*36185179#
NSCK unlock code: *#7465625*782*00000000#
SPCK unlock code: *#7465625*77*00000000#