J727p u6 rebooting problem [Answered] - GSM-Forum

yahqoobb · 08-30-2019, 07:36

I flash binary 6 on my phone then started rebooting. it was working fine before , I just want to upgrade the phone

Octopus box · 08-30-2019, 07:56

Try to reflash ypur device with another stock firmware or try to do Hard Reset via button combination

yahqoobb · 08-30-2019, 08:08

I dounloaded another firmware but the same thing. like there is one one firmware for U6 everywhere. and the phone can enter into recovery

Octopus box · 08-30-2019, 08:38

Unfortuantely, we don't have any special solution for your type of issue

hussein1 · 09-07-2019, 17:57

Platform: Samsung Android
Selected port: COM760
Selected model: SM-J727P
Operation: Read info
Reading info, please wait...
Detected phone model: SM-J727P
Firmware compiled date: Thu Mar 8 16:27:16 KST 2018
PDA version: J727PVPU3ARC2
CSC version: J727PSPT3ARC2
SW version: J727PVPU3ARC2
Phone SN: 00000000000
Android version: 7.0 (NRD90M)
Sales code: BST
Country: USA
HW platform: msm8953
HW Chip: MSM8953
HW Modem: MSM8953
Security patch level: 2018-03-01
Warranty Void: 0
SIM 1 status: absent
Codename: j7popltespr
Performed by 2.8.2.2 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM760
Selected model: SM-J727P
Operation: Unlock
Attention: The Unlock process may take up to 10 minutes, in some cases period of waiting may be extended up to 48 hours!
Searching for a phone. Please wait...
Detected phone model: SM-J727P
Firmware compiled date: Thu Mar 8 16:27:16 KST 2018
PDA version: J727PVPU3ARC2
CSC version: J727PSPT3ARC2
SW version: J727PVPU3ARC2
Phone SN: 00000000000
Android version: 7.0 (NRD90M)
Sales code: BST
Country: USA
HW platform: msm8953
HW Chip: MSM8953
HW Modem: MSM8953
Security patch level: 2018-03-01
Warranty Void: 0
SIM 1 status: absent
Codename: j7popltespr
Connecting to modem port...
Found phone on COM760
Reading IMEI...OK
-----------------------------------------------------------------------------------
Connecting to server...OK
Checking smart card...OK
Username: xxxx
Authorizing...OK
Checking balance...OK
Checking operation...OK
Your balance: 530 credits.
-----------------------------------------------------------------------------------
Sending device information...OK
Initializing exploit...OK
Preparing phone..OK
Phone will restart now. Please don't disconnect cable!
Searching for a phone. Please wait...
Initializing...
Cannot start AT sender
Phone unlocking failed
Performed by 2.8.2.2 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM760
Selected model: SM-J727P
Operation: Unlock
Attention: The Unlock process may take up to 10 minutes, in some cases period of waiting may be extended up to 48 hours!
Searching for a phone. Please wait...
Detected phone model: SM-J727P
Firmware compiled date: Thu Mar 8 16:27:16 KST 2018
PDA version: J727PVPU3ARC2
CSC version: J727PSPT3ARC2
SW version: J727PVPU3ARC2
Phone SN: 00000000000
Android version: 7.0 (NRD90M)
Sales code: BST
Country: USA
HW platform: msm8953
HW Chip: MSM8953
HW Modem: MSM8953
Security patch level: 2018-03-01
Warranty Void: 0
SIM 1 status: absent
Codename: j7popltespr
Connecting to modem port...
Found phone on COM760
Reading IMEI...OK
-----------------------------------------------------------------------------------
Connecting to server...OK
Checking smart card...OK
Username: xxxxxx
Authorizing...OK
Checking balance...OK
Checking operation...OK
Your balance: 530 credits.
-----------------------------------------------------------------------------------
Sending device information...OK
Initializing exploit...OK
Preparing phone..OK
Phone will restart now. Please don't disconnect cable!
Searching for a phone. Please wait...
Initializing...OK
Unlocking phone...OK
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu.
Performed by 2.8.2.2 Software version.

