huawei e5573cs-609 E5573CS_21.329.63.00.284_FW_2 dead after flashing - GSM-Forum

cool.maddy1920 · 02-23-2019, 13:40

huawei E5573cs-609 flashed with mkey file E5573CS_21.329.63.00.284_FW and now it dead plz help

log

17.45.46 : --------------- Read device information -----------------------
17.45.51 : DLOADVER : 2.0
17.45.52 : Model : E5573Cs-609
17.45.53 : IMEI : 868***********
17.45.54 : SwVers : 21.329.63.00.284
17.45.54 : IsoVers : WEBUI
17.45.54 : PrdName : E5573Cs-609
17.45.54 : DloadType : 0
17.45.55 : Auth.Vers: : 2
17.45.55 : New HiSi-TYPE 2 Identified.
17.45.59 : Open Flashing Protocol OK..
17.46.21 : 17.46.29 : SignAuth = Done
17.46.31 : --------------- Flash-mode operations ------------------------
17.46.33 : Verify download mode: 7200B--SKCBADZM
17.46.35 : Detected: [EHUAWEI BV7R11EU8]
17.46.39 : HiSilicon CPU mode-3 Selected.
17.46.40 : Write Part1...[FastBoot] Ok
17.46.44 : Write Part2...[M3BOOT] Ok
17.46.48 : Write Part3...[PtableTail] Ok
17.46.53 : Write Part4...[Kernel] Ok
17.47.03 : Write Part5...[VxWorks] Ok
17.47.14 : Write Part6...[M3Image] Ok
17.47.20 : Write Part7...[DSP] Ok
17.47.27 : Write Part8...[NVTable] Ok
17.47.33 : Write Part9...[System] Ok
17.47.51 : Write Part10...[Kernel]
17.47.57 : Init device...ERROR!

it stopped and device also stopped blinking light bettery was charged and i didnt disconnect the cable also where did i went wrrong .... xpert plz help

**TestBox2** · 02-24-2019, 14:36

Quote:

Originally Posted by cool.maddy1920

huawei E5573cs-609 flashed with mkey file E5573CS_21.329.63.00.284_FW and now it dead plz help

log

17.45.46 : --------------- Read device information -----------------------
17.45.51 : DLOADVER : 2.0
17.45.52 : Model : E5573Cs-609
17.45.53 : IMEI : 868***********
17.45.54 : SwVers : 21.329.63.00.284
17.45.54 : IsoVers : WEBUI
17.45.54 : PrdName : E5573Cs-609
17.45.54 : DloadType : 0
17.45.55 : Auth.Vers: : 2
17.45.55 : New HiSi-TYPE 2 Identified.
17.45.59 : Open Flashing Protocol OK..
17.46.21 : 17.46.29 : SignAuth = Done
17.46.31 : --------------- Flash-mode operations ------------------------
17.46.33 : Verify download mode: 7200B--SKCBADZM
17.46.35 : Detected: [EHUAWEI BV7R11EU8]
17.46.39 : HiSilicon CPU mode-3 Selected.
17.46.40 : Write Part1...[FastBoot] Ok
17.46.44 : Write Part2...[M3BOOT] Ok
17.46.48 : Write Part3...[PtableTail] Ok
17.46.53 : Write Part4...[Kernel] Ok
17.47.03 : Write Part5...[VxWorks] Ok
17.47.14 : Write Part6...[M3Image] Ok
17.47.20 : Write Part7...[DSP] Ok
17.47.27 : Write Part8...[NVTable] Ok
17.47.33 : Write Part9...[System] Ok
17.47.51 : Write Part10...[Kernel]
17.47.57 : Init device...ERROR!

it stopped and device also stopped blinking light bettery was charged and i didnt disconnect the cable also where did i went wrrong .... xpert plz help

You need write compatible fw only, or find what fw are compatible.

BootPoint too):
E5573cs_All_EOL_21.318.99.03.00_21.318.03.00.00_BL _FW_CD_TRIPLE

cool.maddy1920 · 02-25-2019, 08:38

Quote:

Originally Posted by TestBox2

You need write compatible fw only, or find what fw are compatible.

