Repair IMEI GT-S5670 question [Answered]

[yasserwithyou]

Welcome to Octoplus Box Samsung software version 2.6.4
-----------------------------------------------------------------------------------
To connect GT-S5670 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "Modem" value.
8. Press Home button.
9. Go to dial window.
10. Enter "*#9090# or *#0808#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM30
Selected model: GT-S5670
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM30
Mode: Emergency
Performed by 2.6.4 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM30
Selected model: GT-S5670
Mode: Emergency
Codes for GT-S5670 phone in emergency mode can’t be read
Performed by 2.6.4 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM30
Selected model: GT-S5670
Mode: Emergency
Codes for GT-S5670 phone in emergency mode can’t be read
Performed by 2.6.4 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM30
Selected model: GT-S5670
Mode: Emergency
Write IMEI failed
Performed by 2.6.4 Software version.


please help

[Octopus box]

Hello.

Before perform "Repair IMEI" operation, You need to connect the device correctly:

To connect GT-S5670 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "Modem" value.
8. Press Home button.
9. Go to dial window.
10. Enter "*#9090# or *#0808#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.