08-30-2019, 07:36	#1 (permalink)
yahqoobb Freak Poster Join Date: Jan 2013 Posts: 118 Member: 1872263 Status: Offline Thanks Meter: 3	J727p u6 rebooting problem [Answered] I flash binary 6 on my phone then started rebooting. it was working fine before , I just want to upgrade the phone

09-07-2019, 17:57	#5 (permalink)
hussein1 Freak Poster Join Date: Feb 2007 Location: usa Posts: 240 Member: 444048 Status: Offline Thanks Meter: 52	j727p boost mobile Platform: Samsung Android Selected port: COM760 Selected model: SM-J727P Operation: Read info Reading info, please wait... Detected phone model: SM-J727P Firmware compiled date: Thu Mar 8 16:27:16 KST 2018 PDA version: J727PVPU3ARC2 CSC version: J727PSPT3ARC2 SW version: J727PVPU3ARC2 Phone SN: 00000000000 Android version: 7.0 (NRD90M) Sales code: BST Country: USA HW platform: msm8953 HW Chip: MSM8953 HW Modem: MSM8953 Security patch level: 2018-03-01 Warranty Void: 0 SIM 1 status: absent Codename: j7popltespr Performed by 2.8.2.2 Software version. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM760 Selected model: SM-J727P Operation: Unlock Attention: The Unlock process may take up to 10 minutes, in some cases period of waiting may be extended up to 48 hours! Searching for a phone. Please wait... Detected phone model: SM-J727P Firmware compiled date: Thu Mar 8 16:27:16 KST 2018 PDA version: J727PVPU3ARC2 CSC version: J727PSPT3ARC2 SW version: J727PVPU3ARC2 Phone SN: 00000000000 Android version: 7.0 (NRD90M) Sales code: BST Country: USA HW platform: msm8953 HW Chip: MSM8953 HW Modem: MSM8953 Security patch level: 2018-03-01 Warranty Void: 0 SIM 1 status: absent Codename: j7popltespr Connecting to modem port... Found phone on COM760 Reading IMEI...OK ----------------------------------------------------------------------------------- Connecting to server...OK Checking smart card...OK Username: xxxx Authorizing...OK Checking balance...OK Checking operation...OK Your balance: 530 credits. ----------------------------------------------------------------------------------- Sending device information...OK Initializing exploit...OK Preparing phone..OK Phone will restart now. Please don't disconnect cable! Searching for a phone. Please wait... Initializing... Cannot start AT sender Phone unlocking failed Performed by 2.8.2.2 Software version. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM760 Selected model: SM-J727P Operation: Unlock Attention: The Unlock process may take up to 10 minutes, in some cases period of waiting may be extended up to 48 hours! Searching for a phone. Please wait... Detected phone model: SM-J727P Firmware compiled date: Thu Mar 8 16:27:16 KST 2018 PDA version: J727PVPU3ARC2 CSC version: J727PSPT3ARC2 SW version: J727PVPU3ARC2 Phone SN: 00000000000 Android version: 7.0 (NRD90M) Sales code: BST Country: USA HW platform: msm8953 HW Chip: MSM8953 HW Modem: MSM8953 Security patch level: 2018-03-01 Warranty Void: 0 SIM 1 status: absent Codename: j7popltespr Connecting to modem port... Found phone on COM760 Reading IMEI...OK ----------------------------------------------------------------------------------- Connecting to server...OK Checking smart card...OK Username: xxxxxx Authorizing...OK Checking balance...OK Checking operation...OK Your balance: 530 credits. ----------------------------------------------------------------------------------- Sending device information...OK Initializing exploit...OK Preparing phone..OK Phone will restart now. Please don't disconnect cable! Searching for a phone. Please wait... Initializing...OK Unlocking phone...OK Phone is successfully unlocked To finish the operation, please restart the phone via phone's menu. Performed by 2.8.2.2 Software version.

08-30-2019, 07:56	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,850 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	Try to reflash ypur device with another stock firmware or try to do Hard Reset via button combination

08-30-2019, 08:08	#3 (permalink)
yahqoobb Freak Poster Join Date: Jan 2013 Posts: 118 Member: 1872263 Status: Offline Thanks Meter: 3	I dounloaded another firmware but the same thing. like there is one one firmware for U6 everywhere. and the phone can enter into recovery

08-30-2019, 08:38	#4 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,850 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	Unfortuantely, we don't have any special solution for your type of issue