Sm-g930p u6 [Answered] - GSM-Forum

fateh76dz · 10-21-2019, 11:08

Welcome to Octoplus Box Samsung software version 2.8.4
-----------------------------------------------------------------------------------

Platform: Samsung Android
Selected port: COM219
Selected model: SM-G930P
Operation: Unlock
Detected phone model: SM-G930P
Firmware compiled date: Tue Apr 17 21:12:21 KST 2018
PDA version: G930PVPU6BRD2
CSC version: G930PSPT6BRD2
SW version: G930PVPU6BRD2
Build number:
Phone SN: 00000000000
Android version: 7.0 (NRD90M)
Sales code: SPR
Country: USA
HW platform: msm8996
HW Chip: MSM8996
HW Modem: MSM8996
Security patch level: 2018-03-01
SIM 1 status: card io error
Codename: heroqltespr
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as Security-SM-G930P-21-10-2019_11-01-16 file
Installing service app...
Unlocking phone...
Finalizing...
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu.
Performed by 2.8.4 Software version.

SM-G930P U6 invalid card after unlock

Octopus support · 10-21-2019, 11:45

Hello.

Please try to use second method of Unlock operation and post here results.

fateh76dz · 10-21-2019, 11:55

Welcome to Octoplus Box Samsung software version 2.8.4
-----------------------------------------------------------------------------------
To connect SM-G930P phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM219
Selected model: SM-G930P
Operation: Unlock
Attention: The Unlock process may take up to 10 minutes, in some
cases period of waiting may be extended up to 48 hours!
Searching for a phone. Please wait...
Detected phone model: SM-G930P
Firmware compiled date: Tue Apr 17 21:12:21 KST 2018
PDA version: G930PVPU6BRD2
CSC version: G930PSPT6BRD2
SW version: G930PVPU6BRD2
Build number:
Phone SN: 00000000000
Android version: 7.0 (NRD90M)
Sales code: SPR
Country: USA
HW platform: msm8996
HW Chip: MSM8996
HW Modem: MSM8996
Security patch level: 2018-03-01
SIM 1 status: card io error
Codename: heroqltespr
Warranty Void:
Devices with Triggered Warranty bit are not supported!
Phone unlocking failed
Performed by 2.8.4 Software version.

NOTE UNLOCK

Octopus box · 10-21-2019, 12:31

Devices with Triggered Warranty bit are not supported!

reyxito · 10-21-2019, 12:51

Quote:

Originally Posted by fateh76dz

Welcome to Octoplus Box Samsung software version 2.8.4
-----------------------------------------------------------------------------------
To connect SM-G930P phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM219
Selected model: SM-G930P
Operation: Unlock
Attention: The Unlock process may take up to 10 minutes, in some
cases period of waiting may be extended up to 48 hours!
Searching for a phone. Please wait...
Detected phone model: SM-G930P
Firmware compiled date: Tue Apr 17 21:12:21 KST 2018
PDA version: G930PVPU6BRD2
CSC version: G930PSPT6BRD2
SW version: G930PVPU6BRD2
Build number:
Phone SN: 00000000000
Android version: 7.0 (NRD90M)
Sales code: SPR
Country: USA
HW platform: msm8996
HW Chip: MSM8996
HW Modem: MSM8996
Security patch level: 2018-03-01
SIM 1 status: card io error
Codename: heroqltespr
Warranty Void:
Devices with Triggered Warranty bit are not supported!
Phone unlocking failed
Performed by 2.8.4 Software version.

NOTE UNLOCK

Flash combination and try again then full stock

Enviado desde mi SM-N975F mediante Tapatalk

10-21-2019, 11:08	#1 (permalink)
fateh76dz No Life Poster Join Date: Feb 2004 Location: -Algeria- Age: 47 Posts: 1,055 Member: 51746 Status: Offline Thanks Meter: 47	Sm-g930p u6 [Answered] Welcome to Octoplus Box Samsung software version 2.8.4 ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM219 Selected model: SM-G930P Operation: Unlock Detected phone model: SM-G930P Firmware compiled date: Tue Apr 17 21:12:21 KST 2018 PDA version: G930PVPU6BRD2 CSC version: G930PSPT6BRD2 SW version: G930PVPU6BRD2 Build number: Phone SN: 00000000000 Android version: 7.0 (NRD90M) Sales code: SPR Country: USA HW platform: msm8996 HW Chip: MSM8996 HW Modem: MSM8996 Security patch level: 2018-03-01 SIM 1 status: card io error Codename: heroqltespr Checking Root: Phone is Rooted. Reading security backup, please wait... Backup saved as Security-SM-G930P-21-10-2019_11-01-16 file Installing service app... Unlocking phone... Finalizing... Phone is successfully unlocked To finish the operation, please restart the phone via phone's menu. Performed by 2.8.4 Software version. SM-G930P U6 invalid card after unlock

10-21-2019, 11:45	#2 (permalink)
Octopus support Product Supporter Join Date: Jan 2019 Location: USA, New York Posts: 10,160 Member: 2891705 Status: Offline Thanks Meter: 2,141	Hello. Please try to use second method of Unlock operation and post here results.

10-21-2019, 11:55	#3 (permalink)
fateh76dz No Life Poster Join Date: Feb 2004 Location: -Algeria- Age: 47 Posts: 1,055 Member: 51746 Status: Offline Thanks Meter: 47	Welcome to Octoplus Box Samsung software version 2.8.4 ----------------------------------------------------------------------------------- To connect SM-G930P phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3. Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM219 Selected model: SM-G930P Operation: Unlock Attention: The Unlock process may take up to 10 minutes, in some cases period of waiting may be extended up to 48 hours! Searching for a phone. Please wait... Detected phone model: SM-G930P Firmware compiled date: Tue Apr 17 21:12:21 KST 2018 PDA version: G930PVPU6BRD2 CSC version: G930PSPT6BRD2 SW version: G930PVPU6BRD2 Build number: Phone SN: 00000000000 Android version: 7.0 (NRD90M) Sales code: SPR Country: USA HW platform: msm8996 HW Chip: MSM8996 HW Modem: MSM8996 Security patch level: 2018-03-01 SIM 1 status: card io error Codename: heroqltespr Warranty Void: Devices with Triggered Warranty bit are not supported! Phone unlocking failed Performed by 2.8.4 Software version. NOTE UNLOCK

10-21-2019, 12:31	#4 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,846 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,412	Devices with Triggered Warranty bit are not supported!