BootPoint too):
E5573cs_All_EOL_21.318.99.03.00_21.318.03.00.00_BL _FW_CD_TRIPLE

13.04.54 : --------------- Read device information -----------------------
13.04.55 : DEAD Mode Detected = True
13.05.00 : ----------------------------------
13.05.00 : Init Rom .. 00FF0100000F60100000007F Chk. Error!
13.05.00 : ERROR Repair BOOTCORE!

now......?

alirazamanzoor · 02-25-2019, 09:45

Quote:

Originally Posted by cool.maddy1920

13.04.54 : --------------- Read device information -----------------------
13.04.55 : DEAD Mode Detected = True
13.05.00 : ----------------------------------
13.05.00 : Init Rom .. 00FF0100000F60100000007F Chk. Error!
13.05.00 : ERROR Repair BOOTCORE!

now......?

rewrite this firmware via balong_flash
https://easy-firmware.com/index.php?...file&id=115191
https://easy-firmware.com/index.php?...file&id=115192
https://github.com/for***2/balongfla...nbuild/Release

**TestBox2** · 02-28-2019, 18:58

E5573CS_21.329.63.00.284_FW.cbin (35.16MB)
https://www.sendspace.com/file/4guc6p

CRM · 04-15-2019, 16:37

I Also did same process and my router is also dead..
My Router Version
21.329.63.00.284
Tried This File And Now Dead
E5573CS_21.329.63.00.284_FW.cbin
20.49.08 : DLOADVER : 2.0
20.49.09 : Model : ~žL~
20.49.11 : IMEI : 123456789123456
20.49.11 : SwVers : 21.329.63.00.284
20.49.11 : IsoVers : WEBUI
20.49.11 : PrdName : BV7R11EU8
20.49.11 : DloadType : 1
20.49.12 : Auth.Vers: : 2
20.49.12 : New HiSi-TYPE 2 Identified.
20.49.16 : Open Flashing Protocol OK..
20.49.38 :
20.49.47 : SignAuth = Done
20.49.51 : Verify download mode: 7200B--SKCBADZM
20.49.53 : Detected: [EHUAWEI BV7R11EU8]
20.49.58 : HiSilicon CPU mode-3 Selected.
20.49.59 : Write Part1...[FastBoot] Ok
20.50.04 : Write Part2...[M3BOOT] Ok
20.50.09 : Write Part3...[PtableTail] Ok
20.50.15 : Write Part4...[Kernel] Ok
20.50.26 : Write Part5...[VxWorks] Ok
20.50.37 : Write Part6...[M3Image] Ok
20.50.44 : Write Part7...[DSP] Ok
20.50.52 : Write Part8...[NVTable] Ok
20.50.59 : Write Part9...[System] Ok
20.51.19 : Write Part10...[Kernel]
20.51.26 : Init device...ERROR!

tried this file
E5573cs_All_EOL_21.318.99.03.00_21.318.03.00.00_BL _FW_CD_TRIPLE
21.00.50 : --------------- Read device information -----------------------
21.00.52 : DEAD Mode Detected = True
21.00.55 : ----------------------------------
21.00.55 : Init Rom .. 00FF0100000F60100000007F Chk. Error!
21.00.55 : ERROR Repair BOOTCORE!

Tried This File Also but same
E5573cs-322_21.318.99.03.00_BL_FW
21.03.53 : --------------- Read device information -----------------------
21.03.54 : DEAD Mode Detected = True
21.03.57 : ----------------------------------
21.03.57 : Init Rom .. 00FF0100000F60100000007F Chk. Error!
21.03.57 : ERROR Repair BOOTCORE!

Tried This File Also But Same
E5573CS_21.329.63.00.284_FW.cbin (35.16MB)
21.04.28 : --------------- Read device information -----------------------
21.04.29 : DEAD Mode Detected = True
21.04.30 : - No PACKAGE for Repair Found!
21.04.30 : ERROR Repair BOOTCORE!

Now Any Way alive It...

**TestBox2** · 04-17-2019, 17:42

1. E5573CS_21.329.63.00.284_FW.cbin Need use for simple write without biot mode.

2. Flash files what marking with 'BL' - have loader inside and able to use in the bootpoint.

CRM · 05-01-2019, 06:33

Quote:

Originally Posted by TestBox2

1. E5573CS_21.329.63.00.284_FW.cbin Need use for simple write without biot mode.

2. Flash files what marking with 'BL' - have loader inside and able to use in the bootpoint.

so now their is any way to recover it from dead...

