GSM-Forum - Unable to read code g965U bit 9 [Answered]

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Octopus Samsung/Octoplus Samsung (https://forum.gsmhosting.com/vbb/f684/)

- - Unable to read code g965U bit 9 [Answered] (https://forum.gsmhosting.com/vbb/f684/unable-read-code-g965u-bit-9-answered-3073783/)

Unable to read code g965U bit 9 [Answered]

Hello team i can't read network unlock code from this device i tried more than three firmware but not luck even i flash with this firmware that someone report success but failed when i tried with that firmware i need help here

Quote:

Work ID: 000000000192733B
Starting Read Codes (Jul.2021)
Selected model: SM-G965U
Please, don't run any other third party Softwares or start any other operations which can use your CPU/RAM resources during the operation!
Devices with Unlock App (branded to T-Mobile, MetroPCS, etc.) are not supported! Make sure device requests to enter unlock code and only then perform "Read Codes" operation! Do you want to continue?
Searching ADB devices...
Press "OK" button on the device to allow USB debugging
Reading info...
Detected model: SM-G965U
Fingerprint: samsung/star2qltesq/star2qltesq:10/QP1A.190711.020/G965USQS9FUA3:user/release-keys
Firmware compiled date: Thu Dec 31 17:22:11 KST 2020
PDA version: G965USQS9FUA3
CSC version: G965UOYN9FUA3
SW version: G965USQS9FUA3
Build number: 17847038
Phone SN: 324c455533393098
Android version: 10 (QP1A.190711.020)
Sales code: ATT
Country: USA
HW platform: qcom
HW Chip: sdm845
HW Modem: REV1.1
Security patch level: 2021-01-01
Warranty Void: 0
Codename: star2qltesq
SIM 1 status: ABSENT
SIM 2 status: ABSENT
Modem board: SDM845
Rebooting device...
Searching ADB devices...
Rebooting device...
Searching ADB devices...
Connecting to server...
Username: oct3989
Your balance: 100 credits
Searching modem port...
Please type *#0808# or ##3424# on your phone and select 'DM + MODEM + ADB'. After that press 'Ok' to continue operation... *Phone's dialog window may not appear, in that case ignore this step
Searching modem port...
Starting exploit...
Rebooting device to Upload Mode...
Searching upload mode interface...
Reading upload mode data. This may take a while...
Rebooting device...
Searching EFS data...
Searching Lock data...
Detected High Lock data version
Read Codes (Jul.2021) is not supported for this device
Execution time 4 minute(s) 41 second(s)
Performed by 4.0.5.2 Software version.

Here is success report with all same condition bit and security https://forum.gsmhosting.com/vbb/f68...-done-2999691/

Best Regards | Yoba

Hello.

Please, try to perform Read codes operation with 3.0.7.2 Samsung software version and post here log.

Quote:

Originally Posted by Octopus box (Post 14647048)

Hello.

Please, try to perform Read codes operation with 3.0.7.2 Samsung software version and post here log.

I don't have 3.0.7.2 but here is log with 3.0.7.4 fail

Quote:

Work ID: 00000000019F2799
Platform: Samsung Android
Selected port:
Selected model: SM-G965U
Operation: Read Codes - General
"Devices with Unlock App (branded to T-Mobile, MetroPCS, etc.) are not supported!

Make sure device requests to enter unlock code and only then perform “Read Codes” operation!"

Continue?
Searching for a phone. Please wait...
Detected phone model: SM-G965U
Firmware compiled date: Thu Dec 31 17:22:11 KST 2020
PDA version: G965USQS9FUA3
CSC version: G965UOYN9FUA3
SW version: G965USQS9FUA3
Build number: 17847038
Android version: 10 (QP1A.190711.020)
Sales code: ATT
Country: USA
HW platform: sdm845
HW Chip: unknown
HW Modem: SDM845
Security patch level: 2021-01-01
Warranty Void: 0
SIM 1 status: absent
Codename: star2qltesq
-----------------------------------------------------------------------------------
Connecting to server ..
Username: oct3989
Connect to server successfull.
Checking smart card...
Your balance: 100 credits.
-----------------------------------------------------------------------------------
Detecting high security level.
Rebooting phone in Upload Mode...
Searching for USB diagnostic port...
Reading info...
Mode: Normal
Firmware compiled date: Oct 22 2020
Firmware compiled time: 05:00:00
Firmware released date: Dec 30 2020
Firmware released time: 06:43:33
SW Version: MPSS.AT.4.0.c2.1-00545-SDM845_GEN_PACK-2.339154.2
Searching for a phone. Please wait...OK
Reading data...OK
Detecting security type...
Data error (0x00000011)
Read codes failed
Performed by 3.0.7.4 Software version.

Do i have to look for that exact version?

Best Regards | Yoba

Try to reflash the phone with another same firmware (with same bit security) then repeat the operation.

Quote:

Originally Posted by Octopus box (Post 14648816)

Try to reflash the phone with another same firmware (with same bit security) then repeat the operation.

Here is log with another firmware

Quote:

Starting Read Codes (Jul.2021)
Selected model: SM-G965U
Please, don't run any other third party Softwares or start any other operations which can use your CPU/RAM resources during the operation!
Devices with Unlock App (branded to T-Mobile, MetroPCS, etc.) are not supported! Make sure device requests to enter unlock code and only then perform "Read Codes" operation! Do you want to continue?
Searching ADB devices...
Press "OK" button on the device to allow USB debugging
Reading info...
Detected model: SM-G965U
Fingerprint: samsung/star2qltesq/star2qltesq:10/QP1A.190711.020/G965USQS9FUB2:user/release-keys
Firmware compiled date: Sat Jan 30 19:34:11 KST 2021
PDA version: G965USQS9FUB2
CSC version: G965UOYN9FUB2
SW version: G965USQS9FUB2
Build number: 18085849
Phone SN: 324c455533393098
Android version: 10 (QP1A.190711.020)
Sales code: ATT
Country: USA
HW platform: qcom
HW Chip: sdm845
HW Modem: REV1.1
Security patch level: 2021-02-01
Warranty Void: 0
Codename: star2qltesq
SIM 1 status: ABSENT
SIM 2 status: ABSENT
Modem board: SDM845
Rebooting device...
Searching ADB devices...
Rebooting device...
Searching ADB devices...
Connecting to server...
Username: oct3989
Your balance: 100 credits
Searching modem port...
Please type *#0808# or ##3424# on your phone and select 'DM + MODEM + ADB'. After that press 'Ok' to continue operation... *Phone's dialog window may not appear, in that case ignore this step
Searching modem port...
Starting exploit...
Rebooting device to Upload Mode...
Searching upload mode interface...
Reading upload mode data. This may take a while...
Rebooting device...
Searching EFS data...
Searching Lock data...
Detected High Lock data version
Read Codes (Jul.2021) is not supported for this device
Execution time 5 minute(s) 23 second(s)
Performed by 4.0.5.2 Software version.

Still failed help please

Unfortunately, Detected High Lock data version.

Read Codes (Jul.2021) is not supported for this device.