[Answered] Need Mkey full repair firmware for Huawei Modem E3331s-2

[binadam23]

As the title suggests, I need a Mkey full firmware repair file for this Huawei Modem E3331s-2 if the team has.

Was updating the modem using official Huawei file and the USB stick disconnect from the computer, since then it can only be recognized in the device manager, but not detected in Huawei update wizard again...

[TestBox2]

Originally Posted by binadam23

As the title suggests, I need a Mkey full firmware repair file for this Huawei Modem E3331s-2 if the team has.

Was updating the modem using official Huawei file and the USB stick disconnect from the computer, since then it can only be recognized in the device manager, but not detected in Huawei update wizard again...

Hello, can you read any info via Mkey from modem ?


I have upload one fw for test: https://www.sendspace.com/file/xk3475

Try write direct, and also can play with BootPoint.

[TestBox2]

I not see any reply by result. If no result, then i not have reason to help. all simple.

[binadam23]

Sorry am a little busy with some personal issues...

here is the log

 15.44.28 : --------------- Read device information -----------------------
 15.44.29 : DEAD Mode Detected = True
 15.44.31 : ----------------------------------
 15.44.31 :  Init Rom .. 00FF01000002EC0000200085 Chk. Error!
 15.44.31 : ERROR Repair BOOTCORE!

[TestBox2]

Originally Posted by binadam23

Sorry am a little busy with some personal issues...

here is the log

 15.44.28 : --------------- Read device information -----------------------
 15.44.29 : DEAD Mode Detected = True
 15.44.31 : ----------------------------------
 15.44.31 :  Init Rom .. 00FF01000002EC0000200085 Chk. Error!
 15.44.31 : ERROR Repair BOOTCORE!

Ok dear, try write fw and report after when you can.

[binadam23]

Originally Posted by TestBox2

Ok dear, try write fw and report after when you can.

Hello Sir

It's while trying to write the FW that I received the above error, pls give me another flat me try...


Sent from my TECNO AX8 using Tapatalk

[TestBox2]

Originally Posted by binadam23

Hello Sir

It's while trying to write the FW that I received the above error, pls give me another flat me try...


Sent from my TECNO AX8 using Tapatalk

Show me read info from ur modem.

And make me pcb pictures where i can see cpu and flash.

[binadam23]

Originally Posted by TestBox2

Show me read info from ur modem.



And make me pcb pictures where i can see cpu and flash.

Here is the error I get while trying to read info

 20.55.35 : --------------- Read device information -----------------------
 20.55.37 : DEAD Mode Detected = True
 20.55.37 : - Select Valid FW and Repair modem.

Attached below was the image of the pcb

[TestBox2]

Originally Posted by binadam23

Here is the error I get while trying to read info

 20.55.35 : --------------- Read device information -----------------------
 20.55.37 : DEAD Mode Detected = True
 20.55.37 : - Select Valid FW and Repair modem.

Attached below was the image of the pcb

Thx for info, i see the not same as E3131 and not compatible with my FW.

[TestBox2]

Try this FW: use normality flashing, cos i not have usbloader
https://www.sendspace.com/file/9ho95y

[binadam23]

Originally Posted by TestBox2

Try this FW: use normality flashing, cos i not have usbloader
https://www.sendspace.com/file/9ho95y

here is the error i get

 22.50.03 : --------------- Read device information -----------------------
 22.50.04 : DEAD Mode Detected = True
 22.50.05 :  - No PACKAGE for Repair Found!
 22.50.05 : ERROR Repair BOOTCORE!

how to use Normality flashing while the modem is dead already?

[TestBox2]

Originally Posted by binadam23

here is the error i get

 22.50.03 : --------------- Read device information -----------------------
 22.50.04 : DEAD Mode Detected = True
 22.50.05 :  - No PACKAGE for Repair Found!
 22.50.05 : ERROR Repair BOOTCORE!

how to use Normality flashing while the modem is dead already?

If modem give any comport and Mkey can read info then try write FW.

If not - then need BootPoint, but this FW not have BL - part, because i not have loader for this modem, and i not have modem in my hands for try configure loder from other model. So .. make utilise this old trash.Or send me samples for learn.

Thats all.

[binadam23]

Originally Posted by TestBox2

If modem give any comport and Mkey can read info then try write FW.

If not - then need BootPoint, but this FW not have BL - part, because i not have loader for this modem, and i not have modem in my hands for try configure loder from other model. So .. make utilise this old trash.Or send me samples for learn.

Thats all.

I guess will have to keep to near future when solution is available, thanks again for your assistance...