02-23-2019, 13:40	#1 (permalink)
cool.maddy1920 Freak Poster Join Date: May 2010 Location: karnataka Posts: 124 Member: 1313327 Status: Offline Sonork: 100.1650723 Thanks Meter: 11	huawei e5573cs-609 E5573CS_21.329.63.00.284_FW_2 dead after flashing huawei E5573cs-609 flashed with mkey file E5573CS_21.329.63.00.284_FW and now it dead plz help log 17.45.46 : --------------- Read device information ----------------------- 17.45.51 : DLOADVER : 2.0 17.45.52 : Model : E5573Cs-609 17.45.53 : IMEI : 868*********** 17.45.54 : SwVers : 21.329.63.00.284 17.45.54 : IsoVers : WEBUI 17.45.54 : PrdName : E5573Cs-609 17.45.54 : DloadType : 0 17.45.55 : Auth.Vers: : 2 17.45.55 : New HiSi-TYPE 2 Identified. 17.45.59 : Open Flashing Protocol OK.. 17.46.21 : 17.46.29 : SignAuth = Done 17.46.31 : --------------- Flash-mode operations ------------------------ 17.46.33 : Verify download mode: 7200B--SKCBADZM 17.46.35 : Detected: [EHUAWEI BV7R11EU8] 17.46.39 : HiSilicon CPU mode-3 Selected. 17.46.40 : Write Part1...[FastBoot] Ok 17.46.44 : Write Part2...[M3BOOT] Ok 17.46.48 : Write Part3...[PtableTail] Ok 17.46.53 : Write Part4...[Kernel] Ok 17.47.03 : Write Part5...[VxWorks] Ok 17.47.14 : Write Part6...[M3Image] Ok 17.47.20 : Write Part7...[DSP] Ok 17.47.27 : Write Part8...[NVTable] Ok 17.47.33 : Write Part9...[System] Ok 17.47.51 : Write Part10...[Kernel] 17.47.57 : Init device...ERROR! it stopped and device also stopped blinking light bettery was charged and i didnt disconnect the cable also where did i went wrrong .... xpert plz help

02-28-2019, 18:58	#5 (permalink)
TestBox2 Product Manager Join Date: May 2008 Location: Ukraine Age: 45 Posts: 3,234 Member: 772096 Status: Offline Sonork: 100.69222 Thanks Meter: 8,277	E5573CS_21.329.63.00.284_FW.cbin (35.16MB) https://www.sendspace.com/file/4guc6p

04-15-2019, 16:37	#6 (permalink)
CRM Freak Poster Join Date: Dec 2009 Location: @India Posts: 476 Member: 1176826 Status: Offline Sonork: 100.1604160 Thanks Meter: 60	I Also did same process and my router is also dead.. My Router Version 21.329.63.00.284 Tried This File And Now Dead E5573CS_21.329.63.00.284_FW.cbin 20.49.08 : DLOADVER : 2.0 20.49.09 : Model : ~žL~ 20.49.11 : IMEI : 123456789123456 20.49.11 : SwVers : 21.329.63.00.284 20.49.11 : IsoVers : WEBUI 20.49.11 : PrdName : BV7R11EU8 20.49.11 : DloadType : 1 20.49.12 : Auth.Vers: : 2 20.49.12 : New HiSi-TYPE 2 Identified. 20.49.16 : Open Flashing Protocol OK.. 20.49.38 : 20.49.47 : SignAuth = Done 20.49.51 : Verify download mode: 7200B--SKCBADZM 20.49.53 : Detected: [EHUAWEI BV7R11EU8] 20.49.58 : HiSilicon CPU mode-3 Selected. 20.49.59 : Write Part1...[FastBoot] Ok 20.50.04 : Write Part2...[M3BOOT] Ok 20.50.09 : Write Part3...[PtableTail] Ok 20.50.15 : Write Part4...[Kernel] Ok 20.50.26 : Write Part5...[VxWorks] Ok 20.50.37 : Write Part6...[M3Image] Ok 20.50.44 : Write Part7...[DSP] Ok 20.50.52 : Write Part8...[NVTable] Ok 20.50.59 : Write Part9...[System] Ok 20.51.19 : Write Part10...[Kernel] 20.51.26 : Init device...ERROR! tried this file E5573cs_All_EOL_21.318.99.03.00_21.318.03.00.00_BL _FW_CD_TRIPLE 21.00.50 : --------------- Read device information ----------------------- 21.00.52 : DEAD Mode Detected = True 21.00.55 : ---------------------------------- 21.00.55 : Init Rom .. 00FF0100000F60100000007F Chk. Error! 21.00.55 : ERROR Repair BOOTCORE! Tried This File Also but same E5573cs-322_21.318.99.03.00_BL_FW 21.03.53 : --------------- Read device information ----------------------- 21.03.54 : DEAD Mode Detected = True 21.03.57 : ---------------------------------- 21.03.57 : Init Rom .. 00FF0100000F60100000007F Chk. Error! 21.03.57 : ERROR Repair BOOTCORE! Tried This File Also But Same E5573CS_21.329.63.00.284_FW.cbin (35.16MB) 21.04.28 : --------------- Read device information ----------------------- 21.04.29 : DEAD Mode Detected = True 21.04.30 : - No PACKAGE for Repair Found! 21.04.30 : ERROR Repair BOOTCORE! Now Any Way alive It...

04-17-2019, 17:42	#7 (permalink)
TestBox2 Product Manager Join Date: May 2008 Location: Ukraine Age: 45 Posts: 3,234 Member: 772096 Status: Offline Sonork: 100.69222 Thanks Meter: 8,277	1. E5573CS_21.329.63.00.284_FW.cbin Need use for simple write without biot mode. 2. Flash files what marking with 'BL' - have loader inside and able to use in the bootpoint.