need help in g930fd reset factry reset [Answered]

[ranagaurav]

phone volume key is damage after flash show no cammand
need help how to reset phone without key
phone have u4 bainry support have u1 file plz arrange inbuild user date file

Welcome to Octoplus Box Samsung software version 2.6.9
-----------------------------------------------------------------------------------
To connect SM-G930FD phone you have to perform the following
steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Selected firmware file: g930fxxu1apdq_g930folb1apd1_mm1_android_
6.0.1.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-G930FD into Download Mode, You have to perform the
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing Firmware Failed
Performed by 2.6.9 Software version.

[ranagaurav]

[ranagaurav]

No any solution In world ?

[allumts]

First of all repair Volume Key.

And how want flash Binary 1 fw in device with Binary 4? you kill device Downgrading from bit 4 to 1

For Right firmwares there are a lot of FREE site from where dondload Bit 4 Firmware, use your mind.

[ranagaurav]

Originally Posted by allumts

first of all repair volume key.

And how want flash binary 1 fw in device with binary 4? You kill device downgrading from bit 4 to 1

For right firmwares there are a lot of free site from where dondload bit 4 firmware, use your mind.

i downlode latest firmwer after flash same problem no command
when i salect ap file [when i extrect no have user date file]
without user data file how to do or
volume key is not repairble