[Answered] Zte Mf253v

[cellcarcol]

like connect this routerto portatil, via usb o rj45.

[links141]

First use rj45, then usb


Sent from my iPhone using Tapatalk

[TestBox2]

1. Connect mdem to RG45 and run web-dashboard.
2. Run Mkey , select ZTE, and press R-button (refrash comports).
- Mkey send command via HTTP request for open comport and after install drivers.
3. Next use MF253V_CLAROCOMF253VV1.0.0B01_BL_FW_Columbia.cbin firmware file for flash/repair/unlock/debrand your modem.


All done.

[bashsnk]

Can use explain more and where can I get the files thanks

[TestBox2]

Originally Posted by bashsnk

Can use explain more and where can I get the files thanks

From me or from mkey support area.

http://www.mediafire.com/file/qckyda...L_FW.cbin/file

http://www.mediafire.com/file/hjj451...mbia.cbin/file

[cellcarcol]

Originally Posted by TestBox2

From me or from mkey support area.

MF253V_MTN_BD_MTNMF253VV1.0.0B04_BL_FW

MF253V_CLAROCOMF253VV1.0.0B01_BL_FW_Columbia

You know I appreciate it.

but it's worth supporting everything you say, but you can't work anything.

It does not let flash, need credits
To buy credits is very complicated.

that should improve

[bashsnk]

My MF253V did not show install drivers when connected to pc and HTTP ports does not open also .


Sent from my iPhone using Tapatalk

[alirazamanzoor]

Originally Posted by bashsnk

My MF253V did not show install drivers when connected to pc and HTTP ports does not open also .


Sent from my iPhone using Tapatalk

Zte New firmware come with new security ,so the new firmware have high security to do this
you need rj45 + type A to type A cable .
1-found boot pin interface (Diag interface) not 9008 (bootpin is near to rom chip)
2-download qtools and load bootloader with (./qdload -p /dev/ttyUSB0 -i)
3-delete kernel with the help of qwdirect ,kernel image start from block 387 and size of block is 52. reboot device with "c b" command .
4-device will show Adb interface in device manager
5-download zte offical firmware from eassyfirmware and flash it with fastboot.flash only(modem,boot,system)
for example .
fastboot erase system
fastboot flash system mdm9607-sysfs.ubi
and so on................
for partition table you can see "zte_dload_explain.xml"
at last step execute
fastboot reboot
as a rezult 3 comport will appear ,open the ZTE terminal software and choose the SUF_DL_MF253VV1.00.00.zas file and click on start and done it .

[bashsnk]

Can you do it remotely on my pc with my help thanks


Sent from my iPhone using Tapatalk

[cmaster]

Originally Posted by alirazamanzoor

Zte New firmware come with new security ,so the new firmware have high security to do this
you need rj45 + type A to type A cable .
1-found boot pin interface (Diag interface) not 9008 (bootpin is near to rom chip)
2-download qtools and load bootloader with (./qdload -p /dev/ttyUSB0 -i)
3-delete kernel with the help of qwdirect ,kernel image start from block 387 and size of block is 52. reboot device with "c b" command .
4-device will show Adb interface in device manager
5-download zte offical firmware from eassyfirmware and flash it with fastboot.flash only(modem,boot,system)
for example .
fastboot erase system
fastboot flash system mdm9607-sysfs.ubi
and so on................
for partition table you can see "zte_dload_explain.xml"
at last step execute
fastboot reboot
as a rezult 3 comport will appear ,open the ZTE terminal software and choose the SUF_DL_MF253VV1.00.00.zas file and click on start and done it .

So easy to unlock but make it very difficult ..... contact me for easy unlocking.


cmastar

[alirazamanzoor]

Originally Posted by cmaster

So easy to unlock but make it very difficult ..... contact me for easy unlocking.


cmastar

i have single click method without open (zte framwork) but not for public .

[ysraeldark]

Originally Posted by alirazamanzoor

i have single click method without open (zte framwork) but not for public .

hi men please inbox me for solution its unlock modem zte